ملخص المحتوى في الصفحة رقم 1
TABLE OF CONTENTS
GETTING STARTED TIMER RECORDING
Accessories...................................................................... 1 Setting the timer ........................................................... 26
®
Important safety instructions ......................................... 2 Timer Record using the G-Code system ................... 27
Warnings, cautions and others ...................................... 3
FLEX TIME
Disc information ...................................................
ملخص المحتوى في الصفحة رقم 2
IMPORTANT SAFETY INSTRUCTIONS 1) Read instructions. Read all the safety and operating cable system is connected to the product, be sure the antenna instructions before operating the product. or cable system is grounded so as to provide some protection 2) Retain instructions. Keep the safety and operating against voltage surges and built-up static charges. Article 810 instructions for future reference. of the National Electrical Code, ANSI/NFPA 70, provides 3) Heed warnings. Adhere to all warnin
ملخص المحتوى في الصفحة رقم 3
WARNINGS, CAUTIONS AND OTHERS THE FOLLOWING APPLIES ONLY FOR U.S.A. CAUTION! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection CAUTION! against harmful interference in a residential installation. TO REDUCE THE RISK OF ELECTRIC SHOCK, This equipment generates, uses and can radiate radio DO NOT REMOVE THE COVER OF THIS UNIT. THERE ARE NO USER SERVICEABLE P
ملخص المحتوى في الصفحة رقم 4
DISC INFORMATION n Playable Disc types Disc Types Logos Characteristics This unit can playback DVD-Video discs and the DVD-VIDEO region code is printed on the rear of the unit. DVD R, DVD RW and DVD R, DVD RW, discs DVD R/RW written in the DVD-Video format and finalized. DVD R/RW Video with CD sound, VHS quality & MPEG-1 Video CD (VCD) compression technology. Super Video CD (SVCD) CD is recorded as a Digital Signal with better audio Audio CD quality, less distortion a
ملخص المحتوى في الصفحة رقم 5
CONTROLS AND DISPLAYS The Remote Control Remote Control 1) CH+, CH- buttons ( , ) 2) Open/Close button ( OPEN/CLOSE) 3) Copy button (COPY) 4) Flex Timer button (FLEX TIME) 5) Numeric buttons (0, 1~9) 6) Guide button ( GUIDE) 7) Navigation button ( NAVI) 8) Source button (SOURCE) 9) Disc menu button (DISC MENU) 10) Cursor (pqtu), OK buttons (OK) 11) Play button ( PLAY) 12) Stop button ( STOP) 13) Skip buttons ( PREVIOUS/ NEXT ) 14) Record button (RECORD) 15) HDD/DVD button (HDD/DVD) 16) POWE
ملخص المحتوى في الصفحة رقم 6
CONTROLS AND DISPLAYS Front panel connections (for reference only) Names of parts and controls 7) OPEN/CLOSE Button Opens or closes the disk tray. 1) POWER ON/OFF Button Turns the recorder on and off. 8) PLAY Button Plays a disk. 2) DISC TRAY Holds discs securely during recording or playback 9) STOP Button Stops playing or recording a disk. 3) DV-LINK (IEEE-1394) Jack Connects digital video camcorders to this DVD Recorder. 10) HDD/DVD Button Press to switch between HDD and DVD. 4) DVD Indicator
ملخص المحتوى في الصفحة رقم 7
CONTROLS AND DISPLAYS Rear panel connections (for reference only) Names of parts 1) TUNER(TV/ANTENNA) Jacks 5) LINE OUT (VIDEO/AUDIO L/R) Jacks Connects TV/ANTENNA for signal output/input. Composite signal output. Note: Playback signals don ’ t go through here. Make 6) LINE OUT (S-VIDEO) Jack proper connections before using this DVD Recorder. S-Video signal output. 2) LINE IN (S-VIDEO) Jack 7) DIGITAL AUDIO OUT (COAXIAL) Jack S-Video signal input. Connects an amplifier or receiver having a digit
ملخص المحتوى في الصفحة رقم 8
CONNECTIONS Before making connections 1) Do not plug the AC power cord into the outlet until all other connections are made. 2) Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a viewing problem when playing back a copy-protected disk. You may also have a viewing problem when connecting the unit to an integrated TV/Video system. Connecting to the antenna outlet and the television Before using the unit, follow the s
ملخص المحتوى في الصفحة رقم 9
FOR BETTER VIDEO QUALITY There are two types of connections (S-Video, and Component video) that provide higher quality viewing. 1. Connecting to a TV via S-Video out Connecting to a TV with a S-Video jack Use a S-Video cable (not supplied) to connect the S-Video output on the unit to the S-Video input on the television. Notes: 1. Enter system setup to enable S-Video (refer to the section titled “Quick Setup”). 2. When using S-Video connections, please remove all other video output connections.
ملخص المحتوى في الصفحة رقم 10
FOR BETTER AUDIO QUALITY There are two types of audio connections, analog and digital. Connecting to a stereo audio amplifier or receiver Use an audio cord to connect the AUDIO OUT on the unit to the audio input on a stereo amplifier or a receiver. Connecting to a digital audio device Connect an amplifier with Dolby Digital and DTS decoders to enjoy surround sound. Digital out optical Use a fiber-optic cable (not supplied) to connect the DIGITAL OUT OPTICAL (digital optical output) on the unit t
ملخص المحتوى في الصفحة رقم 11
CONNECTING SATELLITE RECEIVER OR CABLE BOX Connecting the cable box/satellite box and television Before using the unit, follow the steps below to connect the unit to the cable box and TV. Connecting to a satellite box or a cable box with COMPOSITE jacks Use AUDIO/VIDEO cables to connect the AUDIO/VIDEO output of the unit to the AUDIO/VIDEO input on the cable box or satellite receiver. 11
ملخص المحتوى في الصفحة رقم 12
SYSTEM MENU 2. Select “System” using [p] [q] and press [OK]. Remote Control & system menu 3. Select “video output” as “COMPONENT” or “PROGRESSIVE” Follow the steps below to reset personal preferences for using using [p] [q] and press [OK]. (Reference the “GUI operation” the DVD recorder. Confirm that all connections are secured section for details) properly. 4. When all settings are correct, press [t] to return to the 1. Press [ STANDBY-ON] to turn on the unit. main menu. 2. Press [SYSTEM MENU]
ملخص المحتوى في الصفحة رقم 13
TV CHANNEL SETUP TV channel scanning 9. The channel scanning starts. This process may take a few minutes. When the “scan channel” function is activated, the TV channels are searched and stored in a specific order. If the channel 10.When all the TV channels have been searched assignment of your TV content provider is changed or if you are and stored, press [SYSTEM MENU] to exit. reinstalling this DVD recorder, you may need to start this procedure again.This will replace the TV channel stored with
ملخص المحتوى في الصفحة رقم 14
CHANNEL EDITOR To access to the Channel Editor menu, press [SYSTEM MENU], Swapping TV channels select “TV TUNER,” “Utilities,” “Edit channel” and press [OK]. This function allows you to manually swap the TV channel order Or, press [SOURCE] to set “TV” as the input signal source and stored in the unit to match the TV channel order stored in your press [EDIT]. Either way, the Channel Editor menu will be TV set. displayed. 1. Press [p] [q] to select a TV Channel and press Moving up or moving down
ملخص المحتوى في الصفحة رقم 15
® CHANNEL EDITOR Setting up G-Code system Thanks to this programming system, you no longer need to Turning on or turning off TV channels manually tediously enter the date, programme number, start and end times. All the information needed by the DVD recorder for After you have performed the channel scanning process, you ® programming is contained in the G-Code programming number. may like to add or delete some of the TV channels. This function ® This 9-digit G-Code programming number is found in
ملخص المحتوى في الصفحة رقم 16
GUIDE MENU: PLAYBACK 6. Press [ PAUSE] to pause playback. Guide menu is a unique user interface to guide Press [ PLAY] to resume normal playback . you through basic functions of this recorder. By Press [ STOP] to stop playback at a marked stop. using the Guide menu, it is less time-consuming Press [ STOP] twice to bring the playback to a full stop. to operate this system. Users no longer need to go through normal operations that may require Playback music files far more steps and different i
ملخص المحتوى في الصفحة رقم 17
GUIDE MENU: PLAYBACK, RECORD Playback pictures with music Record on the HDD 1. Press [ GUIDE] to display the Guide menu. 1. Press [ GUIDE] to display the Guide menu. 2. Press [p] [q] to select “Record” and then 2. Press [p] [q] to select “Playback” and then press [OK]. press [OK]. 3. Press [p] [q] to select DVD or HDD and then press [OK]. 4. Press [p] [q] to select “Pictures with music” and press [OK]. The browser menu of picture files will be displayed. 3. Press [p] [q] to select the Si
ملخص المحتوى في الصفحة رقم 18
GUIDE MENU: RECORD, TIMER RECORD Record on DVD Timer Record (Date/Time Setting) 1. Press [ GUIDE] to display the Guide menu. 1. Press [ GUIDE] to display the Guide menu. 2. Press [p] [q] to select “Record” and then 2. Press [p] [q] to select “Timer Record” and press [OK]. then press [OK]. 3. Press [p] [q] to select “Date/Time Setting” and 3. Press [p] [q] to select the Signal-Input (TV, press [OK]. AV1, AV2, S-Video, DV ) and press [OK]. If you select “TV,” press [p] [q] to select the chann
ملخص المحتوى في الصفحة رقم 19
GUIDE MENU: TIMER RECORD 7. Press [p][q] [t] [u] or the numbered buttons If you select “TV” in step 4, press [p] [q] to select TV audio and (0~9) to set the time and press [OK] when press [OK]. done. 11. The “Timer Record information” will appear and press [OK] to confirm the settings. 8. Press [p][q] to set “Length” and then press [OK] . 13. Press [u] and [OK] to exit the timer record 9. Press [p][q] to select “Device” and then press settings. [OK] . 14. Press [ STANDBY-ON] to turn the
ملخص المحتوى في الصفحة رقم 20
GUIDE MENU: TIMER RECORD, COPY 6. Use the numbered buttons to enter the G-Code programming number and then press [OK] . 3. Press [p] [q] to select “From HDD to DVD” and press [OK]. 7. After entering the G-Code programming number, the “GCN” and “Present channel number” will be displayed. Press [OK] to set the preset the channel. 4. Press [ OPEN/CLOSE] to open the disc tray and insert a recordable DVD disc. Press the button again to close the tray. The disc preparation process will take place
