ملخص المحتوى في الصفحة رقم 1
R
FP-N40CX
AIR PURIFIER
OPERATION MANUAL
PURIFICATEUR D’AIR
MANUEL D’UTILISATION
Floor / Tabletop type
Type mobile
*Plasmacluster is a trademark of
Sharp Corporation.
*Plasmacluster est une marque de
commeree de Sharp Corpration.
ENGLISH
FRANÇAIS ENGLISH
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
ENGLISH FEATURES CONTENTS Plasmacluster Ion Control • FOR YOUR PROTECTION (U.S.) ...............E-2 The unit controls the ratio of negative ions • CONSUMER LIMITED WARRANTY (U.S.) .E-3 and positive ions depending on the con- • FOR YOUR PROTECTION (CANADA) .......E-4 dition of the room. • LIMITED WARRANTY (CANADA) ...............E-5 • Clean Mode SAFETY PRECAUTIONS ........................ E-6 Approximately the same numbers of posi- tive and negative ions are discharged. • RISK OF ELECTRIC SHOCK .
ملخص المحتوى في الصفحة رقم 4
FOR YOUR PROTECTION (the United States) To aid in answering questions if you call for service or for reporting loss or theft, please record below the model and serial number located on the back side of the unit. MODEL NUMBER SERIAL NUMBER DATE OF PURCHASE Dealer Name Address City State Zip Telephone TO PHONE: Dial 1-800-BE-SHARP (237-4277) for: SERVICE (for your nearest Sharp Authorized Servicer) PARTS (for your Authorized Parts Distributor) ACCESSORIES ADDITIONAL CUSTOMER INFORMATION TO WRITE:
ملخص المحتوى في الصفحة رقم 5
CONSUMER LIMITED WARRANTY CONSUMER LIMITED WARRANTY FOR THE U.S. USERS SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the per
ملخص المحتوى في الصفحة رقم 6
FOR YOUR PROTECTION (Canada) To aid in answering questions if you call for service or for reporting loss or theft, please record below the model and serial number located on the back side of the unit. MODEL NUMBER SERIAL NUMBER DATE OF PURCHASE Dealer Name Address City Province Postal Code Telephone TO PHONE: Dial 1-905-568-7140 for: SERVICE (for your nearest Sharp Authorized Servicer) PARTS (for your Authorized Parts Distributor) ACCESSORIES ADDITIONAL CUSTOMER INFORMATION TO WRITE: For servic
ملخص المحتوى في الصفحة رقم 7
T H R O U G H T C S U E S B T O E H R LIMITED WARRANTY Consumer Electronics Products Congratulations on your purchase! Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first con- sumer purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that this product is free, under normal use and maintenance, from any defects in materi
ملخص المحتوى في الصفحة رقم 8
SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK • These servicing instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating in- structions unless you are qualified to do so. •To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the p
ملخص المحتوى في الصفحة رقم 9
CAUTIONS CONCERNING THE OPERATION OF THIS PRODUCT • Do not block the intake and air outlet. • Do not use the unit near or on hot objects, such as a stove. Also, do not use the unit where it may come into contact with steam. • Do not use the unit on its side. Deformation, malfunction and/or overheating of the motor may occur as a result. • Do not install when there is generation of oily residue, such as in a kitchen. • Do not use detergent when cleaning the unit. The unit surface may become damag
ملخص المحتوى في الصفحة رقم 10
PART NAMES MAIN UNIT DISPLAY Filter Indicator Light If the Filter Indicator Light is lit, the Washable Active Carbon Filter needs to be cleaned. AUTO Operation Pollen Mode Fan Level OFF Timer Display Indicator Lights Indicator Light Indicator Light (set using remote control) Indicator Light OFF TIMER FILTER AUTO SILENT MED HIGH MAX POLLEN CLEAN-SIGN Plasmacluster CLEAN-SIGN LIGHT The color changes according to the air condition. Clean (Green) Slightly Impure (Orange) Very Impure (Red) Remote Con
ملخص المحتوى في الصفحة رقم 11
MOUNTING THE STAND PLASMACLUSTER INDICATOR LIGHT Plasmacluster ion operation is selected using the remote Please mount the stand before use. control. Remove the Front Panel. 1 Blue light • At this time, also remove the Pre-Fil- When the Plasmacluster ion operation is in Clean Mode, ter, Washable Active Carbon Filter or in AUTO Plasmacluster Ion Mode and the air in the and the True HEPA Filter. room is impure, the light will activate and the unit will operate in Clean Mode. 1 Front Panel Green li
ملخص المحتوى في الصفحة رقم 12
Be sure to remove the power plug from the wall outlet. PREPARATION FILTER INSTALLATION To maintain the quality of the filters, they are placed in the main unit within plastic bags. Be sure to remove the filters from the plastic bags before using the unit. Filters Removal 1 Place the unit facing up 1 Place so that Lay the unit on a flat surface such as a table, stand does not making sure that the stand does not contact the touch surface. surface. Soft cloth Table, etc. 1 Front Panel Remove the Fr
ملخص المحتوى في الصفحة رقم 13
FRONT outlet. Filter Installation 2 True HEPA Filter After the True HEPA Filter is removed Tabs 1 from the plastic bag, and place it in the main unit with the tabs facing up. (See the diagram to the right.) Ensure that the filter is installed correctly. Do not install the filter backwards or the unit will not operate properly. Ensure the bands are uppermost After removing the Washable Active 2 Carbon Filter from the plastic bag, place it on top of the True HEPA Filter with the bands (2 places)
ملخص المحتوى في الصفحة رقم 14
For the first 30 seconds after the power plug is inserted into the wall outlet, the unit will check the conditions of the air. If OPERATION operation is set to ON during this time, the CLEAN SIGN LIGHT will alternately flash in green, orange and red. MAIN UNIT OPERATION Main Unit Controls • AUTO • SILENT • MEDIUM • HIGH • MAX • POLLEN MODE-ON/OFF Button OFF TIMER FILTER AUTO SILENT MED HIGH MAX POLLEN CLEAN-SIGN Plasmacluster Plasmacluster Indicator Light The unit will start operating when the M
ملخص المحتوى في الصفحة رقم 15
Operations available with the Remote Control • AUTO • MANUAL • POLLEN • OFF TIMER REMOTE CONTROL OPERATION • DISPLAY ON/OFF Plasmacluster Ion mode • When you press the POWER ON/OFF Button, a short selections beep will sound and operation will start. As the initial • AUTO operation mode, it automatically goes to the AUTO (Fan • CLEAN level) and AUTO Plasmacluster Ion Mode. • ION CONTROL • OFF •To stop operation, press the POWER ON/OFF Button again. A long beep will sound and operation will stop.
ملخص المحتوى في الصفحة رقم 16
CARE AND MAINTENANCE WASHABLE ACTIVE CARBON FILTER CARE Allow the filter to 3 HAND WASH ONLY! soak approxi- mately 30 min- DO NOT TUMBLE DRY! utes before washing. Care Cycle If the filter surface is When the Filter Indicator Light very dirty, scrub with comes on, this indicates that the fil- an old toothbrush or ter needs to be cleaned. If the unit the like. is kept on 24 hours a day then the Filter Indicator Light will activate in about 2 months. CAUTION The Filter Indicator Light is for ref- e
ملخص المحتوى في الصفحة رقم 17
FILTER CLEANING Clean the top surface of the Pre-Filter Dry the filter out- 6 lightly with a vacuum cleaner. doors if possible in a well ventilated Pre-Filter area. CAUTION • Let the filter dry thoroughly. If used while the filter is still moist, then the air that is exhausted from the main unit will have an odor. It may take 1 or 2 days to dry. • Dry the filter outdoors in a well ventilated area. If dried indoors, it may give an odor. In addi- NOTE tion, the water dripping off the filter may so
ملخص المحتوى في الصفحة رقم 18
CARE AND MAINTENANCE (To maintain optimum performance of this product, please clean the unit including its sensor and fiters periodically.) When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result. MAIN UNIT To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to remain, they may become hard to clean. Wipe with a dry, soft cloth For stubborn stains or d
ملخص المحتوى في الصفحة رقم 19
CARE AND MAINTENANCE FILTER REPLACEMENT GUIDELINES • The replacement period differs depending on the usage hours and loca- tion of installation. • Some odor ingredients absorbed by the filters may become separated and may be discharged through the air outlet and result in additional odor. Depending on the usage environment, the air outlet odor may become strong after several months. If dust or odors cannot be removed easily, replace the filters. (Refer to E-1 FILTER MAINTENANCE) Guide for filter
ملخص المحتوى في الصفحة رقم 20
OPERATION GUIDE ODOR SENSOR GUIDELINES • The odor sensor responds to cigarette and pet odors, as well as other scents such as Insec- ticide, cosmetics, spray, alcohol, or sudden changes in temperature or humidity. • When the unit is in Auto Mode and room is in a closed environment the sensor will respond to some odors by increasing the air flow. If you do not desire increased air flow, please adjust the sensitivity of the sensor. FILTER RESET • Once the Washable Active Carbon Filter has been cl
