ملخص المحتوى في الصفحة رقم 1
P
R
O
F
E
S
MATRIX-600 Specifications
Frequency Response (with filters and EQs disabled): 20 Hz – 20 kHz, +0/-1dB
MIXER:
Total Harmonic Distortion (at -10dB from rated power): <0.05%
Sensitivity / Impedance (for 1Vrms on PREAMP outputs,
Signal/Noise ratio
channels’ VOLUME controls and MASTER VOLUME in FCW position)
(A-weighted, reference to rated power): better than 100dB
Ch. 1-4: XLR and 1/4” TRS combo MIC inputs (balanced): 5 mV / 2 k OhmsΩ
Ch. 1-4: 1/4” TRS LINE inputs (balanced): 50 mV /
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Warnings and Important Information ...2 Rear Panel Controls ............... 9-10 Welcome Message / Contact details . . . 3 loudspeakers . . . . . . . . . . . . . . . . . . . 11 Important Safety Information ......... 4 Warranty . . . . . . . . . . . . . . . . . . . . . . 11 Features.........................5 Specifications . . . . . . . . . . . . . . . . . . . 12 Front Panel Controls................6-8 IMPORTANT INFORMATION HEED ALL WARNINGS 1) Read these instructions. WARNING: To reduce the ris
ملخص المحتوى في الصفحة رقم 4
The MATRIX-600 Powered Stereo Mixer with dSP THANk yOu FOR CHOOSING THE B-52 PROFESSIONAl MATRIX-600 SySTEM. The MATRIX-600 is the newest member of the popular B-52 MATRIX family of active systems. Compact, pow- erful and portable, the MATRIX-600 delivers clean, accurate sound ideal for both stage and music playback applications. The MATRIX-600 has a true 600-watt stereo amplifier, built-in 7-channel mixer, studio-quality digital effects, phantom power and numerous patch inputs / outputs. All
ملخص المحتوى في الصفحة رقم 5
Important Safety Information 1. REad iNSTRuCTiONS – All the safety and operating instructions should be read before this product is operated. lINE VOlTAGE SElECTION 2. RETaiN iNSTRuCTiONS – The safety and operating • The necessary line-in voltage may be set with the instructions should be retained for future reference. VOLTAGE SELECTOR switch on the rear panel of 3. HEEd WaRNiNgS – All warnings on the appliance the Matrix-600 (using a flat head screw driver). • When changing voltage
ملخص المحتوى في الصفحة رقم 6
The MATRIX-600: Features at a Glance MIXER: n Seven channels tailored for flexibility in applications such as Home POWER AMPlIFIER: Entertainment, Mobile DJ, Karaoke, Nightclub and Bar Installation n High current output stage with discrete devices, not integrated IC amps to n Four channels (Ch. 1-4) with balanced, combo 1/4” & XLR MIC inputs & balanced 1/4” jack line level inputs handle professional speakers v48Vdc phantom power on balanced combo 1/4” & XLR inputs for n Output pow
ملخص المحتوى في الصفحة رقم 7
MaTRiX-600 FRONT PaNEl CONTROlS & CONNECTORS 12. EFFECTS TO MONITOR: Controls the level of the DSP MASTER SECTION effects added to the mix on the MONITOR output. It affords flexibility of monitoring the mix without 1. Blue POWER lEd: indicates that the Matrix-600 added effects, or with lesser effects while providing is turned on. the full power of the DSP effects to the MAIN outputs. 2. MASTER VOluME: controls overall volume of the Matrix-600. INPuTS 1 to 4 3. Red PROTECT lEd: i
ملخص المحتوى في الصفحة رقم 8
6 7
ملخص المحتوى في الصفحة رقم 9
MaTRiX-600 FRONT PaNEl CONTROlS & CONNECTORS unbalanced high-impedance input for any stereo VOLUME and is controlled by its own LEVEL. line-level sources. 26. HOuSE lEVEl: Controls the volume of input signal 20. VOluME: Controls volume of the input signal. connected to the HOUSE STEREO LINE RCA inputs. 21. PAN/BAlANCE: Balances stereo image of stereo sources connected to the STEREO LINE INPUT, or INPuTS 1 to 6 pans the mono source connected to the MIC / INSTRUMENT INPUT. (All inp
ملخص المحتوى في الصفحة رقم 10
MaTRiX-600 REaR PaNEl CONTROlS & CONNECTORS 1. lOudSPEAkER OuTPuTS – RIGHT and lEFT: Connect to RIGHT and LEFT speakers accordingly. Use only speakers supplied with the system. The Matrix-600 is equipped with combo output connectors which accept both Speakon™ and 1/4” plug speaker cables for flexibility. The Matrix-600 comes includes a pair of 20’ high quality speaker cables with 1/4” plugs. We encourage you to upgrade these speaker cables to cables with Speak
ملخص المحتوى في الصفحة رقم 11
RCA output connectors to your recording device. You 12. POWER SWITCH: Press this switch to turn the can record the dry output signal (without DSP effects MATRIX-600 ON or OFF. The switch is illuminated mixed in) or the full output mix including effects by red in the ON position. switching EFFECTS to RECORD in the DSP section on 13. VOlTAGE SElECTOR SWITCH: DO NOT CHANGE the front panel. THIS SETTING WITH THE AC MAINS POWER 6. SuBWOOFER OuTPuT: Connect either balanced or ATT
ملخص المحتوى في الصفحة رقم 12
MaTRiX-600 SPEakERS MaTRiX-600 iNPuTS The three-way loudspeakers of the Matrix-600 system were designed to perfectly match to the Matrix-600 amplifier and mixer. The loudspeakers and electronics are optimized to deliv- er highest level of sonic performance. The Matrix-600’s loudspeakers employ custom made high excursion 10” woofers in a rear ported cabinet design for an extended bass response. The mid frequencies are reproduced by a 6.5” midrange drivers with large magnets for excellent c
