Grizzly Tow Draw Bar G8732 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

MODEL G8731/G8732/
G8733
TOW DRAW BAR
INSTRUCTIONS
hitch receiver shaft
Ball hitch
Mounting
1. This tow draw bar was designed to
hole
mount into a 2" x 2" square hitch
receiver. NEvER use this product for
any purpose it was not designed for.
2. Know your load and tongue weight!
NEvER exceed the gross load towing
capacity or the tongue weight capacity
of the hitch receiver or draw bar.
hitch pin hole
tongue
3. When mounting the draw bar, only use
an approved hitch pin with a safety clip

ملخص المحتوى في الصفحة رقم 2

Note: The tow draw bar can be installed into Installation the hitch receiver in the "upper" configuration, 1. Make sure the 2" x 2" square hitch receiver as shown in Figure 2, or with the tongue in and the tow draw bar are free from debris that the "lower" configuration, depending on the could interfere with proper installation, and height of the trailer hitch. make sure that all devices used in towing are in good working condition. Maintenance & Storage 2. insert the shaft of the draw