Gianni Industries GS-200 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

180
164
27
180
164
33
(43)
GS-200 MINI SHEAR LOCK
Dimension
Statement
GEM Mini Shear Lock locks by seating two conical locking
bolts located on opposite corners of the Armature Plate into
matching keep holes on each end of the Electromagnet body.
Unit: mm
The GEM Shear Locks never bind under pressure, are not
sensitive to door alignment, and do not require door position
sensing or auxiliary timing circuitry. They are ideal for swing-
Magnet Armature
Magnet Armature
through doors and sliding door

ملخص المحتوى في الصفحة رقم 2

182 182 48 48 GS-200 MINI SHEAR LOCK Optional Brackets The unit may also be fitted semi-flush or sureface installation with the use of the SMB-200 and UBK-182 Brackets. The magnet should be fitted to the door transom and the housing holding the armature on to the door. It is vital that a minimum gap of 2mm exists between the magnet and the armature, to allow correct operation. SMB-200 Bracket GS-200VGL Semi- Flush Installation Header Magnet Assembly UBK-182 Bracket M6x45 Screw Blind Nut Surface