American DJ Volcano دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

American DJ® User Instructions
TM
VOLCANO
c
TM
Electronic Thermo Sensing (E.T.S.)
with ETS
NEVER POINT OR AIM ANY FOG MACHINE TOWARDS PEOPLE OR
SPECIFICATIONS:
THEIR CLOTHING. FOG MACHINES EMIT HOT VAPOR AND
MODEL - Volcano™
SHOULD BE USED WITH THE SAME CARE THAT YOU WOULD
OBSERVE WHEN USING AN ELECTRIC KETTLE OR IRON.
WEIGHT: 19 LBS.
DIMENSIONS: 7" X 8" X 21"
TO HELP PREVENT THE UNIT FROM CLOGGING, USE
FUSE: 7A AGC
AMERICAN DJ® CLEAN MACHINE™ LIQUID. CLEAN MACHINE IS
SUPPLY VOLTAGE: 120V
RECO

ملخص المحتوى في الصفحة رقم 2

the reservoir full. Plug the Volcano™ into a standard 120V electrical outlet. The unit will draw up to 6A of power. Connect the remote control into the rear of the machine. Turn the power switch to the “ON” position. After turning the unit on, the red L.E.D. on the remote will glow indicating that the unit is receiving power. After the machine initial warm up period, of approximately four (4) minutes, the green L.E.D. on the remote will glow indicating that the machine is now ready for us

ملخص المحتوى في الصفحة رقم 3

Low Fluid Indicator Because pump failure becomes one of the biggest problems when running a fog machine dry of fluid, and leading cause fog machine failure we have added a “Low Fluid Indicator” feature. This feature stops the machine operation when the fluid level has gone down too low. The “Low Fluid Indicator” L.E.D. is located on the back of the Volcano™ next to the On/Off switch. This indicator will begin to flash red and green when fluid level has gone down too low (red-red-green-green)