Xantech DPC100 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION INSTRUCTIONS

DPC100
Doorbell / Paging Controller

DESCRIPTION
The DPC100 is a Doorbell / Paging Controller that can be combined with a MRC88CTL to provide
whole-house paging and doorbell capability. Adding the Doorbell Communicator (DCSS or DCBB)
and Doorbell Communicator Hub (DCH4) with the MRC88CTL system creates a complete entry
control and paging solution. The DPC100 can also provide “Music on hold” for an existing phone line.

SPECIFICATIONS
Power: 120VAC/13

ملخص المحتوى في الصفحة رقم 2

1. Power supply connection. Be sure to use the included power supply only. 2. Doorbell Switch Input (lighted or non-lighted). Provides door chime over speakers (not polarity sensitive). This input can also be connected to a DCH4 for a unique front / back door chimes. 3. C.O. / Phone Line Input. 4. Line Out to Phones. 5. Page Trigger Output. Connect to the MRC88CTL requiring 12VDC signal (or dry relay contact closure) for enabling the paging source input. 6. Music on Hold Input. (

ملخص المحتوى في الصفحة رقم 3

APPLICATION 08905106B - 3 -

ملخص المحتوى في الصفحة رقم 4

OPERATION A. Paging To page throughout the house/small business, simply press #, then 7 (the letter “P” key on your keypad). Speak into the phone receiver and your voice will be heard throughout the house or small business over the speakers. If background music is present over the speakers, it will automatically mute allowing your page to be heard. If you have a caller on the phone, they will automatically be put on hold. You can get the caller back by simply pressing #8 or by momentar

ملخص المحتوى في الصفحة رقم 5

I. Door Chime (Doorbell Switch Input) With DIP switch 2 in the OFF position (see DIP Switch Programming, page 2), the doorbell input terminals on the DPC100 can be connected to a normally open switch (lighted or non-lighted doorbell buttons, etc.). When the switch is activated, the unit will momentarily mute the background music and provide a door chime (ding-dong) sound over the speakers. Note: This input is not polarity sensitive and is designed to light standard 6-16V lighted doorbel

ملخص المحتوى في الصفحة رقم 6

FCC REQUIREMENTS This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the side of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive REN's on a telephone line may result in the devices not ringing in respo