ملخص المحتوى في الصفحة رقم 1
Utopia 250S™ General Information
Unpacking: Thank you for purchasing the Utopia 250S™ by Ameri-
American DJ®
can DJ®. Every Utopia 250S™ has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fi xture for any
damage and be sure all equipment necessary to operate the unit has
arrived intact. In the event damage ha
ملخص المحتوى في الصفحة رقم 2
Utopia 250S™ General Instructions Utopia 250S™ Safety Precautions To reduce the risk of electrical shock or fi re, do not expose this unit To optimize the performance of this product, please read these operat- rain or moisture ing instructions carefully to familiarize yourself with the basic operations Do not spill water or other liquids into or on to your unit. of this unit. These instructions contain important safety information Be sure that the local power out
ملخص المحتوى في الصفحة رقم 3
Utopia 250S™ Controls and Functions Utopia 250S™ Controls and Functions 1. Thumb Screw - This thumb screw holds the lamp socket assembly REAR cover (16) into place. 6 1 7 2. Microphone - This microphone receives external low frequencies 7 2 to trigger the unit in Sound-Active and Master/Slave mode. 8 3 3. Audio Sensitivity Knob - This adjust audio sensitivity of the 9 4 internal microphone (3). Turning the sensitivity knob in the clockwise direction will increase the sensitivity t
ملخص المحتوى في الصفحة رقم 4
Utopia 250S™ Controls and Functions Utopia 250S™ Operation DMX signal to another DMX fi xture, or transmit a Master/Slave signal on pages 5 - 7 as well as the set-up specifications that are included to the nest Utopia 250S™ in the chain. For best results in DMX or with your DMX controller. Master/Slave mode terminate this jack if it is the last unit in the 3. Use the controller’s faders to control the various DMX fixture traits. chain. See “Terminator” on page 7. 4. Th
ملخص المحتوى في الصفحة رقم 5
Utopia 250S™ Operation Utopia 250S™ Set Up Dip Switch 1 address equals 1 2. Follow the chart on page 14 for proper unit dip switch settings. DMX CHANNEL Dip Switch 2 address equals 2 3. The optional Utopia/C Blackout Mini-Controller may be used with 28 32 128 SP Dip Switch 3 address equals 4 this function for blackout. Dip Switch 4 address equals 8 4. After all the units settings have been set and are plugged in, adjust Dip Switch 5 address equals 16 the s
ملخص المحتوى في الصفحة رقم 6
Utopia 250S™ Set Up Utopia 250S™ Fuse & Lamp Replacement Notice: Be sure to follow fi gures two and three when making your own Caution: Always replace with the exact same type lamp and fuse, cables. Do not use the ground lug on the XLR connector. Do not con- unless otherwise specified by an authorized American DJ® technician. nect the cable’s shield conductor to the ground lug or allow the shield Replace with anything other than the specified part can damage your conductor to c
ملخص المحتوى في الصفحة رقم 7
Utopia 250S™ Cleaning Utopia 250S™ DMX Traits This chart below details the DMX traits. The individual trait can only be Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the accessed an universal DMX controller. internal and external optical lenses and mirror should be carried out periodically to optimize light output. Cleaning frequency depends on DMX CHANNEL the environment in which the fixture operates (I.e. smoke, fog residue, 4 12 3 dust, dew)
ملخص المحتوى في الصفحة رقم 8
Utopia 250S™ DMX Dip Switch Chart Technical Specifications: This chart list the DMX dip switch setting for DMX address 1 through Model: Utopia 250S™ 511. Follow the instructions below to configure fixture dip switches with Lamps: ZB-ELC, 24v/250w your desired DMX address. Voltage: 120v/60Hz or 220v/50Hz Dimensions: 20”(H) x 8.5”(W) x 9.25”(D) DMX Address Quick Reference Chart with yoke collapsed Colors Multiple DIP SWITCHES Gobos: 17, plus spot Dip Switch Positio
