ملخص المحتوى في الصفحة رقم 1
User manual
Dishwasher
ZDT 201
ملخص المحتوى في الصفحة رقم 2
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance. Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ 15 Control panel _ _ _ _ _ _ _ _ _
ملخص المحتوى في الصفحة رقم 3
Safety information In the interest of your safety and to ensure the ried out by inexperienced persons will cause correct use, before installing and first using the injury or serious malfunctioning. Contact appliance, read this user manual carefully, in- your local Service Force Centre. Always in- cluding its hints and warnings. To avoid sist on genuine spare parts. unnecessary mistakes and accidents, it is im- portant to ensure that all people using the General safety appliance are thoroughly fa
ملخص المحتوى في الصفحة رقم 4
or if the control panel, work top or plinth area Installation are damaged such that the inside of the ap- • Check your dishwasher for any transport pliance is freely accessible. Contact your damage. Never connect a damaged ma- local Service Force centre, in order to avoid chine. If your dishwasher is damaged con- hazard. tact your supplier. • All sides of the dishwasher must never be • All packaging must be removed before use. drilled to prevent damage to hydraulic and • Any electrical and plumb
ملخص المحتوى في الصفحة رقم 5
the appliance MUST be in setting mode. Setting mode If a programme light is illuminated and End of The appliance is in setting mode when all programme light is illuminated with fixed light, programme lights are off and End of pro- the last performed programme is still set. gramme light flashes. In this case the programme has to be cancelled: 1. Press and hold the Programme selection/ IMPORTANT! Cancel button until the light of the running Always remember that when performing opera- programme tur
ملخص المحتوى في الصفحة رقم 6
Programme selection/cancel button • Starting the washing programme: 1. Press the On-Off button. 2. Press the Programme selection/cancel button once, the light of the last performed washing pro- gramme illuminates and the End of programme light flashes. 3. Press the Programme selection/cancel button as many times as necessary to illuminate the light corresponding to the desired programme. 4. Close the dishwasher’s door, the programme will start automatically. IMPORTANT! Once the programme has st
ملخص المحتوى في الصفحة رقم 7
Indicator lights Salt Illuminates when the special salt has run out. Is never illuminated while a washing programme is running. Audible signals Audible signals have been introduced to help 4. After a few seconds: indicate which operations the dishwasher is – programme light A turns off performing. – programme light B goes on flashing – end of the washing programme, – End of programme light illuminates – malfunction of the appliance with fixed light, indicating that the audi- Factory setting: aud
ملخص المحتوى في الصفحة رقم 8
Washing programmes Programme Degree of soil Type of load Programme description Intensive 70° Heavy soil Crockery, cutlery, pots Prewash and pans Main wash 2 intermediate rinses Final rinse Drying Normal 65° Normal soil Crockery, cutlery, pots Prewash and pans Main wash 2 intermediate rinses Final rinse Drying 30 min Light soil Crockery and cutlery Main wash 1) Final rinse Bio 50° Normal soil Crockery and cutlery Prewash 2) Main wash 1 intermediate rinse Final rinse Drying Rinse and Hold Any. 1 c
ملخص المحتوى في الصفحة رقم 9
– Set the water hardness to level 1. When using tablets that IMPORTANT! integrate rinse aid and If the drying results are not satisfactory we rec- detergent: ommend that you: there is no need to fill up with rinse aid 1. Fill up the rinse aid dispenser with rinse aid. – set the water softener 2. Set the rinse aid dosage to position 2. – add special (dishwasher) salt If you decide in future to use separated deter- gents, we advise that you: When using tablets that – Fill up the salt and rinse aid
ملخص المحتوى في الصفحة رقم 10
Water hardness Adjusting the water hardness Use of salt setting Clarke °TH mmol/l manually electronically 46 - 52 65 - 75 6,5 - 7,5 2 level 8 yes 36 - 45 51 - 64 5,1 - 6,4 2 level 7 yes 28 - 35 40 - 50 4,0 - 5,0 2 level 6 yes 23 - 27 33 - 39 3,3 - 3,9 2 level 5 yes 18 - 22 26 - 32 2,6 - 3,2 1 level 4 yes 13 - 17 19 - 25 1,9 - 2,5 1 level 3 yes 5 - 12 7 - 18 0,7 - 1,8 1 level 2 yes < 5 < 7 < 0,7 1 level 1 no The water softener must be set in both ways: manually, using the water hardness dial and
ملخص المحتوى في الصفحة رقم 11
4. To change the level, press the Programme 5. To memorise the operation, switch off the selection/Cancel button. Each time the dishwasher. button is pressed the level increases (level 1 follows level 10). The End of pro- gramme light indicates the new setting. Filling with dishwasher salt CAUTION! Use only special salt suitable for dishwashers. Unscrew the cap. Only before filling with Using the funnel provided, salt for the first time, fill pour in the salt until the the salt container with
ملخص المحتوى في الصفحة رقم 12
Filling with rinse aid Open the lid. Fill up with rinse aid. The Clean up any rinse aid maximum level for filling is which overflows. Close indicated by "max" the lid and press until it locks. IMPORTANT! CAUTION! Top up the rinse aid when the light on the control panel Never fill the rinse aid dispenser with any other sub- illuminates. stances (e.g. dishwasher cleaning agent, liquid deter- gent). This would damage the appliance. Adjusting the dosage of rinse aid Increase the dose if there are dr
ملخص المحتوى في الصفحة رقم 13
Loading cutlery and dishes – Dishes and items of cutlery must not lie Sponges, household cloths and any object that inside one another, or cover each other. can absorb water may not be washed in the – To avoid damage to glasses, they must dishwasher. not touch. • Before loading the dishes, you should: – Lay small objects in the cutlery basket. – Remove all left over food and debris. • Plastic items and pans with non stick coat- – Soften remnants of burnt food in pans ings have a tendency to reta
ملخص المحتوى في الصفحة رقم 14
Load cutlery. For best re- Place knives and other Load the lower basket. Ar- sults we recommend you items of cutlery with sharp range serving dishes and to use the cutlery grid pro- points or edges with their large lids around the edge vided (if the size and di- handles facing upwards. of the basket. mensions of the cutlery Risk of injury! allow it) Load upper basket. Light For taller items, the cup If plates are to be loaded in the upper basket: load items (plastic bowls etc.) racks can be fold
ملخص المحتوى في الصفحة رقم 15
IMPORTANT! When the basket is in the higher position you will not be able to use the cup racks. Move the front runner Refit the basket in the stops (A) of the upper bas- higher position and re- ket outwards and slide the place the stops (A) in their basket out. original position. Use of detergent IMPORTANT! Observe the manufacturer’s dosing and stor- age recommendations. Only use detergents suitable for dishwashers. Open the lid. Fill in the detergent in Observe the dosing lev- compartment A. el
ملخص المحتوى في الصفحة رقم 16
For programmes with pre- When using detergent Close the lid. wash add an additional tablets: place detergent detergent dose in com- tablets in compartment A. partmentB. cleaning power during short washing pro- Detergent tablets grammes. Therefore, please use long washing Detergent tablets from different manufacturers programmes when using detergent tablets, to dissolve at different rates. For this reason, ensure the complete removal of detergent some detergent tablets do not attain their full
ملخص المحتوى في الصفحة رقم 17
Clean filters A, B and C Turn the handle about 1/4 Remove filter A from the thoroughly under running turn anticlockwise and re- base of the washing com- water. move filters B and C. partment. Put the flat filter A back in Replace the filters and the base of the washing lock by turning the handle compartment and ensure clockwise to the stop. that it fits perfectly under the two guidesD. Cleaning the spray arms Internal cleaning Ensure that the seals around the door, the de- NEVER try to remove
ملخص المحتوى في الصفحة رقم 18
2. Leave the door ajar to prevent the forma- 1. Unplug it. tion of any unpleasant smells. 2. Turn the water tap off. 3. Leave the inside of the machine clean. 3. Remove the water inlet and discharge ho- ses. Frost precautions 4. Pull the machine out together with the ho- ses. Avoid placing the machine in a location where Avoid over tilting the machine during transpor- the temperature is below 0°C. If this is tation. unavoidable, empty the machine, close the ap- pliance door, disconnect the water
ملخص المحتوى في الصفحة رقم 19
Something not working The dishwasher will not start or stops during solved with the help of the indications described operation. in the chart, without calling out an engineer. Certain problems are due to the lack of simple Switch off the dishwasher and carry out the fol- maintenance or oversights, which can be lowing suggested corrective actions. Fault code and malfunction Possible cause and solution • continuous flashing of the start/cancel indicator • The water tap is blocked or furred with li
ملخص المحتوى في الصفحة رقم 20
For other fault codes not described in the above and serial number (S.N.). This information can chart, please contact your Service Force Cen- be found on the rating plate located on the side tre. of the dishwasher door.. So that you always Contact your local Service Force Centre, quot- have these numbers at hand, we recommend ing the model (Mod.), product number (PNC) you to make a note of them here: Mod. :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PNC : . . . . . . . . . . . .
