ملخص المحتوى في الصفحة رقم 1
Network Camera
Operating Instructions
Model No. WV-NP304
(Lens is option.)
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
WV-NP304
LOCK
ملخص المحتوى في الصفحة رقم 2
CONTENTS Preface ............................................................................................................................ 3 About these operating instructions .............................................................................. 3 Trademarks and registered trademarks ...................................................................... 3 Viewer software ........................................................................................................... 3 Moni
ملخص المحتوى في الصفحة رقم 3
Preface About these operating instructions There are 3 sets of operating instructions as follows. • Installation Guide • Operating instructions • Setup Instructions These operating instructions contain descriptions of how to operate this product* using a PC via a network and of how to configure the settings. Refer to the installation guide for descriptions of how to install this product and of how to connect to a network. ® ® Adobe Reader is required to read PDF. When the Adobe Reader is not ins
ملخص المحتوى في الصفحة رقم 4
Monitor images on a PC The following are descriptions of how to monitor images from the camera on a PC. Monitor images from a single camera Step 1 Start up the web browser. Step 2 Enter the IP address designated using the Panasonic IP setup software in the address box of the browser. Example when entering an IPv4 address: http://192.168.0.10 Example when entering an IPv6 address: http://URL registered using IPv6 address http://[IPv6 address] Important: • To enhance the security, change the passw
ملخص المحتوى في الصفحة رقم 5
The refresh interval may be longer depending on a • When "On" is selected for "MPEG-4 transmission" network environment, PC spec, photographic sub- JPEG (VGA or QVGA): 15 fps ject, access traffic, etc. JPEG (1 280 x 960): 5 fps • When "Off" is selected for "MPEG-4 transmission" Refer to the following page for further information about JPEG (VGA or QVGA): 30 fps the "Live" page. JPEG (1 280 x 960): 11 fps About the "Live" page !2 Alarm occurrence indi- cation button !3
ملخص المحتوى في الصفحة رقم 6
1 t Image capture size buttons !0 [List] button * These buttons will be displayed only when a JPEG This button will become available only when "On" is image is displayed. selected for "Save logs" on the setup menu : The letters "VGA" will turn green and ( Setup Instructions). images in the main area will be displayed When this button is clicked, the log list will be dis- in VGA size. played and images saved on the SD memory card : The letters "QVGA" will turn green and can be played. images
ملخص المحتوى في الصفحة رقم 7
3 !8 Main area !6 Audio output button * Images from the camera will be displayed in this Turns on/off the audio transmission (play audio from area. the PC on the camera speaker). This button will be The current time and date will be displayed at the displayed only when "Audio output", "Interactive (full selected position in the time and date format set on duplex)" or "Interactive (half duplex)" is selected for the setup menu. ( Setup Instructions). "Audio mode" on the setup menu. ( Setup Click
ملخص المحتوى في الصفحة رقم 8
Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras) can be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can be registered as a group and up to 4 groups (16 cameras) can be registered. ( Setup Instructions) Important: • When simultaneously displaying images from 16 cameras on a multi-screen, zooming images from the WV- NP304 and pa
ملخص المحتوى في الصفحة رقم 9
Record images on the SD memory card manually Images displayed on the "Live" page can be recorded on the SD memory card manually. This button is operable only when "Manual" is selected for "Save trigger" on the setup menu. ( Setup Instructions) Images recorded on the SD memory card can be copied onto the PC. ( Setup Instructions) Step 1 Step 4 Display the "Live" page. ( page 4) Click the [Stop] button to stop saving images on the SD memory card. Step 5 Click the [Close] button to close the win
ملخص المحتوى في الصفحة رقم 10
Action at an alarm occurrence The alarm action will be performed when the following alarms occur. Alarm type Terminal alarm: When connecting an alarm device such as a sensor to the EXT I/O connector on the of the camera, the alarm action (camera action at an alarm occurrence) will be performed when the connected alarm device is activated. VMD alarm: When motion is detected in the set VMD area, the alarm action will be performed. * VMD stands for "Video Motion Detection". Command alarm: When a Pa
ملخص المحتوى في الصفحة رقم 11
Transmit images onto an FTP server Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available. Important: • When using this function, set the user name and the password to access the FTP server to restrict users who can log into the FTP server. • To transmit images to the FTP server, select "Not use" for "SD memory card", or select "FTP error"
ملخص المحتوى في الصفحة رقم 12
Save images on the SD memory card when images fail to transmit using the FTP periodic transmission function Images that have failed to transmit using the FTP periodic transmission can be saved automatically on the SD mem- ory card. Images saved on the SD memory card can be obtained from the [SD memory card] tab of the "Basic" page. ( Setup Instructions) To use the SD memory recording function featured in Panasonic’s network disk recorder, select "Off" for "FTP peri- odic transmission" ( Setup
ملخص المحتوى في الصفحة رقم 13
Display the log list The following logs can be displayed in list form. • Alarm log: Logs of the alarm occurrences such as time and date of the alarm occurrences and the alarm type will be displayed. • Manual log: Logs filed when images have been recorded on the SD memory card will be displayed. • FTP trans. error log: Logs filed when the FTP periodic transmission function has failed will be displayed. Each log list can be displayed only when "On" is selected for "Save logs" on the [Log] tab of
ملخص المحتوى في الصفحة رقم 14
[Time & date] Log list displayed in the log list win- Time and date when each log has been filed will be dis- dow played. [Number of the listed logs] Notes: Total number of the logs of the selected log type and a • When "Off" is selected for "Time display format" number of the log being displayed on the top of the log ( Setup Instructions), time and date of alarm list will be displayed. occurrence will be displayed in 24-hour format. • Alarm log: Alarm occurrence time and date will be Note: fi
ملخص المحتوى في الصفحة رقم 15
[Download] button Click this button to download all logs of the selected log list as a file onto the PC. [Close] button Click this button to close the log list window. 15
ملخص المحتوى في الصفحة رقم 16
Playback of images saved on the SD memory card When clicking a time and date listed on the log list window, the "Live" page will turn to the "Playback" page. When images associated with the clicked time and date are on the SD memory card, the first image of them will be displayed. Important: • Refresh interval of images may become slow during playback or download. • When many images are saved on the SD memory card, it may take time to display images on the "Playback" page. • Even when the size o
ملخص المحتوى في الصفحة رقم 17
[STOP] button [Download] button Playback will stop and the "Playback" window will turn to The selected image will be downloaded onto the PC. the "Live" page. Before downloading images, designate the destination directory in advance. ( Setup Instructions) [NEXT IMAGE] button The following window will be displayed when the The next frame will be displayed and paused when this [Download] button is clicked. button is clicked during playback. Each time this button is clicked during pausing, the fram
ملخص المحتوى في الصفحة رقم 18
About the network security of the camera Equipped security functions The following security functions are featured in this camera. q Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the camera by setting the host authentication and/or the user authentication to "On". ( Setup Instructions) w Access restrictions by changing the HTTP port It is possible to prevent illegal access such as port scanning, etc. by changing the HT
ملخص المحتوى في الصفحة رقم 19
Viewing Help If you want to know anything about operation or setup methods on screen, display the "Help" screen. Displaying the Help screen Setup screen Step 1 Click the [Setup] button. → The setup screen is displayed. Clicking an underlined item win display the "Help" pop-window. If is possible to configure the settings while displaying the "Help" pop-up window. Step 2 Click the [Help] button. → The "Help" screen is displayed. Help screen Step 3 Click the desired item to display a detailed expl
ملخص المحتوى في الصفحة رقم 20
Panasonic System Solutions Company, Panasonic Sales Company Division of Panasonic Puerto Rico Inc. Unit Company of Panasonic Corporation of North America San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 www.panasonic.com/business/ Carolina For customer support, call 1.800.528.6747 P.R. 00985(809)750-4300 Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Panasonic Canada Inc. 5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca © 2008 Matsushita El
