ملخص المحتوى في الصفحة رقم 1
Professional Disc Jockey Products
DM1190 STEREO MIXER
OWNER’S MANUAL
NUMARK INDUSTRIES
11 Helmsman Road, North Kinstown RI 02852 http://www.numark.com
ملخص المحتوى في الصفحة رقم 2
DM1190 Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 2 http://www.numark.com
ملخص المحتوى في الصفحة رقم 3
DM1190 6. Heat - Avoid placing this product too close to CAUTION any high heat sources such as radiators. RISK OF ELECTRIC SHOCK 7. Power Sources - This product should be DO NOT OPEN connected to a power supply only of the type described in these operating instructions, or as CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT marked on the unit. REMOVE ANY COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 8. Power Cord Protection - Power supply
ملخص المحتوى في الصفحة رقم 4
DM1190 NUMARK DM1190 STEREO MIXER INDEX Safety Information Page 3 Product Registration Introduction Page 5 Features Precautions Page 6 Front Panel Diagram Page 7 Rear Panel Diagram Guided Tour of Features Page 8 Operating Instructions Connection Diagram Page 13 Specifications Page 14 Block Diagram Page 15 Warranty and Service Page 16 Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 4 http://www.numark.com
ملخص المحتوى في الصفحة رقم 5
DM1190 CONGRATULATIONS! You have purchased the DM 1190 Stereo Mixer by Numark. This equipment features all new circuitry and the latest in manufacturing and design technology to give you greater quality and better reliability than ever before. The DM 1190 brings to you the finest quality of DJ equipment available today. Thank you for buying Numark DJ products! FEATURES... Mixer features include: • User replaceable assignable ALPs™ crossfader . • Dual
ملخص المحتوى في الصفحة رقم 6
DM 1190 IMPORTANT INFORMATION... Please read this entire manual before SYSTEM PRECAUTIONS connecting the DM1190 to your system. For optimum performance: • Use appropriate cables throughout your system: Quality shielded audio cables and • Always make sure that AC power is OFF terminated shielded video cables, low- while making any connections. capacitance preferred. Speaker cables must be 14-gauge minimum; 12- or 10-gauge is better. • Do not use excessively long cables (i.e. over 50ft/14m) Be su
ملخص المحتوى في الصفحة رقم 7
DM1190 DM1190 FRONT PANEL DIAGRAM... 16 19 7 20 15 17 11 1 13 10 9 12 14 2 8 3 4 5 6 17 DM1190 REAR PANEL DIAGRAM... 6 8 8 8 1 2 7 7 7 7 7 9 9 9 4 5 3 Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 7 http://www.numark.com
ملخص المحتوى في الصفحة رقم 8
DM 1190 GUIDED TOUR OF FEATURES AND OPERATING INSTRUCTIONS... If the DM1190 is your first mixer, please read this entire manual before you begin operation. CROSSFADER SECTION If you are an experienced DJ simply replace your old 4. The Crossfader Assign knob to the left of the mixer. The DM1190 can be rack-mounted or used crossfader lets you choose which input channel will as a free-standing unit (five 19" rack unit spaces). be heard when the crossfader is in the far left position. INSTALLATION
ملخص المحتوى في الصفحة رقم 9
DM1190 DJ MIC SECTION MASTER/BOOTH OUTPUT SECTION The DM1190 has an extremely flexible DJ Mic 12. The Stereo Master Fader controls the overall channel. The Talkover function reduces the level of output level. the music while leaving the DJ Mic at normal volume. 13. Stereo/Mono toggle adjusts the Master 7. Neutrik™ “Combo” connector allows connection output for the operation selected. of either a 1/4” jack or an XLR jack. This is ideal for connecting an XLR gooseneck directly into the mixer. 14
ملخص المحتوى في الصفحة رقم 10
DM 1190 EQUALIZER SECTION GENERAL EQ HINTS 16. 6-Band Stereo Graphic Equalizer (EQ). • Boost the 42Hz band for deep bass tones and solid EQ compensates for differences in source material kick drum sound. Use sparingly because this sound quality. In ultra-compact mobile systems this EQ dramatically increases demand on power amplifiers and can be used to tailor the sound to the acoustical could drive them into “clipping” (see page 6). requirements of the room. Center frequencies are • Cut slightl
ملخص المحتوى في الصفحة رقم 11
DM1190 REAR PANEL: INPUTS AND OUTPUTS 7. Channels 1-5 Line Inputs are unbalanced RCA (Please refer to diagram on page 7) jacks. The Line Input is selected with the toggle switch on the front panel. 1. AC Cord. See safety precautions on page 3 for proper treatment of the power cord. You can connect stereo audio from HiFi VCRs, cassette and reel-to-reel tape decks, DAT machines, CD players, 2. GND is the grounding lug for turntables 1, 2 and 3 laser discs, tuners, even synthesizers or other mixi
ملخص المحتوى في الصفحة رقم 12
DM 1190 Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 12 http://www.numark.com
ملخص المحتوى في الصفحة رقم 13
DM1190 DM1190 CONNECTION DIAGRAM... Microphone 2 Keyboard Turntable 1 Tape Deck AC Outlet Zone Tape Deck Sound System CD Player Turntable 2 w/ Amplifier Main Turntable 3 Sound System w/ Amplifier Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 13 http://www.numark.com
ملخص المحتوى في الصفحة رقم 14
DM 1190 SPECIFICATIONS... INPUTS: Line:10kΩ input impedance 80 mV rms sensitivity (for 1.22 V output) Mic: 10kΩ input impedance balanced/unbalanced 2.5 mV rms sensitivity (for 1.22 V output) 500 mV rms max input Phono:47kΩ input impedance 1.5 mV rms sensitivity @ 1 KHz (for 1.22 V output) OUTPUTS: Line: 9V rms max (+20 dBm) Headphone Amp: .5 watt into 47Ω Distortion less than .01% EQUALIZER: 6-Band Stereo Graphic EQ Band centers 42 Hz, 152 Hz, 480Hz, 1.52KHz, 4.8KHz, 15.36KHz +/- 15 dB SIGNA
ملخص المحتوى في الصفحة رقم 15
DM1190 BLOCK DIAGRAM... Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 15 http://www.numark.com
ملخص المحتوى في الصفحة رقم 16
Professional Disc Jockey Products Warranty and Service Information Numark Industries, LLC and Numark International, Inc. (hereafter “Numark”) warrants each new product manufactured and/or supplied by it to be free from defects in material or workmanship under conditions of normal use and service for 360 days, beginning on the date of purchase from an authorized Numark Dealer, but not to exceed 2 years from date of shipment by Numark. The Numark obligation under this warranty is limited to repa
