Grizzly Trailer Screw Jack H6162 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

MODEL H6162
TRAILER SCREW JACK
2000 LB.
INSTRUCTION SHEET
To reduce the risk of property damage,
serious personal injury, or death when using
this jack, take the following precautions:
• Refer to your trailer owner's manual to
verify the Trailer Net Weight does not
exceed the maximum trailer jack load
rating of 2000 lbs.
• During installation, do not place any
part of your body under the trailer
tongue. Only support the trailer tongue
with jack stands rated for more than the
figure 1. M

ملخص المحتوى في الصفحة رقم 2

Installation Operation 1. Read all safety precautions listed. 1. Read all required safety precautions listed. 2. on a level surface, chock the trailer wheels, 2. Back the tow vehicle up to the trailer tongue, raise the trailer tongue at least 18" off the then turn the jack handle to lift the trailer as ground with a floor jack or other suitable necessary to connect the trailer to the tow lifting device, then use a jack stand