Havis-Shields 2004-2008 Ford Econoline Van C-VS-1800-ECO دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALL INSTRUCTIONS C-VS-1800-ECO
2004-2008 FORD ECONOLINE VAN


TOOLS REQUIRED:
3/8” Standard Socket Set Powered drill w/ drill bit set
3/8” Metric Socket Set Open-end wrench set
3/8” Ratcheting Wrench Screw driver set

HARDWARE & COMPONENTS:
QTY DESCRIPTION PART #
6 ¼-20 Nylock nut GSM30016
4 ¼” Flat washer GSM31005
2 ¼-20 x ¾” Carriage bolt GSM32000
4 ¼-20 x 1 ¼” Hex head bolt GSM33003
4 #10 x 1” Phillips sheet metal screw GSM33196
1 Torx Screw Hardware Kit C-HK-1
Always!

ملخص المحتوى في الصفحة رقم 2

3. Remove mount brackets from console housing and attach to engine cover with ¼” x 1 ¼” hex head bolts, stop nuts and fender washers. 4. Mark and drill four 5/32” diameter holes and attach floor mount plate with # 10 x 1” sheet metal screws. Also add two ¼” x ¾” carriage bolts facing up. 5. Mount and wire desired equipment into console. C-VS-1800-ECO_INST_9-07

ملخص المحتوى في الصفحة رقم 3

6. Attach Console to Mount Brackets. 7. Finished Product C-VS-1800-ECO_INST_9-07