Rolls MX34c دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PHANTOM POWER
OFF=UP
ON=DOWN
For warranty registration please visit the rolls web site at www.rolls.com.
MX34c LiveMix
HEADSET
MIC
1/8”
c
12 VDC
CHANNEL 1 CHANNEL 2
+
AUX STEREO POWER
INPUTS -
IN OUT
OUTPUT LEVEL
MIC
LINE
MADE IN USA
www.rolls.com
LiveMix
Two Channel Stereo
Microphone Mixer/
MX34c
Headset Mixer
QUICK START
ROLLS CORPORATION
SALT LAKE CITY, UTAH
OPERATION GUIDE
04/10
BATTERIES
9V x 2

ملخص المحتوى في الصفحة رقم 2

INTRODUCTION SPECIFICATIONS Thank you for purchasing the new MX34c LiveMix - two channel microphone mixer. Input Impedance: mic - 600 Ohms or greater XLR Although having many uses, this little mixer was originally designed with the video camera aux - 47K stereo 3.5mm operator in mind. It’s handy shoulder strap, easy-access microphone Level and Pan Output Impedance: 50 Ohms controls, and smart Input/Output jack placement make the MX34c ideal for the live record- THD + Noise: .02% ing

ملخص المحتوى في الصفحة رقم 3

SCHEMATIC DESCRIPTION FRONT PANEL HEADSET MIC 1/8” c MIC1 and MIC2 LEVEL: Adjusts the amount of signal of the indicated Microphone channel. PAN: Adjusts the relative level of signal from the channel to the Right/Left Output. pwr: When lit, indicates that the MX34c is on. A dim light indicates low battery voltage. HEADPHONE LEVEL: Adjusts the amount of signal from the Headphone Output. OUTPUT: 1/8” (3.5mm) jack containing the Headphone Output signal. REAR PANEL OUTPUT LEVEL MIC LINE INPUTS STER

ملخص المحتوى في الصفحة رقم 4

CONNECTION OPERATION Connect microphones to the MX34c via balanced XLR cables. Once your MX34c is properly connected, apply power by pressing in the POWER Stereo auxiliary sources such as the output from another mixer, AM/FM tuners, button on the rear panel. The blue pwr LED on the front panel should light. CD Players, and MP3 players may be connected to the AUX IN via a stereo 1/8” (3.5mm) Tip-Ring-Sleeve plug. If you are using condenser type microphones, apply the phantom power to the Conne