ملخص المحتوى في الصفحة رقم 1
Digital Access Keypad Manual
User Operation for the SK-1123-SQ
®
1. Using the User Codes:
u u u u
Note: indicates
A. User codes operate the door (4-8 digits long).
the user code.
u u u u
Press
X X X X
Note: indicates
B. The key must be pressed also if the keyp # ad is in manual-entry mode.
the master code.
u u u u #
Press
2. Using the Master Code:
The Master Code can be used to operate the door or program the keypad (4-8 digits long, see pt. 5 belo
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS REPROGRAM THE KEYPAD (CERTAIN DATA) To change certain data in the keypad (such as to delete or change user codes), do the following: Introduction ................................................................................................................ 2 1. Enter program mode by keying in the master code and the key: Dimensions ................................................................................................................ 2 * X X X X The keypad
ملخص المحتوى في الصفحة رقم 3
Digital Access Keypad Manual Digital Access Keypad Manual INSTALLER PROGRAMMING UNIQUE FEATURES These functions should only be used by professional installers, as incorrect entries can disable the entire keypad function. Enter Programming Mode 0 0 0 0 (DEFAULT: ) • 12-24V AC/DC universal power -- No programming or jumpers needed. Enter Master code Confirm Function * � Mantrap -- Each keypad can be used as a stand-alone keypad. However, the mantrap X X X X Enter into programming m
ملخص المحتوى في الصفحة رقم 4
Digital Access Keypad Manual Digital Access Keypad Manual PREPARING TO PROGRAM THE KEYPAD WIRING, BASIC DIAGRAM To program the SK-1123-SQ, first determine the following information: 1. The master code -- Allows the system administrator to program or operate the keypad. 2. The user code or codes -- Allows users to use the keypad's functions. 3. Configuration of the relays and outputs -- For relay output #1 and relay output #2, determine whether the output should operate from 1 to 999 seconds and
ملخص المحتوى في الصفحة رقم 5
Digital Access Keypad Manual Digital Access Keypad Manual PROGRAMMING NOTES SPECIFICATIONS 1. Master Code: The SK-1123-SQ comes pre-programmed with the Master Code set at 0000. Additional codes and/or Power: data should be programmed at the owner's discretion. However, to ensure security, program a new personal Master � Operation voltage -- 12-24 Volts AC/DC. No jumper needed to set voltage. Code to replace the factory-set Master Code as soon as possible. � Stand-by current drain -- 15mA @12VDC.
ملخص المحتوى في الصفحة رقم 6
Digital Access Keypad Manual Digital Access Keypad Manual WIRING: WIRING: Example Wiring, with Inhibit Control Authorized Auxiliary Accessories TAMPER N.C. CONNECTIONING INHIBIT AUTHORIZATION CONTROL Tamper ALARM N.C. CONTROL PANEL WARNING 24-hour N.C. • For safety, ensure that no protection zone one is inside the premises before starting the door lock inhibit function. DURESS OUTPUT During inhibit, doors Duress (-) remain locked. ALARM Output Ground CONTROL PANEL 24-hour N.O. protection zone,
ملخص المحتوى في الصفحة رقم 7
Digital Access Keypad Manual Digital Access Keypad Manual WIRING: WIRING: Example Wiring, 2 Keypads with Mantrap Example Wiring, with Connection to Lock Device and Alarm Arm/Disarm DOOR #1 DOOR #2 REMARKS Output relay #1 N.O. output for fail-secure lock N.C. output for fail-safe lock Cross wire connection for interlock functions Common ground ALARM CONTROL PANEL N.O. Duress -- To 24-hour N.O. zone (--) Com gnd (--) of keypad & alarm system (+) (--) Output #1 Output
ملخص المحتوى في الصفحة رقم 8
Page 8 Page 9 SK-1123-SQ - User Control Chart Relay Output #1:Output: Shunt / Momentary (____secs.) Programmed For__________________________________ USER ID User Name Access Code USER ID User Name Access Code 00 SAMPLE - John Doe 54321 00 SAMPLE - John Doe 54321 00 50 01 51 02 52 03 53 04 54 05 55 06 56 07 57 08 58 09 59 10 60 11 61 12 62 13 63 14 64 15 65 16 66 17 67 18 68 19 69 20 70 21 71 22 72 23 73 24 74 25 75 26 76 27 77 28 78 29 79 30 80 31 81 32 82 33 83 34 84 35 85 36 86 37 87 38 88 39