ملخص المحتوى في الصفحة رقم 1
Add Auxiliary Audio to
Your Factory Radio
Owner’s
Manual
PXAUX
iSimple®
A Division of AAMP of America™
13190 56th Court Clearwater, FL 33760
Ph. 866-788-4237
support@isimplesolutions.com
©2013 AAMP of Florida, Inc.
Rev. 01-23-13
www.isimplesolutions.com
INST020
ملخص المحتوى في الصفحة رقم 2
Table of Contents Pages Introduction 4 Compatibility Notes 4 Dipswitch Settings 4 Installation 5 Ford/Lincoln/Mercury ISFD531 6 General Motors ISGM531 6 General Motors ISGM532/ISGM533 7 General Motors ISGM534 7 General Motors ISGM535 7 Honda ISHD531 8 Hyundai ISHY531/ISHY532 8 Mazda ISMZ531 8 Nissan ISNI531/ISNI532 8-9 Toyota ISTY531 9 Volkswagen ISVW532 10 Troubleshooting 10 Warranty Information 12
ملخص المحتوى في الصفحة رقم 3
PXAUX & Optional Add-ons Factory Radio (not included) Vehicle Specific Harness (actual harness may vary) PXAUX Interface RCA Input RCA Input OR OR 3.5mm Input 3.5mm Input Your Audio Devices MP3 Player DVD Player (not included) (not included)
ملخص المحتوى في الصفحة رقم 4
Introduction ® Thank you for purchasing the iSimple PXAUX. The PXAUX is designed to provide endless hours of listening pleasure from your factory radio. To ensure that your auxiliary audio input performs correctly with your radio, we recommend that you read this entire manual before attempting installation of the PXAUX. This interface allows connectivity for two auxiliary audio inputs. Compatibility Notes Please visit www.isimplesolutions.com for the most up to date application information
ملخص المحتوى في الصفحة رقم 5
Installation 1. When making electrical connections it is always recommended that the vehicle’sbattery be disconnected from the electrical system before performing the installation. Please Note: If the radio is equipped with a built in CD Changer, please remove ALL discs before proceeding to prevent damage to the radio’s CD mechanism. 2. Carefully remove the trim panels covering the bolts that secure the radio into the dash cavity. Remove these bolts, and carefully pull the radio
ملخص المحتوى في الصفحة رقم 6
Ford/Lincoln/Mercury ISFD531 Operation Selecting AUX: Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until “AUX1” is displayed on the screen. When you press the “AUX” button, you will see the corresponding “SAT” modes, a slight delay, and then the current mode will be displayed. Selecting between AUX1 / AUX2 Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until “AUX1” or “AUX2” is displayed on the screen. General Motors ISGM531 Operation Non Navigation Sele
ملخص المحتوى في الصفحة رقم 7
General Motors ISGM532/ISGM533 Operation Selecting AUX Press the “BAND” button a few times until XM is displayed on the screen. Immediately turn the rotary knob to scroll through available sources. Once “AUX1” is displayed press PRESET 2 to select it. Selecting between AUX1 / AUX2 If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle through the available sources. Once “AUX1” or “AUX 2” is displayed on the screen press PRESET 2 to select it. General Motors ISGM534 Opera
ملخص المحتوى في الصفحة رقم 8
Honda/Acura ISHD531 Operation Satellite Radio Mode Selecting AUX Press the “XM” button to switch to SAT. Immediately turn the rotary knob or press TUNE UP to scroll through available sources. Once “AUX1” is displayed, press PRESET 6 to select it. Selecting between AUX1 / AUX2 Press the “XM” button to switch to SAT. Immediately turn the rotary knob or press TUNE UP to scroll through available sources. Once “AUX2” is displayed, press PRESET 6 to select it. CD Changer Mode Selecting AUX Press t
ملخص المحتوى في الصفحة رقم 9
Nissan ISNI531/ISNI532 Operation Selecting AUX Radios equipped with a “SAT” button Press the “FM” button and then the “SAT” button. Immediately press the “SEEK>>” button to scroll through the available sources. Once “AUX1” is displayed, press the “<
ملخص المحتوى في الصفحة رقم 10
CD Changer Mode Selecting AUX Press the “DISC” or “AUX” button to switch to CD Changer mode. You are now in the AUX1 mode. Selecting between AUX1 / AUX2 If you are currently in “AUX1” or “AUX2” mode press the “DISC ▲” button to cycle between AUX1” & “AUX 2” . Volkswagen ISVW532 Operation Selecting AUX Press the “CD” button twice to switch the radio to the CD Changer source. This will access “AUX1”. Selecting between AUX1 / AUX2 To select “AUX2” press preset #2. To select “AUX1” press preset #
ملخص المحتوى في الصفحة رقم 11
Notes 11
ملخص المحتوى في الصفحة رقم 12
Warranty Information One Year Limited Warranty The quality controls used in the manufacture of this product will ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized ® iSimple dealer. This warranty covers any supplied or manufactured parts of this prod- ® uct that, upon inspection by iSimple authorized personnel, is found to have failed in normal use due to defects in material or workmanship. This warranty does not apply to insta
