ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
Product name: Network Camera (FD6111V/FD6121V) Release Date: 2005/08/15 Manual Revision: 1.00 Web site: www.vivotek.com Email: technical@vivotek.com sales@vivotek.com Made in Taiwan. ©Copyright 2000-2005. All rights reserved - 1 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
ملخص المحتوى في الصفحة رقم 3
Before You Use This Product The use of surveillance devices may be prohibited in your country by law. The Network Camera is not only a high-performance web-ready camera but also can be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use. It is important to first verify that all contents received are complete according to the list in the "Package Contents
ملخص المحتوى في الصفحة رقم 4
Package Contents FD6111V/FD6121V Software CD Quick installation guide Power adapter Screw Pack Warranty card - 3 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
ملخص المحتوى في الصفحة رقم 5
Table of Contents Before You Use This Product....................................................................2 Package Contents ....................................................................................3 Table of Contents.......................................................................................... 1 Installation..............................................................................................4 Hardware Installation ........................
ملخص المحتوى في الصفحة رقم 6
Demo on Multiple Sites – Mid-scale Service................................. 24 Product Demo for E-business – Large-scale Service ..................... 24 If the web space has FTP service............................................... 25 If the web space has no FTP service .......................................... 26 Build a Security Application............................................................ 28 Send Snapshots When Motion is Detected ................................
ملخص المحتوى في الصفحة رقم 7
C. URL commands of Network Camera .................................................. 61 Overview..................................................................................... 61 Style convention........................................................................... 61 General CGI URL syntax and parameters ......................................... 62 Get server parameter values .......................................................... 62 Set server parameter values .
ملخص المحتوى في الصفحة رقم 8
Installation Hardware Installation Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in length. Connect the power adapter jack to the Network Camera before plugging in to the power socket. This will reduce the risk of accidental electric shock. Upon powering
ملخص المحتوى في الصفحة رقم 9
Consult with the dealer of the peripherals for correct installation. 1 SW_NOPEN OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC) 2 SW_COMMON OUTPUT (open from SW_OPEN at initial state) (close with SW_OPEN when set DO to ON) 3 DI+ INPUT (Max. 50mA, 12VDC) 4 DI- INPUT (Initial state of DI is low) Mount the Camera 1. Use the supplied wrench to remove the dome cover - 5 - www.vivotek.com T: 886-2-82455282 F: 886-2-824
ملخص المحتوى في الصفحة رقم 10
2. Fix the camera to the wall/ceiling with four supplied screws 3. Make connections - 6 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
ملخص المحتوى في الصفحة رقم 11
4. Use the pan/tilt mechanism to set the camera to a proper position; then adjust the zoom and focus of the lens with zoom and focus lock screw 5. Attach the dome cover back to the camera - 7 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
ملخص المحتوى في الصفحة رقم 12
Waterproof Process To completely avoid the camera from water sock, apply waterproof process if necessary. 1. Utilize silicone clay or similar waterproof material applied to the screws, screw holes and other necessary portions. 2. Tape the junction points of the connecters on the cable. - 8 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
ملخص المحتوى في الصفحة رقم 13
Software Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. At the end of the hardware installation, the Administrator must place the product software CD into the CD-ROM drive of the PC running in MS Windows. An auto-run program will pop up (If the program is not on auto-run, go to the root directory of the software CD and c
ملخص المحتوى في الصفحة رقم 14
Upon Installation Wizard’s start up, a searching box will pop up. This program searches for Vivotek’s product on the same LAN: After searching, Vivotek Video Servers or Network Cameras will be located by the Installation Wizard. There may be several entries shown in the window. The Administrator may differentiate the Network Cameras with the serial number. - 10 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
ملخص المحتوى في الصفحة رقم 15
For the series number in the “Serial Number” field, please check the label on the bottom of the camera. The IP addresses shown in the "Current IP Address" field reflect those on the local network. They may be from the DHCP server. If there is no DHCP server, the camera will try to find a free IP address (this takes from 15 second to 3 minutes, depending on the LAN status). The method of finding IP address is seeking from 192.168.0.99, to 192.168.0.254. If any of the a
ملخص المحتوى في الصفحة رقم 16
For more detailed usage of the Installation Wizard, please refer to the user’s manual of the Installation Wizard. - 12 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
ملخص المحتوى في الصفحة رقم 17
Initial Access to the Network Camera Installing Plug-in For the initial access to the Network Camera in Windows, the web browser may prompt for permission to install a new plug-in for the Network Camera after a period of time of downloading. Permission request depends on the Internet security settings of the user’s PC or notebook. If the highest security level is set, the computer may prohibit any installation and execution attempt. This plug-in has been registered for cert
ملخص المحتوى في الصفحة رقم 18
Check Network Settings The Network Camera can be connected either before or immediately after software installation onto the Local Area Network. The Administrator should complete the network settings on the configuration page, including the correct subnet mask and IP address of gateway and DNS. Ask your network administrator or Internet service provider for the detail information. By default the Network Camera requires the Administrator to run installation every time it reboot
ملخص المحتوى في الصفحة رقم 19
How to Use Authentication After opening the web browser and typing in the URL of the Network Camera, a dialogue window pops up to request a username and password. The foreground is the login window and the background shows the message if authentication fails. The user may check the option box to save the password for future convenience. - 15 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
ملخص المحتوى في الصفحة رقم 20
Primary User’s Capabilities Main Screen with Camera View The main page layout has two parts: Configuration functions: The camera can be configured using these user interfaces. Camera View: What the camera sees. - 16 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
