ملخص المحتوى في الصفحة رقم 1
4-487-947-12(1)
Interchangeable Lens
Digital Camera
Instruction Manual
E-mount
ILCE-5000
ملخص المحتوى في الصفحة رقم 2
English Learning more about the camera (“Help Guide”) “Help Guide” is an on-line manual. Refer to it for in-depth instructions on the many functions of the camera. 1 Access the Sony support page. http://www.sony.net/SonyInfo/Support/ 2 Select your country or region. 3 Search for the model name of your camera on the support page. � Check the model name on the bottom of your camera. Viewing the Guide This camera is equipped with a built-in instruction guide. MENU (In-Camera Guide) In-Camera Gui
ملخص المحتوى في الصفحة رقم 3
Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. Model No. ILCE-5000 Serial No. _____________________________ Model No. AC-UB10C/AC-UB10D Serial No. _____________________________ WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS -SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE
ملخص المحتوى في الصفحة رقم 4
� Keep the battery pack out of the reach of small children. � Keep the battery pack dry. � Replace only with the same or equivalent type recommended by Sony. � Dispose of used battery packs promptly as described in the instructions. [ AC Adaptor Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using the apparatus. The power cord (mains lead), if supplied, is designed spec
ملخص المحتوى في الصفحة رقم 5
For Customers in the U.S.A. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669) The number below is for the FCC related matters only. [ Regulatory Information Declaration of Conformity Trade Name: SONY Model No.: ILCE-5000 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part15 of the FCC Rules. Operation is subject to the following
ملخص المحتوى في الصفحة رقم 6
For Customers in Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. For Customers in Europe [ Notice for the customers in the countries applying EU Directives Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan For EU produ
ملخص المحتوى في الصفحة رقم 7
[ Disposal of waste batteries and electrical and electronic equipment (applicable in the European Union and other European countries with separate collection systems) This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.
ملخص المحتوى في الصفحة رقم 8
Table of contents Preparing the camera Step 1 P. 9 – Checking the supplied items – Identifying parts – Inserting the battery pack – Charging the battery pack – Attaching/removing the lens – Inserting a memory card (sold separately) – Setting the clock Basic operation Step 2 P. 21 – Shooting still images/movies Playback function Step 3 P. 22 – Viewing images Recording function Step 4 P. 23 – Introduction of other functions Importing images to the computer P. 29 – Features of PlayMemories Home Add
ملخص المحتوى في الصفحة رقم 9
Checking the supplied items First check the model name of your camera (page 8). The accessories supplied differ depending on the model. The number in parentheses indicates the quantity. � Instruction Manual (this manual) x Supplied with all models (1) � Camera (1) � Wi-Fi Connection/One-touch � Power cord (mains lead) (1)* (not (NFC) Guide supplied in the U.S.A. and Canada) This guide explains the functions that require a Wi-Fi connection. x ILCE-5000L � E16 – 50 mm zoom lens (1) * Multipl
ملخص المحتوى في الصفحة رقم 10
Identifying parts E For shooting: W/T (zoom) lever For viewing: (Index)/ (Playback zoom) lever F AF illuminator/Self-timer lamp G Image sensor position mark H Flash 1) I Microphone J Lens K Lens release button When the lens is removed L Mount 2) M Image sensor 2) N Lens contacts 1) Do not cover this part during movie recording. 2) Do not touch this part directly. A Shutter button B ON/OFF (Power) switch C Hook for shoulder strap D (N Mark) � Touch the mark when you connect the camera to a sm
ملخص المحتوى في الصفحة رقم 11
A Battery cover A (Flash pop-up) button B Battery eject lever B LCD screen C Battery insertion slot � You can adjust the LCD screen to D Connection plate cover an easily viewable angle and � Use this when using an AC- shoot from any position. PW20 AC Adaptor (sold separately). Insert the connection plate into the battery compartment, and then pass the cord through the connection plate cover as shown below. C Access lamp D Memory card/terminal cover E Wi-Fi sensor (built-in) F MOVIE (Movie
ملخص المحتوى في الصفحة رقم 12
x Lens E55 – 210 mm F4.5 – 6.3 OSS (supplied with See page 37 on the specifications of ILCE-5000Y) the lenses. E PZ 16 – 50 mm F3.5 – 5.6 OSS (supplied with ILCE-5000L/ILCE-5000Y) A Zooming/Focusing ring B Zooming lever C Mounting index A Focusing ring 1) D Lens contacts B Zooming ring C Focal-length scale 1) Do not touch this part directly. D Focal-length index 1) E Lens contacts F Mounting index 1) Do not touch this part directly. GB 12
ملخص المحتوى في الصفحة رقم 13
Inserting the battery pack Battery eject lever Open the cover. 1 Insert the battery pack. 2 � While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery eject lever locks after insertion. � Closing the cover with the battery inserted incorrectly may damage the camera. GB 13
ملخص المحتوى في الصفحة رقم 14
Charging the battery pack For customers in the USA and Canada Power cord (Mains lead) Charge lamp Lit: Charging Off: Charging finished Flashing: Charging error or charging paused For customers in countries/ temporarily because the camera is not regions other than the USA within the proper temperature range and Canada Connect the camera to the AC Adaptor (supplied), 1 using the micro USB cable (supplied). Connect the AC Adaptor to the wall outlet (wall socket). 2 The charge lamp lights orang
ملخص المحتوى في الصفحة رقم 15
� The battery pack may not be effectively charged if the terminal section of the battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton swab to clean the terminal section of the battery. � Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If malfunctions occur while using the AC Adaptor, disconnect the plug from the wall outlet (wall socket) immediately to disconnect from the power source. � When charging is finished, disconnect the
ملخص المحتوى في الصفحة رقم 16
x Battery life and number of images that can be recorded and played back Battery life Number of images Shooting (still images) Approx. 210 min. Approx. 420 images Typical movie shooting Approx. 95 min. — Continuous movie shooting Approx. 150 min. — Viewing (still images) Approx. 470 min. Approx. 9400 images Notes � The above number of images applies when the battery pack is fully charged. The number of images may decrease depending on the conditions of use. � The number of images that can be r
ملخص المحتوى في الصفحة رقم 17
Attaching/removing the lens Set the power switch of the camera to OFF before you attach or remove the lens. If the cap or the packaging lid is attached, remove it from 1 the camera or the lens. � Quickly change the lens somewhere away from dusty locations to keep dust or debris from getting inside the camera. Mount the lens by aligning the white index marks on the 2 lens and the camera. � Hold the camera facing down to prevent dust from entering into the camera. While pushing the lens light
ملخص المحتوى في الصفحة رقم 18
x Removing the lens Lens release button Press the lens release button all the way in and turn the 1 lens counterclockwise until it stops. Notes � If dust or debris gets inside the camera while you are changing the lens and adheres to the surface of the image sensor (the part that converts the light source to a digital signal), it may appear as dark spots on the image, depending on the shooting environment. The camera vibrates slightly when it is turned off, due to the anti-dust function, to
ملخص المحتوى في الصفحة رقم 19
Inserting a memory card (sold separately) Ensure that the notched corner is faced correctly. Open the cover. 1 Insert the memory card (sold separately). 2 � With the notched corner facing as illustrated, insert the memory card until it clicks into place. Close the cover. 3 x Memory cards that can be used Memory card For still images For movies Memory Stick XC-HG Duo™ A Memory Stick PRO Duo™ (Mark2 only) Memory Stick PRO-HG Duo™ SD memory card (Class 4 or faster) B SDHC memory card (Class 4 or
ملخص المحتوى في الصفحة رقم 20
Setting the clock ON/OFF (Power) Control wheel Select items: v/V/b/B// Set: z Set the ON/OFF (Power) switch to ON. 1 The Date & Time setting is displayed when you turn on the camera for the first time. � It may take some time for the power to turn on and allow operation. Check that [Enter] is selected on the screen, then press 2 z on the control wheel. Select a desired geographic location by following the 3 on-screen instructions, then press z. Set [Daylight Savings], [Date/Time] and [Date Fo
