Havis-Shields 2000-2005 Chevrolet Impala Trak-Mount Kit C-TM-IMP دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALL INSTRUCTIONS C-TM-IMP
2000-2005 CHEVROLET IMPALA TRAK-MOUNT KIT

TOOLS REQUIRED:
Ratcheting Wrench Standard Socket Set
Metric Socket Set Tape Measure
Torx Bit Set

HARDWARE:
QTY DESCRIPTION PART#
8 ¼” x ¾” hex head bolt GSM33001
8 ¼” Serrated nut GSM30023
6 ¼” x 1” Hex head lag bolts GSM33060
1 32” Trak mount CM93055-9

SUB ASSEMBLY:
1. MOUNT TRAK TO HUMP BRACKETS.
• Determine location that Trak will land on transmission hump for the specific
application.
• With T

ملخص المحتوى في الصفحة رقم 2

INSTALLATION: 1. REMOVE SEATS: • Remove rear seat base torx bolts. • Slide seat to rear most position. • Seats do not have to come out of vehicle, they will just need to be tilted out of way to place Trak-Mount assembly. Be careful of wire plugs if vehicle has power seats. 2. MOUNT ASSEMBLED TRAK-MOUNT: • Place Trak-Mount assembly so front bracket sets squarely on floor beam straddling seat bolts – lag bolt to the floor beam. The rear hump brackets are place on floor between flo