ملخص المحتوى في الصفحة رقم 1
V9810MZ.NA1ULZ_RV0016P_ENG
Installation and Operating Guide | Warranty
Model Number | ZDX-313 | DVD Player + Video Cassette Recorder
For service/
support Call:
Toll Free Number
1-800-243-0000
© Copyright 2005, LG Electronics U.S.A., Inc.
ملخص المحتوى في الصفحة رقم 2
REGULATORY INFORMATION: FCC Part 15 CAUTION This epuipment has been tested and found to comply with RISK OF ELECTRIC SHOCK the limits for a Class B digital device, pursuant to Part 15 DO NOT OPEN of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when CAUTION: TO REDUCE THE RISK the product is operated in a residential installation. This OF ELECTRIC SHOCK product generates, uses, and can radiate radio frequency DO NOT REMOVE COVER (OR BACK)
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installa- tion, use, and servicing. This product does not contain any
ملخص المحتوى في الصفحة رقم 4
VCR Tape Recording . . . . . . . . . . . . . . . .22-25 Contents Basic Instructions . . . . . . . . . . . . . . . . . . . . .22 Timer Recording . . . . . . . . . . . . . . . . . . .22-23 Introduction . . . . . . . . . . . . . . . . . . . . . .5 Instant Timer Recording . . . . . . . . . . . . . . .24 Recording from External Components . . . . .24 Moisture Condensation . . . . . . . . . . . . . . . . . .5 Copying from DVD to VCR . . . . . . . . . . . . .25 Symbols Used in this Manual . . . . . . .
ملخص المحتوى في الصفحة رقم 5
Introduction To ensure proper use of this product, please read this About the Symbol Display owner’s manual carefully and retain for future refer- “ ” may appear on your TV display during opera- ence. tion and indicates that the function is not permitted by this unit or the disc or not available at that time. This manual provides information on the operation and maintenance of your DVD+VCR. Should the unit require service, contact an Authorized Service Center. Notes on Discs Handling Discs Moist
ملخص المحتوى في الصفحة رقم 6
Types of Playable Discs Disc-related terms MP3 DVD MP3 is a popular compression format used for digital (8 cm / 12 cm disc) audio files that yields very high near-CD quality sound. Audio CD (8 cm / 12 cm disc) WMA Windows Media Audio file. A type of coding / decod- ing developed by Microsoft Corp. In addition, this unit plays DVD-R, DVD+R, DVD-RW, DVD+RW, and CD-R / CD-RW that contains audio JPEG titles, MP3, WMA, and/or JPEG files. Joint Pictures Expert Group. JPEG is a compressed file format
ملخص المحتوى في الصفحة رقم 7
Regional Code About the Remote Control This DVD+VCR is designed and Operation Range manufactured for playback of 1 ALL region “1” encoded DVD soft- Point the Remote Control at the remote sensor and ware. This unit can play only DVD press the buttons. discs labeled “1” or “ALL”. Distance: About 23 ft (7 m) from the front of the remote sensor. Notes on Regional Codes Angle: About 30° in each direction of the front of the remote sensor. • Most DVD discs have a globe with one or more numbers in it c
ملخص المحتوى في الصفحة رقم 8
Front Panel ab DVD VCR REC PM TV cde fg h i j k l m n a Disc Tray (DVD deck) DVD+VCR is in timer recording or a timer Insert a disc here. recording is programmed (VCR part only). b Cassette Compartment (VCR deck) A cassette is in the VCR deck. Insert a video cassette here. The VCR deck is selected. VCR c 1 POWER Switches the DVD+VCR ON and OFF. DVD+VCR is Recording.(VCR part only) REC . . m m d / Indicates PM time. (AM is not displayed.) PM - DVD: Skip to beginning of current chapter or track,
ملخص المحتوى في الصفحة رقم 9
BACKWARD / FORWARD (m / M) Remote Control - DVD: Search backward or forward. - VCR: Rewinds/Advances the tape during the STOP mode, for fast backward/forward picture search. CLEAR Removes a mark on the Marker Search menu. DISC MENU Accesses menu on a DVD disc. DISPLAY Accesses On-Screen Display. CLK/CNT Switches between the clock, tape counter and tape remaining modes on the display. DVD Select the DVD+VCR function mode to DVD. ENTER Confirms menu selections. Displays functions on the TV s
ملخص المحتوى في الصفحة رقم 10
Rear Panel Caution Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. abcde f gh a ANT.IN e AUDIO OUT (Left/Right) (DVD OUT) Connect the VHF/UHF/CATV antenna to this terminal. Connect to a TV or other equipment with audio inputs. b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) f AC Power Cord Connect the audio/video output of an external source Plug into the power source. (Audio system, TV/Monitor, VCR, Camcorder). g RF. OUT
ملخص المحتوى في الصفحة رقم 11
To view or record a CATV channel Connecting an Antenna Connecting an Antenna 1. Tune the TV to the DVD+VCR output channel or Cable TV or Cable TV (CH 3 or 4). 2. Set the DVD+VCR channel selector to the cable a a Antenna: output channel. (Example: CH3) Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm 3. Select a channel using the cable converter. coaxial cable connect it directly to the jack marked ANT.IN on your DVD+VCR. If your antenna ca
ملخص المحتوى في الصفحة رقم 12
RF coaxial connection Optional TV Connections Optional TV Connections Connect the RF.OUT jack on the DVD+VCR to the These connections support only DVD playback. The antenna in jack on the TV using the supplied 75-ohm tuner and VCR still output through the RF.OUT (R) or Coaxial Cable (R). DVD/VCR OUT (A, V) jacks. How to set the DVD+VCR’s RF output Component Video / Progressive Scan channel connection 1. When the DVD+VCR is turned off, press and hold If your television is a high-definition or “
ملخص المحتوى في الصفحة رقم 13
Connecting to an amplifier equipped with two Accessory Audio/Video (A/V) Connections to channel digital stereo (PCM) or to an Audio/Video DVD+VCR receiver equipped with a multi-channel decoder Connect the VCR IN LINE 1 or LINE 2 jacks on the (Dolby Digital™, MPEG 2, or DTS) DVD+VCR to the audio/video out jacks on your 1. Connect one of the DVD+VCR’s DIGITAL AUDIO accessory component, using the optional audio/video OUT jacks (COAXIAL X) to the corresponding in cables. (Refer to page 24 for “Recor
ملخص المحتوى في الصفحة رقم 14
• AUTO CLOCK SET Initial Settings - VCR Initial Settings - VCR The Auto Clock Set feature is set to ON at the fac- tory. In the ON setting, the DVD+VCR looks for a By using the VCR Setup menu, you can make channel carrying XDS (Extended Data Services) various adjustments to items such as clock setting, information. XDS updates the clock using the and timer recordings. Coordinated Universal Time. Your DVD+VCR allows Remote Control adjustment of - Use b / B to choose ON or OFF. several features
ملخص المحتوى في الصفحة رقم 15
TUNING SETUP This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Auto Channel Programming FUNCTION OSD The on-screen display can be turned on or off. AUDIO MODE The DVD+VCR has two separate audio playback sys- tems, the high quality VHS Hi-Fi system and standard 1. Choose the SOURCE SELECT option, then use NORMAL mono system. The same audio is generally b / B to select
ملخص المحتوى في الصفحة رقم 16
LANGUAGE Initial Settings - DVD Initial Settings - DVD By using the DVD Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 16 to 19. To display and exit the Menu: Press SETUP to display the menu. A second press of SETUP will take you back to initial screen. To go to the next level: Menu Language Press B on the Remote Control. Select
ملخص المحتوى في الصفحة رقم 17
4. When the confirm menu appears on your screen DISPLAY “Cancel” is highlighted as default. Use the b button to highlight “Enter”. 5. Pressing ENTER will set this unit to progressive scan mode. TV Aspect DVD Notes: 4:3 : Select when a standard 4:3 TV is connected. • If you set Progressive Scan to ON in error, you must 16:9 : Select when a 16:9 wide TV is connected. reset the DVD+VCR. Press STOP (x) and hold it for more then five seconds before releasing it. The video output will be restored to t
ملخص المحتوى في الصفحة رقم 18
AUDIO OTHERS Each DVD disc has a variety of audio output options. The Auto Play, and B.L.E. settings can be changed. Set this unit’s AUDIO options according to the type of audio system you use. Auto Play DVD Dolby Digital / DTS / MPEG DVD You can set up the DVD+VCR so a DVD disc auto- Bitstream: Select “Bitstream” if you connect the matically starts playing whenever the DVD is insert- DVD+VCR’s DIGITAL AUDIO OUT jack to an ed. amplifier or other equipment with a Dolby Digital, If Auto Play mod
ملخص المحتوى في الصفحة رقم 19
4. Press ENTER to confirm your rating selection, LOCK (Parental Control) then press SETUP to exit the menu. 5. Press OPEN/CLOSE (Z) to activate parental control. Password (Security Code) You can enter or change password. 1. Select “Password” on the LOCK menu then press B. 2. Follow step 2 as shown left column (Rating). To change the password, select the “Change”, Rating DVD press ENTER and input the new 4-digit code then Some movies contain scenes that may not be suitable press ENTER. Input
ملخص المحتوى في الصفحة رقم 20
Operation This chapter describes how to operate the VCR and Manual Tracking DVD. To manually adjust the tracking use the CH/TRK (v/V) buttons on the Remote Control or CH (v/V) on the VCR Tape Playback VCR Tape Playback front panel during playback. Press the VCR button to select the device to be oper- ated. Notes: •Vertical jitter requires a very fine adjustment. •Tracking is automatically reset to normal when the tape Basic Instructions is ejected or the power cord is unplugged for more than 3 s
