ملخص المحتوى في الصفحة رقم 1
800000-pixel IEEE1394 Monochrome CCD Camera
CS3950DiF
Specification
Document No. D4134648A
ملخص المحتوى في الصفحة رقم 2
Contents 1. Overview ................................................................................................................1 2. Features .................................................................................................................1 3. Components ..........................................................................................................1 4. Specifications.....................................................................................
ملخص المحتوى في الصفحة رقم 3
Safety Precaution Before using this product, read these safety precautions carefully. Important information is shown in this Instruction Manual to protect users from bodily injuries and property damage, and to enable them to use the product safety and correctly. Please be sure to thoroughly understands the meanings of the following sings and symbols before reading the main text that follow, and observe the instructions given herein. [Definition of Safety Signs] Safety Signs Descriptio
ملخص المحتوى في الصفحة رقم 4
[General Handing] WARNING Immediately cease use of the equipment in the event of abnormality or malfunction. If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign matter, or if the equipment is dropped or malfunctions, fire or electric shock may result. unplug If such abnormalities occur, disconnect the power plug from the outlet and contact your sales representative. Do not use the equipment in locations subject to water spl
ملخص المحتوى في الصفحة رقم 5
[General Handing] CAUTION Observe the following when installing the equipment: · Do not cover the equipment with a cloth, etc. · Do not place the equipment in a narrow location where heat is likely to accumulate. Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire. Instruction Do not place the equipment in locations subject to high moisture, oil fumes, steam, or dust. Otherwise, fire or electric shock may result. Avoid Do not ins
ملخص المحتوى في الصفحة رقم 6
CASES FOR INDEMNITY (LIMITED WARRANTY) We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in the following cases. In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party, deliberate or accidental misuse by the user, or use under extreme operating conditions. In the case of indirect, additional, consequential damages (loss of business interests, suspension of business ac
ملخص المحتوى في الصفحة رقم 7
This product can be used under diverse operating conditions. Determination of applicability of equipment or devices concerned shall be determined after analysis or testing as necessary by the designer of such equipment or devices, or personnel related to the specifications. Such designer or personnel shall assure the performance and safety of the equipment or devices. This product is not designed or manufactured to be used for control of equipment directly concerned with human l
ملخص المحتوى في الصفحة رقم 8
Notes on using this product Handle carefully Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause malfunctions. Further, do not damage the connection cable, since this may cause wire breakage. Environmental operating conditions Do not use the product in locations where the ambient temperature or humidity exceeds the specifications. Otherwise, image quality may be degraded or internal components may be adversely aff
ملخص المحتوى في الصفحة رقم 9
Maintenance Turn off power to the equipment and wipe it with a dry cloth. If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with diluted neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such chemicals may damage or discolor the paint and indications. If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative. Disposal When disposing of the camera
ملخص المحتوى في الصفحة رقم 10
1. Overview This CCD camera is a one-body type monochrome camera that adopts all-pixel-data-readout interline CCD that is compatible with the XGA format. For video output, the serial digital bus standard "IEEE1394" is adopted for high transfer rate. 2. Features •••• 1/3 progressive scan CCD Adopts the square-grid-array, all-pixel-data-readout interline CCD. •••• High frame rate Realizes video output at a high frame rate of 30 frames/second. •••• Random trigger shutter function E
ملخص المحتوى في الصفحة رقم 11
4. Specifications [Electrical specifications] Image sensor : 1/3 type all-pixel-data-readout interline transfer CCD Total number of pixels : 1077 (H) × 788 (V) Approx. 850,000 pixels Number of effective pixels : 1034 (H) × 779 (V) Approx. 800,000 pixels No. of video output effective pixels : 1024 (H) × 768 (V) Approx. 790,000 pixels Pixel cell size : 4.65μm (H) × 4.65μm (V) Sensitivity : 400lx, F5.6 Minimum illumination : 4lx, F1.4 (Gain: Max., approx. 50% of video output) Gain settin
ملخص المحتوى في الصفحة رقم 12
[Operating ambient specifications] Performance guarantee temp./humidity : 0 ~ +40 °C / 30 ~ 70 %RH (No condensation) Operating temperature/humidity : −5 ~ +45 °C / 30 ~ 90 %RH (No condensation) Storage temperature/humidity : −20 ~ +60 °C / 10 ~ 90 %RH (No condensation) [Mechanical specifications] Lens mount : C-mount Dimensions : Detailed in the outline drawing Mass : Approx. 170 g Chassis grounding/insulation : Between connector shell and FG Continuity provided : Between FG and
ملخص المحتوى في الصفحة رقم 13
[Applicable safety standards] EMC (Electro –Magnetic Compatibility) EMI (Electro-Magnetic Interference) : EN61000-6-4 / 2001 EMS (Electro-Magnetic Susceptibility) : EN61000-6-2 / 2001 FCC : FCC Part15 Subpart B class A * Conformity of EMC conditions About the conformity of the EMC standard of this machine, it has guaranteed in the conditions combined with the recommended parts. When used combining parts other than specification of our company, I ask you to have final EMC c
ملخص المحتوى في الصفحة رقم 14
[IEEE1394 connector pin arrangement] IEEE1394 connector : HSB-ARD62-SN15A (DDK Ltd.) Recommended harness : HSB-HC□-A07 (DDK Ltd.) Pin arrangement : Refer to the table below. Pin No. Signal name I/O Remark 1 POWER I 2 POWER (GND) I 3 I/O TPB− 4 TPB+ I/O 5 TPA− I/O 6 TPA+ I/O [TRIG pin connector] Connector : HR25-7TR-4PA (Hirose Electric Co., Ltd.) Applicable connector : HR25-7TP-4S (Hirose Electric Co., Ltd.) * Not attached to this product. Pin arrangement : Refer
ملخص المحتوى في الصفحة رقم 15
5. Functions •••• Gain Control This camera adopts the manual gain setting method. The factory setting is 0dB (rated image pickup state). By adjusting the setting value of the command status register of the camera via the IEEE1394 serial bus, you can set the gain in 121 steps in the range between −6 to +10dB. However, the amount of gain change per step is not constant because of the variable characteristic of the gain control amplifier. •••• Shutter mode switching You can switch the
ملخص المحتوى في الصفحة رقم 16
•• Scalable mode •• This camera has the scalable mode that can read out defined area of the screen. The horizontal and vertical minimum unit sizes, at 32 × 24 pixels, both represent a 32-part split of total screen horizontal and vertical sizes. A read out area can be designed by start address (i, j). However, specify an address by every 4 pixels. Only continuous square units can be selected, concave or convex shape cannot be selected. Window of 32 × 24 pixels per unit : 32*m(H) × 24*
ملخص المحتوى في الصفحة رقم 17
6. Timing charts For video data output of this camera, Isochronous transmission of IEEE1394 is used. For the timing values defined below, a necessary condition is that this camera can use the isochronous band without any restriction from other node. If any node is performing Isochronous transmission on the IEEE1394 local bus concurrently with this camera, the values are not a defined below. •••• Format1_mode5 [Electronic Shutter OFF] approx. 33ms * VD Camera internal CCD signal
ملخص المحتوى في الصفحة رقم 18
* [Electronic shutter mode, 33ms ＜Exposure time] approximately epual to integration VD Camera SUB internal signal CCD exposure Integrate time register value VIDEO DATA Image Image (Camera output） * At frame rate 30fps. 15fps : approx. 66.7ms, 7.5fps : approx. 133ms, 3.75fps : approx. 266.7ms. [Electronic shutter mode, Random trigger shutter mode, Exposure time: Register Value control] TRIG disabled time approx. 33ms * TRIG （Ext. IN） Integrate time register
ملخص المحتوى في الصفحة رقم 19
•••• Format7_mode0 [Electronic Shutter OFF] TEXP VD Camera internal CCD signal exposure VIDEO DATA Image Image (Camera output） * Please refer to "Calculation of Frame Rate in Format_7" of the Application manual for the T . EXP [ Electronic shutter mode, T ≧Exposure time] EXP TEXP VD Camera internal SUB signal CCD Integrate time Integrate time exposure register value register value VIDEO DATA Image Image (Camera output） * Please refer to "Calc
ملخص المحتوى في الصفحة رقم 20
[Electronic shutter mode, Random trigger shutter mode, Exposure time: Register Value control] TRIG disabled time TEXP TRIG （Ext. IN） Integrate time register value approx 2.6μs CCD exposure （Camera inside） VIDEO DATA Image （Camera output） * Please refer to "Calculation of Frame Rate in Format_7" of the Application manual for the T . EXP [Electronic shutter mode, Random trigger shutter mode, Exposure time: Pulse width control] TRIG disabled time TEXP TRIG （Ext.
