ملخص المحتوى في الصفحة رقم 1
3-283-045-11(1)
DVD Home Theatre
System
Operating Instructions
DAV-DZ860W
©2008 Sony Corporation
ملخص المحتوى في الصفحة رقم 2
disposed of correctly, you will help prevent potential negative consequences for the environment and human WARNING health, which could otherwise be caused by inappropriate waste handling of this product. The To reduce the risk of fire or electric recycling of materials will help to conserve natural shock, do not expose this apparatus to resources. For more detailed information about rain or moisture. recycling of this product, please contact your local Civic Office, your household waste
ملخص المحتوى في الصفحة رقم 3
Precautions About This Operating On power sources � AC power cord (mains lead) must be changed only at Instructions the qualified service shop. � The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall � The instructions in this Operating Instructions outlet (mains), even if the unit itself has been turned describe the controls on the remote. You can off. also use the controls on the unit if they have the � Install this system so that the AC pow
ملخص المحتوى في الصفحة رقم 4
Table of Contents About This Operating Instructions..........3 Control for HDMI/External About the S-AIR function.......................3 Audio Device Playable Discs.........................................5 Using the Control for HDMI Function for Getting Started “BRAVIA” Sync............................ 68 Playing Back Audio Files/JPEG Image Step 1: Assembling Files of a USB Device.................... 71 the Speakers............................11 Storing Songs in a USB Device............ 77
ملخص المحتوى في الصفحة رقم 5
Playable Discs Type Disc logo Characteristics Icon DVD VIDEO � DVD VIDEO � DVD-R/DVD-RW in DVD VIDEO format or video mode � DVD+R/DVD+RW in DVD VIDEO format VR (Video � DVD-R/DVD-RW in VR (Video Recording) mode Recording) mode (except for DVD-R DL) Super Audio CD � Super Audio CD VIDEO CD � VIDEO CD (Ver. 1.1 and 2.0 discs) � Super VCD � CD-R/CD-RW/CD-ROM in video CD format or Super VCD format CD � Audio CD � CD-R/CD-RW in audio CD format DATA CD – � CD-R/CD-RW/CD-ROM in DATA C
ملخص المحتوى في الصفحة رقم 6
2) JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera File system”: Image standards for digital cameras regulated by Japan Electronics and Information Technology Industries Association (JEITA).) ® 3) DivX is a video file compression technology, developed by DivX, Inc. 4) DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. 5) A logical format of files and folders on CD-ROMs, defined by ISO (International Orga
ملخص المحتوى في الصفحة رقم 7
About Multi Session CD � This system can play a Multi Session CD when an MP3 file is contained in the first session. Any subsequent MP3 files recorded in later sessions can also be played back. � This system can play a Multi Session CD when a JPEG image file is contained in the first session. Any subsequent JPEG image files recorded in later sessions can also be played back. � If MP3 files and JPEG image files in music CD format or video CD format are recorded in the first session, only the
ملخص المحتوى في الصفحة رقم 8
Getting Started Unpacking � Front speakers (2) and � Speaker cords (6, red/white/ � Post covers (4) surround speakers (2) green/gray/blue/purple) � Screws (large, with washer) (8) � Remote commander (remote) (1) � Screws (small) (12) � R6 (size AA) batteries (2) � Surround amplifier (1) � Center speaker (1) � Calibration mic (1) � Subwoofer (1) � Speaker cord cover (1) � Foot pads (1 set) �Posts (4) � Speaker cord holder (1) � AM loop antenna (aerial) (1) � Bases (4) � Wireless transceivers (2)
ملخص المحتوى في الصفحة رقم 9
Getting Started Attaching the foot pads to the subwoofer Attach the foot pads (supplied) to the bottom of the subwoofer to stabilize the subwoofer and prevent it from slipping. , Remove the foot pads from the mount seat. Using the remote Inserting batteries into the remote Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment. Note � Do not leave the remote in an extremely hot or humid place. � Do not use a new batte
ملخص المحتوى في الصفحة رقم 10
TV Note � Do not expose the remote sensor to direct sunlight or lighting apparatus. Doing so may cause a malfunction. GB 10 Getting Started
ملخص المحتوى في الصفحة رقم 11
Getting Started Step 1: Assembling the Speakers Before connecting the speakers, attach the speaker stand to the speaker. (For the front and surround speakers) Use the parts as follows: � Front and surround speakers (4) � Speaker cords (4, red/white/blue/gray) �Posts (4) � Bases (4) � Mounting plates (4) � Post covers (4) � Screws (large, with washer) (8) � Screws (small) (12) Although the rear layout of the front speaker is slightly different from it of the surround speaker, the way of the asse
ملخص المحتوى في الصفحة رقم 12
Post Bottom of the base Two holes , Speaker cord Top of the base 2 Attach the post cover to the other end of the post. Orient the slot toward you, attach the post cover so that the slot of the post engages with the tab of the post cover, then secure with the screw. Thread the speaker cord through the hole of the post cover. Speaker cord , , Hole Post cover Upper part of the post Screw (small) GB 12 Getting Started
ملخص المحتوى في الصفحة رقم 13
Getting Started 3 Lay the post in the slot of the speaker, slide the post to the end of the slot, then secure the post with the mounting plate and screws. Select the speaker whose jack color on its rear panel matches the color tube of the speaker cord. Post cover Be careful the orientation of the post cover when placing the post. Secure two screws (large, with washer). , Rear of the speaker Mounting plate 4 Connect the speaker cords to the speaker. Be sure to match the speaker cords to the
ملخص المحتوى في الصفحة رقم 14
5 Attach the post to the base. Insert the post so that the slit on the lower part of the post aligns with the projection of the base, then secure the post with the two screws. Post Slit , Projection Base Screws (small) Note � Make sure that the slot on the post aligns with the projection of the base by rotating the post slightly. 6 Adjust the height of the speaker. Loosen (but do not remove) the screws, adjust the height of the speaker, then secure the screws. Adjust the speaker of one side,
ملخص المحتوى في الصفحة رقم 15
Getting Started 7 Take up any speaker cord slack. Take up slack in the speaker cord by pulling from the bottom of the base. Secure the speaker cord by running it through the slot. Adjust the length of the cord. Fully-assembled illustration Front speaker (L): Front speaker (R): Surround speaker (L): Surround speaker (R): White label Red label Blue label Gray label White Red Blue Gray GB 15
ملخص المحتوى في الصفحة رقم 16
Step 2: Positioning the System For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A). Place the system as illustrated below. A Front speaker (L (left)) B Front speaker (R (right)) C Center speaker B D Surround speaker (L (left)) E Surround speaker (R (right)) F Subwoofer G Unit A H Surround amplifier F C E G A A A A H A D Note � Do not set the speakers in an inclined position. � Do not place the spea
ملخص المحتوى في الصفحة رقم 17
Getting Started To install the speakers on a wall Before installing the speakers on a wall, connect the speaker cord to the speaker. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Color tube Front speaker (L): White Front speaker (R): Red Center speaker: Green Surround speaker (L): Blue Surround speaker (R): Gray 1 Prepare screws (not supplied) that are suitable for the
ملخص المحتوى في الصفحة رقم 18
Note � Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. � Contact a screw shop or installer regarding the wall material or screws to be used. � Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natu
ملخص المحتوى في الصفحة رقم 19
Getting Started Step 3: Connecting the System See the connection diagram below, and read the additional information from 1 to 6 on the following pages. Note � Be sure to make connections securely to avoid hum and noise. � When you connect another component with a volume control, turn up the volume of the other components to a level where sound is not distorted. 3 DIGITAL MEDIA 3 Portable audio source PORT adapter 3 VCR, digital satellite receiver, or PlayStation, etc. 2 TV 4 AM loop antenna
ملخص المحتوى في الصفحة رقم 20
SPEAKER L R 1 Connecting the Speakers The connector and color tube of the speaker cords are the same color as the label of the jacks to be connected. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord insulation in the speaker terminals. Rear of speaker Color tube (+) (–) Connector When connecting to the unit, insert the connector until it cl
