ملخص المحتوى في الصفحة رقم 1
LCD Keypad Module
DGP2-641
System Manager’s Manual
for DGP-848 Systems
Also includes
Operating Instructions
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
TABLE OF CONTENTS INTRODUCTION ........................................................... 4 Delayed Fire Zone ............................................................ 17 Legend ............................................................................... 4 Fire Safety Tips................................................................. 18 Minimizing Home Fire Hazards......................................... 18 Home Fire Warning System.............................................. 18 BASI
ملخص المحتوى في الصفحة رقم 4
1.0 INTRODUCTION Your Digiplex Security System is an advanced technology security system that will provide you with reliable security protection and powerful features that are easy to use. The elegant and user-friendly LCD keypad will allow you easy access to your security system's functions and information at the touch of a button. The 32-character LCD screen will display messages and menus to guide you through the system’s operations. Your Installer can even customize the messages for your
ملخص المحتوى في الصفحة رقم 5
2.2 CONFIDENTIAL MODE Your Installer can program keypads to not display the status of your system automatically by changing the LCD screen to Confidential Mode. In Confidential Mode: • The zones and status messages will NOT be displayed • The indicator lights will NOT illuminate • Depending on how your keypad was programmed by your installer, you must either press a button or enter your User Access Code to illuminate the indicator lights and activate Normal Mode. 2.3 PARTITIONED SYSTEM A sepa
ملخص المحتوى في الصفحة رقم 6
3.3 STAY ARMING Stay arming will partially arm your system to permit you to remain in your home or office by arming the outer zones (perimeter) of the protected area (i.e. doors and windows). 1. Enter your [ACCESS CODE]. 2. Press the [STAY] button. 3. If you have access to more than one area, select the area(s) you wish to Stay arm (refer to section 2.3 on page 5). 3.4 INSTANT ARMING This feature is the same as Stay arming except that there is no Entry Delay. Therefore, any armed zone that is
ملخص المحتوى في الصفحة رقم 7
3.7 ONE-TOUCH BUTTONS If enabled by your Installer, you can access the following features without using your User Access Code by pressing and holding the desired One-Touch button. BUTTON FEATURE BUTTON FEATURE [ARM] Regular arm [DISARM] Disarm a Stay/Instant armed area [STAY] Stay arm [5] Instant arm [FORCE] Force arm [6] Change display settings [BYP] Bypass Programming [7] View Event Record display 3.8 KEYSWITCH ARMING A key can be used to arm and disarm your system using two forms of keyswitc
ملخص المحتوى في الصفحة رقم 8
To Disarm a system in alarm: 1. Enter your [ACCESS CODE]. 2. In the case of a false alarm, call your Central Monitoring Station quickly to advise them of the false alarm. In the case of a burglar alarm, leave the premises and call the Police from a safe place. 4.3 ALARM MEMORY DISPLAY Your system will record all the alarms that occurred during the last armed period. The zones in alarm will remain in the Alarm Memory until the next time that area is armed. When an alarm has occurred, the LCD s
ملخص المحتوى في الصفحة رقم 9
Figure 5.1: Programming User Access Codes Enter your [ACCESS CODE] (System Master Code or User Access Code with Master feature). Press [0] to enter the Programming Menu. From Programming Menu, press [ACC]. Enter the 2-digit User Number you want to program; press the [ ] button to scroll the list of codes then press [ACC] once the desired code appears on the screen. Enter a User Code within the brackets. Press the [ ] button to reach the User Options screen. NOTE: The User Code is a Persona
ملخص المحتوى في الصفحة رقم 10
Users are able to perform actions (arming, disarming, etc.) only in the area(s) they are assigned. To assign an area(s) to a User Access Code, enter the number corresponding to the area you wish to assign (i.e. [1] = area 1, ...[4] = area 4). Press the [ ] button to return to the User Options; press the [ ] button to proceed to ENTER] button to save and exit programming mode. step 8; or press the [ NOTE: If no area is assigned, and if PGMs are programmed by your Installer, the User can on
ملخص المحتوى في الصفحة رقم 11
5.4 USER OPTIONS Options [1] and [2]: Master Feature When option [1] is OFF, the User cannot program other Users into the system. When option [1] is ON and option [2] is OFF, the User can only modify existing User Access Codes. When both options [1] and [2] are ON, the User has Full Master rights. The User can create or modify User Access Codes, User Options, User Access Control Options, Access Card Numbers and Area Assignments according to their own programming. For example, if the Full Maste
ملخص المحتوى في الصفحة رقم 12
Option [8]: Access to Armed Access Control Doors When option [8] is enabled, the Access Control Card can be used to open an armed Access Control Door. When a valid Access Control Card is presented to a reader that is assigned to a zone and the zone is armed, access will be granted and the Entry Delay will begin. When option [8] is ON, extra security is provided since a user must enter a User Access Code to disarm the area. For option [8] to function in the ON position, option [5] “Arm Only”
ملخص المحتوى في الصفحة رقم 13
6.3 HOW ACCESS CONTROL WORKS To illustrate how Access Control functions, we will use three simple Access Control System examples: Figure 6.1: Example A Bonnie’s Access Control Card is programmed with Access Level 01 and Schedule 01. If she presents her card to the reader on Door 02 on Tuesday, August 3 at 3 p.m., she will gain access to the room. Figure 6.2: Example B If Bonnie presents her card to the reader on Door 02 on Saturday or on a Holiday at 3 p.m., she will be denied access. Figure
ملخص المحتوى في الصفحة رقم 14
7.0 TROUBLE DISPLAY If your system experiences any problems, “Trouble(s) [TRBL] to View” will appear on the LCD screen. The Trouble Display will only display the troubles that occur in the area(s) to which the keypad has been assigned. Potential troubles have been sorted into eight groups. Only the troubles which are relevant to you are listed and described below. If a trouble that is not described or listed below appears, contact your Installer. To View the Trouble Display: 1. Press the [TRB
ملخص المحتوى في الصفحة رقم 15
8.0 ADDITIONAL FEATURES 8.1 PROGRAMMABLE OUTPUTS (PGMS) Your system includes Programmable Outputs (PGMs) that can be programmed by your Installer. A PGM triggers when a predetermined event or series of events occurs in your system. The PGMs can be programmed to reset smoke alarms, turn on light switches, open or close garage doors and much more. Ask your Installer about this useful feature. 8.2 KEYPAD SETTINGS You can modify the keypad settings to suit your needs (Refer to Figure 8.1 on page
ملخص المحتوى في الصفحة رقم 16
3. Press the [1] button to chime a zone. Then enter the number corresponding to the zone to be chimed, or use the [ ] and [ ] buttons to scroll the list of zones. Press the [ACC] button to chime or unchime the zone that appears on the screen. Press [ENTER] to save. OR Press the [2] button to set the time period a chimed zone will beep. Enter the time that the chimed zone(s) will start beeping when opened (HH:MM). Enter the time that the chimed zone(s) will stop beeping when opened (HH:MM
ملخص المحتوى في الصفحة رقم 17
9.4 SYSTEM TEST Speak to your Installer before conducting a System Test since the system must be programmed to respond to the test instructions. It is normally recommended that you conduct the system test once a week, but contact your Installer for instructions concerning your particular system. To conduct a system test: 1. Call your Central Monitoring Station to advise them that you are testing your system. 2. Enter your [ACCESS CODE]. 3. Press the [8] button. The system will test all its con
ملخص المحتوى في الصفحة رقم 18
Figure 10.1: Delayed Fire Zone 10.3 FIRE SAFETY TIPS How should you prepare in case of a fire in your home or business? • Remind everyone to escape first, then call for help. • Develop a fire escape plan and designate a meeting place outside. • Practice the escape plan frequently. • Plan two ways to escape from every room, if possible. • Practice feeling the way out with eyes closed. • Instruct everyone never to stand up during a fire, always crawl under the smoke and keep mouths covered.
ملخص المحتوى في الصفحة رقم 19
Voice-Assisted Arm/Disarm Module Operating Instructions 11.0 INTRODUCTION Congratulations on choosing the Paradox InTouch Voice-Assisted Arm/Disarm Module (APR3-ADM2). InTouch turns any touch-tone telephone into a keypad. With InTouch, you can now arm or disarm your Digiplex security system as well as activate or deactivate your InTouch’s output all from your telephone. Using detailed voice prompts to guide your way, the InTouch is as simple as picking up your telephone. 12.0 ACCESS CODES InT
ملخص المحتوى في الصفحة رقم 20
• Your installer can program the output to deactivate either manually or follow a timer. If programmed to be deactivated manually, the output will remain activated until you deactivate it. If programmed to follow a timer, the output will deactivate after the timer has elapsed. 14.4 WHEN USING YOUR INTOUCH... • In some cases, your telephone’s tone may not be powerful enough to interrupt the InTouch’s voice prompt. If this is the case, simply wait for the InTouch’s voice prompt to finish before
