Havis-Shields Telescoping Computer Base C-TCB-17 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALL INSTRUCTIONS C-TCB-17
TELESCOPING COMPUTER BASE
1997-2003 FORD F-150 PICK-UP
2004 FORD F-150 (HERITAGE ONLY) PICK-UP

NOTE: HERITAGE IS 2003 BODY STYLE CARRIED OVER TO 2004. FOR 2004
FORD F-150 NEW BODY STYLE USE C-TCB-31

TOOLS REQUIRED:
3/16” Allen wrench Ratcheting wrench (3/8” drive)
3/8” Standard socket set Powered drill w/ 3/16” drill bit
3/8” Metric socket set Open-end wrench set

HARDWARE & COMPONENTS:
QTY DESCRIPTION PART #
1 Pole support assembly CM93071-1

ملخص المحتوى في الصفحة رقم 2

SUB ASSEMBLY: 1. Confirm receipt of all hardware and components. 2. Remove front inner and outer passenger seat bolts on vehicle. INSTALLATION: 1. Mount C-TCB-17 into vehicle: • Position pole support assembly between seat base mount and floor of vehicle • Align holes in pole support assembly with holes in seat base. • Loosely attached factory seat bolts that were removed during subassembly. • Pre-drill floor of vehicle at the location of the hole on the pole support assembly usin