ملخص المحتوى في الصفحة رقم 1
EDR1600
16 CHANNEL
DIGITAL VIDEO RECORDER
INSTRUCTION MANUAL
Before installing and using this unit, please read this manual carefully.
Be sure to keep the manual handy for later reference.
ملخص المحتوى في الصفحة رقم 2
Administrator’s Guide and Operating Instructions WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: This equipment has been tested and found to comply with the limits for a Class “A” digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference whe
ملخص المحتوى في الصفحة رقم 3
Administrator’s Guide and Operating Instructions PRECAUTIONS Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation opening or slots on the cover. Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service. Do not attempt to disassemble the appliance. To prevent electric shock, do not remove scr
ملخص المحتوى في الصفحة رقم 4
Administrator’s Guide and Operating Instructions Table of Contents 1. Product Overview………………….……………………….……... 1 1.1 Features…………………..……….…………..…………………... 1 1.2 Technical Overview…….….…….………………………….…….. 2 2. Front & Rear Panels….…….……………………………….……. 5 3. System Installation…….…….……………………………….…… 8 3.1 Before Installation…….……….…………………………….……. 8 3.2 Basic Connections…………….…………………………….…….. 9 3.3 Optional Connections…………..…………………………….…… 9 4. Main Screen…………………………………………..……….…... 11 5. Basic Operations
ملخص المحتوى في الصفحة رقم 5
Administrator’s Guide and Operating Instructions 1. Product Overview The PowerPlex EDR1600 is a state-of-the-art digital video recorder that brings unparalleled price/performance video surveillance, recording and playback to the CCTV systems. With parallel processing architecture, high performance video engine, and intelligent recording algorithms, triplex operation can be easily achieved without sacrificing the increasing demands of performance, reliability, and availability in the CCTV
ملخص المحتوى في الصفحة رقم 6
Administrator’s Guide and Operating Instructions 1.2 Technical Overview 1.2.1 Video Input and Output The digital video recorder is designed to support either NTSC/EIA or PAL/CCIR standard. To make the auto detection of video standard work, at least one camera must be connected to the video input. The product features video camera inputs with a passive looping output for each. Camera input impedance termination is set independently for each camera automatically. Synchronizing or
ملخص المحتوى في الصفحة رقم 7
Administrator’s Guide and Operating Instructions disk, ZIP disk, etc. in .MPG format for MPEG-1 encoded video or .MOV format for JPEG encoded video. For Time-Lapse Mode Recording Time, please refer to Appendix B. 1.2.4 Motion Detection The digital video recorder continuously monitors all camera inputs for motion. When motion is detected, the system reacts according to the motion action set by the administrator, including increase of recording frame rate, sounding the buzzer, tri
ملخص المحتوى في الصفحة رقم 8
Administrator’s Guide and Operating Instructions 1.2.7 Expandable IDE Hard Disk Architecture All the other HDD-based digital video recorders support only 1-4 hard disks. If those recorders do support more hard disks, they usually use RAID (Redundant Arrays of Independent Disks) or SCSI disks, which are very expensive. With the Expandable IDE Hard Disk Architecture, the EDR1600 can support up to 18 pieces of IDE hard disks that are hot swappable. With 40 GB of storage per hard
ملخص المحتوى في الصفحة رقم 9
Administrator’s Guide and Operating Instructions 2. Front & Rear Panels The following is a brief overview of the front panel and rear panel of EDR1600. Rear Panel 0. Power Switch From Rear Panel 1. Power Selector Switch: 115V AC or 230V AC selector switch. Warning: To avoid damaging the system, set this switch before plugging in the power plug. Use a screwdriver to set the switch to the correct position so that the number shown is the same as the local AC voltage. 2. Power Socke
ملخص المحتوى في الصفحة رقم 10
Administrator’s Guide and Operating Instructions 5. USB Connector: Reserved. 6. RS-232 Connector: Com 1, connects to modem. 7. Printer Port Connector: Connects to printer port devices (e.g. ZIP/printer port). 8. RS-232 Connector: Com 2, connects to PTZ camera. 9. External Hard Disk Connector: Connects to External Hard Disk Array EDA800. 10. Main Monitor S-video Output (optional). 11. VGA Monitor Output. 12. Camera 16 Video Input: BNC connector for Camera 16. 13. Main Moni
ملخص المحتوى في الصفحة رقم 11
Administrator’s Guide and Operating Instructions Front Panel 25. Hard Disk Trays: Hard disk holders for HDD#1 (upper tray) and HDD#2 (lower tray). Note: Please make sure to set HDD#1 as master and HDD#2 as slave. The settings should be described on the hard disk itself or in the manual come with the hard disk. 26. Floppy Drive: 3.5”, 1.44MB. 27. LEDs, Reset Button and Power Switch: LEDs for power and HDD indication, Reset Button to reset the system, and Power Switch to power on/off the sys
ملخص المحتوى في الصفحة رقم 12
Administrator’s Guide and Operating Instructions 3. System Installation The installations described below should be made by qualified service personnel or system installers. 3.1 Before Installation Please make sure to set the Power Selector Switch before plugging in the power plug to avoid damaging the EDR1600. Use a screwdriver to set the switch to the correct position so that the number shown is the same as the local AC voltage. Please refer to the following diagram for the system connecti
ملخص المحتوى في الصفحة رقم 13
Administrator’s Guide and Operating Instructions 3.2 Basic Connections Cameras Connect each of the camera video input connector to the video output from a camera or other composite video source. At least one camera must be connected before the system is running for the auto detection of video standard to take effect. VGA Monitor Connect the VGA monitor output connector to a VGA monitor. The VGA monitor displays selected live or recorded cameras in any available format. Mouse Connect a PS2
ملخص المحتوى في الصفحة رقم 14
Administrator’s Guide and Operating Instructions Keyboard Connect the Keyboard Connector to a standard AT keyboard. ZIP / Printer Port If the user wants to use ZIP/Printer Port to retrieve important recorded images, it must be connected to the Printer Port Connector at system startup. EDA800 Connect the External Hard Disk Connector to EDA800 if the user has purchased EDA800. If EDR1600 is running, please power on EDA800 first, and then make the connection. Main TV Monitor Connect the Ma
ملخص المحتوى في الصفحة رقم 15
Administrator’s Guide and Operating Instructions 4. Main Screen The diagram above is the main screen display. The icons on the lower corner of the screen are mainly for control and configuration, those on the right corner for status indication. If any icon is grayed, it means that the specific function is not accessible in the current mode or login right. The followings are a brief description for each of the icons. System time in military hour format. Move the cursor on it, and the syst
ملخص المحتوى في الصفحة رقم 16
Administrator’s Guide and Operating Instructions Alarm Event Log – To view the event log. Config – To configure (setup) the behaviors of the system. TV Overscan/Underscan – To change the display size of the Main TV Monitor. Login – To login the system as Administrator, Supervisor or Operator. Sequence Mode / Static Page Mode – To toggle between Sequence Mode and Static Page Mode. In Sequence Mode, each page in the designated sequence will be shown for its preset dwelling time sequentially.
ملخص المحتوى في الصفحة رقم 17
Administrator’s Guide and Operating Instructions There are 4 kinds of devices in the status indication. The displaying order is Camera, Alarm Output, Hard Disk, Alarm Input, then back to Camera. Each status bar stands for the status of one device, the bottommost for ID#1. There are 5 different colors: GRAY/BLACK – Not existent or not installed, GREEN – Normal, YELLOW – Video Loss detected for Camera, Alarm for Alarm Input/Output, and Recording for Hard Disk, and RED – Motion detected for C
ملخص المحتوى في الصفحة رقم 18
Administrator’s Guide and Operating Instructions There are 4 kinds of event logs: Alarm, Motion, Video Loss, and Power On/Off. To view the event Log display, please click on the Log icon. The screen will be shown as below: If you logged in as Administrator, the Delete button and Delete All button will be enabled. Click on the Delete button to delete the highlighted event log, and click on the Delete All button to delete all the event logs. 5.1 Version Display Click on the logo icon on th
ملخص المحتوى في الصفحة رقم 19
Administrator’s Guide and Operating Instructions 6. Setup (Administrator) To login as an Administrator, please click on the Login icon, and enter the appropriate Administrator’s Login name and Password (the factory default value for both of them is admin). To setup the behaviors of the system, please click on the Config icon. The configuration menu will pop up as below. Click on the menu item for the respective configuration. For the details of each item, please refer to the following paragr
ملخص المحتوى في الصفحة رقم 20
Administrator’s Guide and Operating Instructions 6.1 Time Type Setup The behavior for the system is the same when it’s in the same time Type (or Time Mode). Please refer to Camera Setup and Motion Setup for how they depend on Time Type. There are 2 default Time Types, On duty and Off duty, in the system. However, you may configure up to 16 Time Types to suit your needs. Use the meaningful names no matter they are from human viewpoint or the system’s viewpoint. Some other meaningful name