ملخص المحتوى في الصفحة رقم 1
INSTRUCTION MANUAL
CCD COLOR CAMERA
IK-6210A/IK-6410A
Please read this manual thoroughly before use, and keep it handy
for future reference.
Record in space provided below the Model # and
the Serial # as found on the label on the bottom of
this unit.
Model # Serial #
Retain this information for future reference.
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS........................................ 2
1. FEATURES AND DESCRIPTION ................................. 4
2. COMPONENTS ...................
ملخص المحتوى في الصفحة رقم 2
IMPORTANT SAFEGUARDS 1. Read Instructions 13. Lightning All the safety and operating instructions should be For additional protection on this video product during read before the product is operated. a lightning storm, or when it is left unattended and 2. Retain Instructions unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable The safety instructions and instruction manual should be retained for future reference. system. This will prevent dama
ملخص المحتوى في الصفحة رقم 3
• The CAUTION label, shown on the left, is attached on the camera. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightening flash with arrowhead WARNING : symbol, within an equilateral triangle, TO REDUCE THE RISK OF FIRE OR is intended to alert the user to the ELECTRIC SHOCK, DO NOT EXPOSE presence of uninsulated “dangerous THIS APPLIANCE TO RAIN OR voltage” within the product’s
ملخص المحتوى في الصفحة رقم 4
1. FEATURES AND DESCRIPTION 1. 24V AC/12V DC dual-voltage capable extends power choice. 2. Camera has the ability to automatically switch the display to color in daylight or black and white at night. 3. Camera synchronization mode is selectable between internal and line-lock. 4. The shutter speed is automatically adjusted according to the subject brightness. 5. Back Light Compensation (BLC) adjusts for strong backlight conditions. 6. White balance is automatically adjusted depending on color tem
ملخص المحتوى في الصفحة رقم 5
3. PART NAMES AND FUNCTIONS - 5 - 01_p2-p32 5 06.8.7, 11:08 AM Left side View Auto-IRIS Terminal Focus ring: Rotate the ring to appropriate setting. Top View AES / VIDEO / DC select switch: AES : Auto electronic shutter function. VIDEO : When using Al lens (with amp). DC : When using AI lens (without amp). Video output terminal: Focus Lock Screw connect to a TV monitor, etc. Front View Rear View Right Side View 50 (1.97) LEVEL: 63 (2.48) 116 (4.57) DC - Type AI Lens 24V AC/12V DC adjustment t
ملخص المحتوى في الصفحة رقم 6
4. CAMERA INSTALLATION Wall 9.5 (0.37) Installation Example 1/4"-20UNC 112 (4.41) 15 (0.59) The Installation example is for reference only. Mounting bracket is not included. Dimensions : mm (inch) - 6 - 01_p2-p32 6 06.8.7, 11:08 AM 4 (0.16) φ6 (0.24) 80 (3.15)
ملخص المحتوى في الصفحة رقم 7
5. CONNECTIONS AND OPERATIONS Notes on connecting •Power plugs of connected equipment must be disconnected before camera installation. •A 75-ohm coaxial cable with connector (3C-2V or 5C-2V) is required for standard connection. •For details of wiring and operation of equipment to be connected, refer to their operation manuals. • Lens, power supply with cable, connectors and coaxial cable are not supplied with the camera. 5-1. Basic connection Single system configuration MONITOR TV CAMERA 24V AC
ملخص المحتوى في الصفحة رقم 8
5-2. Line-Lock Control • Matching the vertical synchronization with the power frequency is called the Line-Lock. • This function is activated when the LL switch is set to ON. ON OFF LL • When two or more cameras are switched by the video switcher for viewing by a monitor TV, the vertical sync. phase can be locked to the power frequency, and a stable vertical sync. is obtained without being disturbed at the time of switching. MONITOR TV CAMERA1 CAMERA2 VIDEO SWITCHER TO 24V AC UL Listed Class 2
ملخص المحتوى في الصفحة رقم 9
6. LENS Back-Focus Adjusment Back-Focus is adjusted at the factory to accommodate most standard lenses. Sometimes, slight adjustment to the camera back-focus is Focus Lock Screw necessary. Loosen the Focus Lock Screw. Achieve a clear image by rotating the focus ring. Tighten the Focus Lock Screw. Focus ring Auto-iris Lens IRIS This camera supports two types of auto-iris lens: Video and DC (direct drive) types. Connect the auto-iris connector plug to the IRIS terminal on the side of the camera. R
ملخص المحتوى في الصفحة رقم 10
7. LINE-LOCK PHASE If two or more cameras within a system have different AC line phases are switched by the video switcher, the picture on the monitor TV will fluctuate vertically. Connect 24V AC input lines of all cameras so that they all share the same phase. If you still have vertical fluctuation, adjust the V.PHASE controller. V. PHASE CONTROLLER Note: • Refer to “5-2. Line-Lock Control”. - 10 - 01_p2-p32 10 06.8.7, 11:08 AM
ملخص المحتوى في الصفحة رقم 11
8. AUTOMATIC ELECTRONIC SHUTTER (AES) Exposure time is controlled automatically within a range of 1/60 sec. to 1/100000 sec. to obtain an adequate signal when the IRIS switch is moved to AES. When the back panel switch is turned to VIDEO or DC, the exposure time is fixed 1/60 sec. 9. BACKLIGHT COMPENSATION (BLC) To activate backlight compensation, set the BLC switch to ON. ON OFF BLC When the automatic electronic iris feature is used with an auto iris lens, the exposure adjustment is automatical
ملخص المحتوى في الصفحة رقم 12
10. NOTES ON USE AND INSTALLATION • Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. • Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction. •Treat the camera with care Do not drop the camera or subject it to intense vibration. •Never touch internal parts Do not touch the internal parts of the camera other than the parts specified. • D
ملخص المحتوى في الصفحة رقم 13
12. SPECIFICATIONS IK-6210A Power 24V AC ~ ±10% 60Hz / 12V DC ±10% Power consumption 3.5W with Al lens Image sensor 1/3 inch CCD image sensor Image pickup area 0.194 inch (4.92 mm) horizontal x 0.145 inch (3.69 mm) vertical Effective picture element 510 horizontal x 492 vertical Scanning system 2:1 interlace NTSC Standard TV system Scanning frequency 15.75 KHz horizontal 60 Hz vertical Synchronization Line-Lock, Internal manually switchable Resolution 350 Horizontal TV lines Minimum illuminance
ملخص المحتوى في الصفحة رقم 14
IK-6410A Power 24V AC ~ ±10% 60Hz / 12V DC ±10% Power consumption 3.5W with Al lens Image sensor 1/3 inch CCD image sensor Image pickup area 0.194 inch (4.92 mm) horizontal x 0.145 inch (3.69 mm) vertical Effective picture element 771 horizontal x 492 vertical Scanning system 2:1 interlace NTSC Standard TV system Scanning frequency 15.75 KHz horizontal 60 Hz vertical Synchronization Line-Lock, Internal manually switchable Resolution 480 Horizontal TV lines Minimum illuminance of subject 0.2 lux
ملخص المحتوى في الصفحة رقم 15
13. EXTERIOR VIEW Dimensions : mm (inch) - 15 - 01_p2-p32 15 06.8.7, 11:08 AM 1/4"-20UNC 50 (1.97) 3.5 116 (4.57) 63 (2.48) 1/4"-20UNC
ملخص المحتوى في الصفحة رقم 16
LIMITED WARRANTY CCD SECURITY CAMERA IK-6210A/IK-6410A The Imaging System Division ("ISD") of Toshiba America Information Systems, Inc. makes the following limited warranties with regard to this CCD Camera Model IK-6210A/IK-6410A ("Product"). These limited warranties extend to the Original End-User ("You[r]"). Three (3) Year Limited Warranty of Labor and Parts ISD warrants that this Product will perform in accordance with specifications for a period of three (3) years from the date of purchase b
