Havis-Shields Telescoping Computer Base C-TCB-12 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALL INSTRUCTIONS C-TCB-12
TELESCOPING COMPUTER BASE
1992-1996 FORD BRONCO

TOOLS REQUIRED:
3/16” Allen wrench 3/8” Ratcheting wrench
3/8” Standard socket set Open-end wrench set
3/8” Torx set Powered drill w/ 3/8” drill bit

HARDWARE & COMPONENTS:
QTY DESCRIPTION PART #
1 Pole support assembly CM93071-12
1 Telescoping pole assembly CM93072-3
1 Side support brace CM93162
1 5/16-18 Nylock nut GSM30017
1 5/16” Flat washer GSM31006
2 ¼ x 1Hex head lag bolt GSM33060
Side suppor

ملخص المحتوى في الصفحة رقم 2

SUB ASSEMBLY: 1. Confirm receipt of all hardware and components. 2. Loosen or remove front inner and outer passenger seat bolts on vehicle. Always! Read all instructions before installing any Havis-Shields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! Use hardware provided with install kit INSTALLATION: 1. MOUNT C-TCB-12 INTO VEHICLE: • Position Pole support assembly on top of passenger seat base front mount.