TOA Electronics C-CV202-3 CU دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTRUCTION MANUAL
COLOR DOME CAMERA C-CV202-3 CU
Thank you for purchasing TOA's Color Dome Camera.
Please carefully follow the instructions in this manual in order to ensure long, trouble-free use of your color dome camera.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very import

ملخص المحتوى في الصفحة رقم 2

4. NOMENCLATURE 2. GENERAL DESCRIPTION The C-CV202-3 Color Dome Camera is an indoor-use camera and is equipped with a high-resolution camera and lens. It is designed to bottom view [ ] operate on 12 V DC, which is supplied by an external power supply unit. Since its 2X vari-focal, auto-iris lens is built inside the camera, its angle of view can be manually adjusted. 3 3. HANDLING PRECAUTIONS 5 • Do not direct the camera lens to the sun or strong lighting or light reflection. • Do not give the c

ملخص المحتوى في الصفحة رقم 3

4. Mount the camera section to the ceiling using 2 mounting screws. Because the mounting screws are not supplied with the camera, prepare appropriate screws for the application. (Use screws that are over 4 mm in nominal diameter and longer than 25 mm.) 5. Attach the dome cover to the camera section after completing all necessary adjustments. Attach the dome cover with its projection aligned Insert the dome cover to the camera section, then turn it clockwise with the mounting hole of Mounting

ملخص المحتوى في الصفحة رقم 4

8. ABOUT THE MODE SETTING SWITCH Set the Mode Setting switch for the best possible picture reproduction depending on installation conditions. ( ) 1. Adjustment ALC/ AES switch ON ON 2. ATW/ AWB switch ( ) 3. Backlight Compensation BLC switch OFF 1 2 3 4 4. Shutter Speed switch Mode Setting switch (Factory-preset setting) Adjustment (ALC/ AES) switch Backlight Compensation (BLC) switch Set this switch when adjusting the lens focus. Set this switch so that the subject is not displayed in b