ملخص المحتوى في الصفحة رقم 1
D00631501B
CD-RW402
CD Recorder / Duplicator
Professional
OWNER’S MANUAL
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
Ü
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
ÿ
that may be of sufficient magnitude to constitute a risk of electric sho
ملخص المحتوى في الصفحة رقم 2
Important Safety Precautions For U.S.A IMPORTANT (for U.K. Customers) TO THE USER DO NOT cut off the mains plug from this equipment. This equipment has been tested and found to If the plug fitted is not suitable for the power points in your home or comply with the limits for a Class A digital device, the cable is too short to reach a power point, then obtain an pursuant to Part 15 of the FCC Rules. These appropriate safety approved extension lead or consult your dealer. limits are designed to p
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION: "Note to CATV system installer: …Read all of these Instructions. This reminder is provided to call the CATV system installer’s attention to …Save these Instructions for later use. Section 820-40 of the NEC which provides guidelines for proper grounding …Follow all Warnings and Instructions marked on the audio and, in particular, specifies that the cable ground shall be connected to the equipment. grounding system of the building, as close to the point of ca
ملخص المحتوى في الصفحة رقم 4
SAFETY INFORMATION This product has been designed and manufactured according to FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968", and is classified as a class 1 laser product. There is no hazardous invisi- ble laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the protective housings. The label required in this regulation is shown in 1. CAUTION - DO N
ملخص المحتوى في الصفحة رقم 5
Table of Contents Using the main unit ................................... 23 1 – Introduction Using the remote control unit .................. 23 Supplied accessories ................................................7 Using the jog function ...............................23 Some notes and precautions .......................7 Changing the preview portion length ................ 23 Rack-mounting the unit ..........................................8 Playback modes ....................................
ملخص المحتوى في الصفحة رقم 6
Table of Contents Disc copying ................................................45 6 – After recording Program copy .............................................46 Finalizing .................................................... 40 DAO copying ..............................................46 Unfinalizing CD-RW discs .....................................40 Disc compare ..........................................................47 Erasing ........................................................ 40 A
ملخص المحتوى في الصفحة رقم 7
1 – Introduction The CD-RW402 is a sophisticated twin-deck CD Pitch control allows time stretching and compression recording and duplication system. It features state-of- Full index capability for recording the-art rewritable compact disc technology to allow TOC editing allows the production of “virtual discs” recording and playback of audio material on compact for copying disc media. A recording buffer ensures that even the first milli- Operating is by means of the front panel, featuring an
ملخص المحتوى في الصفحة رقم 8
1 – Introduction—Some notes and precautions Rack-mounting the unit Use the rack-mounting kit to mount the unit in a stan- See “Environmental considerations” on page 8 below dard 19-inch equipment rack, as shown below. for details of ventilation, etc. Remove the feet of the unit before mounting it. Environmental considerations The CD-RW402 may be used in most areas, but to Make sure that the unit is mounted in a level position maintain top performance, and prolong operating for correct operatio
ملخص المحتوى في الصفحة رقم 9
1 – Introduction—Some notes and precautions disc, additional material can be recorded. The pack- for other recordings. The packaging of CD-RW discs aging of CD-R discs will include one of the follow- will include one of the following logos: ing logos: However, you should note that an audio CD created By contrast, a CD-RW disc can be used in much the using a CD-RW disc may not play back satisfactorily same way as a CD-R disc, but the last track or tracks on every audio CD player. It will, na
ملخص المحتوى في الصفحة رقم 10
1 – Introduction—Finalizing Additional notes with regard to CD-R and CD-RW discs There are additional precautions that you should take Always store CD-R discs in their “jewel cases” to when handling CD-R and CD-RW discs, that are dif- avoid dirt and dust accumulating on their surfaces. ferent to those that you should take when handling Do not put labels or protective sheets on the discs ordinary CDs. and do not use any protective coating spray. When labeling CD-R discs, always use a sof
ملخص المحتوى في الصفحة رقم 11
1 – Introduction—About this manual About this manual In this manual, we use the following conventions: 4, “Playback operations” Using the CD- RW402 as an ordinary CD player is straightforward, The names of keys and controls are given in the but there are many useful playback features in this following typeface: ERASE. unit which repay careful study. When the alphanumeric portion of the display shows a message, this is shown in the following 5, “Recording” The different options available
ملخص المحتوى في الصفحة رقم 12
2 – Using the menu system The CD-RW402 menu system is easy to use, and the 4 Turn the MULTI DIAL until the menu item you different operations that can be performed all use the want is displayed. same method of working. This general guide to the 5 Push the MULTI DIAL. way in which the menu system works on the unit will The menu item and the current parameter help you set up and use your CD-RW402 to maxi- are shown on the display. mum advantage. There are two MENU keys, and two MULTI DIALs. 6
ملخص المحتوى في الصفحة رقم 13
2 – Using the menu system—Menus and items a. Drive 2 only b. Individual settings for each drive c. Drive 1 only MENU key 1 only Menu Menu item Description Parameter Default TOC EDIT DIVIDE Splits a track into two COMBINE Combines two tracks into one START Pt SET Sets the start point for track operations END Pt SET Sets the end point for track operations ERASE TRACK Removes the track from the virtual TOC ALL CANCEL Restores the true “physical” TOC MENU key 2 only Menu Menu item Description Param
ملخص المحتوى في الصفحة رقم 14
2 – Using the menu system—SYSTEM menu features SYSTEM menu features These features determine the settings for either the whole system, or for the individual drive on which the settings are made. Dimmer settings Individual settings for each drive. 3 Turn the MULTI DIAL until DIMMER ? appears in the display. Push the MULTI DIAL. The illumination level of the displays can be set using this menu option. Adjust this to suit the ambi- 4 Turn the MULTI DIAL to set the value to ent lighting levels,
ملخص المحتوى في الصفحة رقم 15
2 – Using the menu system—SYSTEM menu features Index display Only available from drive 1 and only applies to drive 1 Press MENU key 1. 1. 2 Turn the MULTI DIAL until SYSTEM MENU? The index marks in the CD subcode can be hidden or appears in the display. Push the MULTI DIAL. displayed. 3 Turn the MULTI DIAL until INDEXDISP? When index marks are not displayed, the time dis- appears in the display. Push the MULTI DIAL. play will look something like: 4 Turn the MULTI DIAL to set the value to 1Tr
ملخص المحتوى في الصفحة رقم 16
3 – Features and controls Front panel 1 POWER switch Use this to turn the unit on 9 CALL key (1) This key moves playback and off. position to the last playback start position. See “Cue point” on page 22. 2 Drive 1 display Shows track and playback information, etc. for drive 1, as well as the menu A DISPLAY key (1) Changes the time display parameters and settings. type of drive 1. 3 Disc tray (1) Holds the disc for drive 1. B DISC COPY key Starts the copying process of discs from 1 to 2. 4 M
ملخص المحتوى في الصفحة رقم 17
3 – Features and controls—Front panel J STOP key (1) Stops playback on drive 1. Y INPUT control This control adjusts the level of an analog signal sent to the drive. K PLAY key (1) Starts playback on drive 1. Z JOG key and indicator (2) Press to light L READY key (1) Pauses playback on drive 1. the indicator. When it is lit, this allows the playback M CONT PLAY key and indicator When position of the disc in drive 2 to be adjusted (see lit, allows continuous playback between drives 1 and “U
ملخص المحتوى في الصفحة رقم 18
3 – Features and controls—Rear panel features Rear panel features kl mn opqr s t u vw x Digital connections These connections all han- p UNBALANCED OUTPUT (2) These dle digital audio I/O. unbalanced RCA connectors output the signal from drive 2 at –10 dBV nominal levels (red=right). k COAXIAL INPUT and OUTPUT q UNBALANCED COMMON OUT These (DRIVE 2) These RCA connectors accept and connectors are used in the same way as the transmit digital audio data to and from drive 2 COMMON setting for
ملخص المحتوى في الصفحة رقم 19
3 – Features and controls—Rear panel features drives. See the Specifications section for details of x Power inlet (~ IN) Use an AC power cord pinouts, etc. appropriate for your area to connect the CD-RW402 to the power supply. w REMOTE IN Use this to connect the RC- RW402 remote control unit. NOTE The equipment draws nominal non-operating power NOTE from the AC outlet with its POWER switch in the off Never attempt to attach any other remote control position. device other than the RC-RW402,
ملخص المحتوى في الصفحة رقم 20
3 – Features and controls—Rear panel features C LOC B key Equivalent to the LOC B key on M ERASE key Equivalent to the ERASE key on the main unit is8 the main unit R. D CALL key Equivalent to the CALL (1) key on N FINALIZE key Equivalent to the FINALIZE the main unit 9. key on the main unit Q. E Track skip keys These keys are used for O JOG key Equivalent to the JOG (2) key Z. track skip and for changing jog position, etc. The indicator lights on the main unit when jog mode is entered from t
