ملخص المحتوى في الصفحة رقم 1
Arbitrator-CP ver.1.9
Basic Operation
[For Officers]
ملخص المحتوى في الصفحة رقم 2
Arbitrator-CP Basic Operation for Officers -Contents- (1) Control Reference Guide Front Camera (AG-CK10P) P2 Recorder-VPU (AG-CPD15P) Control Panel (AG-RCP30P) Control Panel - User Friendly Design Digital Wireless Microphone (TDSS-900-PNA) (2-a) Control Panel Menu for Officer (for non LPR users) (2-b) Camera Menu for LPR (License Plate Recognition) (3) Record the video (Live Mode) (4) Playback the recorded video (Archive Mode) (5) Camera Control: (a) Zoom (b) Auto Zoom (c) IR Mode (6) Of
ملخص المحتوى في الصفحة رقم 3
(1) Control Reference Guide Front Camera (AG-CK10P) Rear panel LED Control Connector for VPU Backlight compensation to make it brighter T(TELE) for Zoom In W(WIDE) for Zoom Out Auto Zoom REC Start and STOP Camera Control *Keep pressing this button for more than 2 seconds will stop recording. SUN Shade REC LED Lights up in RED while recording
ملخص المحتوى في الصفحة رقم 4
(1) Control Reference Guide P2 Recorder - VPU (AG-CPD15P) Key Lock P2 card Locks and unlocks slot cover the P2 Card slot cover REC LED READY lamp REC STOP P2 card Lights up when button button recording is ready slot 1, 2 BUSY lamp Lights up or flashes while a P2 card is accessed.
ملخص المحتوى في الصفحة رقم 5
(1) Control Reference Guide Control Panel (AG-RCP30P) 1) Lock Lamp Book Auto LCD Lock except “REC”, “Menu”, Mark Zoom Screen “Control Panel ON/OFF”, “Return” Button while lights on 2) Ready Lamp Backlight 3) Busy Lamp Compensation Cursor Button T: Zoom In Return W: Zoom Out To go back to previous menu or setting Menu REC/STOP Lamp Skip (Back/Forward) REC Live/Archive Button Switching Button STOP Control Panel Button ON/OFF Audio 2 Mute IR Mode Camera Volume Brightness (Auto/ON/OFF) Butt
ملخص المحتوى في الصفحة رقم 6
(1) Control Reference Guide Control Panel (AG-RCP30P) - User Friendly Design Admin/Archive Control Mode Buttons Live Control Mode Buttons 1. High Priority Buttons for Live Control Mode on the left side for easy access High Priority Buttons REC, STOP, Zoom in/out, Bookmark Auto Zoom, Backlight compensation 2. The Same REC/STOP Button Size as that of VPU (P2 Recorder) for easy recognition 3. Large Button Size and Space between buttons for Users
ملخص المحتوى في الصفحة رقم 7
(1) Control Reference Guide Digital Wireless Microphone TX and RX (TDSS-900-PNA) Transmitter (TX) With Receiver (RX) Transmitter (TX) Beep Tone Lavalier Mic Input Talk Button: Built-in Mic Press for REC Mute Button Mode Selection Button Talk ON : Green LED BATT : Red-In charging, Green-Fully charged Regarding Mode and Indication of LED Buttons, there are 3 different versions of TX as below serial numbers. Version Serial Number Version 1.0 070601609 to 071103658 Version 1.5.2 071103659 to 0711
ملخص المحتوى في الصفحة رقم 8
(1) Control Reference Guide Version 1.0: Digital Wireless Microphone TX Indication of LED BUTTON: TDSS-900 TX Version 1.0 Serial No: 070601609 to 071103658 Low Mode Talk REC Out of Mute Push Battery Push Range Off On Mode button Talk button Mute button BEEP Blue Blue Red Red Red on blink on blink fast off blink Vibration Blue Blue Red Red Red off off on blink fast off blink B+V Blue Blue Red Red Red on blink on blink fast off blink No Blue Blue Red Red Red Indic
ملخص المحتوى في الصفحة رقم 9
(1) Control Reference Guide Version 1.5.2: Digital Wireless Microphone TX Indication of LED BUTTON: TDSS-900 TX Version 1.5.2 Serial No: 071103659 to 071104658 Mode Talk REC Low Out of range Mute Button Push Battery Push OFF ON Mode button Talk button Mode 1 Blue Blue Blue Blue LED OFF Blue LED BEEP OFF ON Blink Fast OFF Blink Slow Beep ON Mode 2 Blue Blue Blue OFF Blue LED OFF Blue LED Vibration Vibr ON OFF OFF OFF OFF Mode 3 Blu
ملخص المحتوى في الصفحة رقم 10
(1) Control Reference Guide Version 1.5.3: Digital Wireless Microphone TX Indication of LED BUTTON: TDSS-900 TX Version 1.5.3 Serial No: 071104659 and above Low Mode Talk REC Out of Mute Battery Push Push range Off On Mode Mode button Talk button Talk button Mute button button Vibration Blue Blue Red Red Red Red/Blue Blink on blink on Blink off (Mute/Talk button) No Blue Blue Red Red Red Vibration off off off off off 1. LED ON: this mode as initial when Power on 2. After synchron
ملخص المحتوى في الصفحة رقم 11
(2-a) Control Panel Menu for Officer [Camera] For users who do not use LPR (License Plate Recognition mode) [Top Menu] (“Init LPR Mode” in Admin set up is “Disable” as a factory default.) *For LPR users, please go to ”Camera Menu for LPR” for details Re-Auto Focusing Adjust manual focus Adjust image brightness [Audio] 1. “IN CAR” for In car Mic (Mic in) 2. “WMIC” for 2nd Wireless Mic (Audio 2 in) 3. “LINKCAM” to change the Audio 1 or 2 by linking with the camera changes, *Audio 1 for Wirel
ملخص المحتوى في الصفحة رقم 12
(2-b) Camera Menu for LPR (License Plate Recognition) In order to use LPR (License Plate Recognition) mode, the Administrator needs to set up “Init LPR Mode” as “Enable” in Admin/Camera menu. *If setting up “Init LPR Mode” as “Disable”, there will be no “LPR Mode”, “LPR/Patrol Shutter Speed”, “LPR/Patrol Zoom” on screen as shown below. (Just “Auto Focus”, “Manual Focus” or “AE” can be selectable and changed in “Camera” menu.) [Camera] [Top Menu] while recording is 2) [LPR Mode] is set to “P
ملخص المحتوى في الصفحة رقم 13
(3) Record the video (Live Mode) Press REC button for (1) Control Panel, (2) Camera (Rear Panel), or (3) VPU (P2 Recorder) *If the trigger is set, VPU will start recording automatically when the trigger is on.
ملخص المحتوى في الصفحة رقم 14
(4) Playback the recorded video (Archive Mode) (a) Press “Live/Archive” button of Control Panel to playback the video. (Playback starts from the location where playback was last made. Or if the recording was started or stopped prior to pressing “Live/Archive” button, playback starts from the beginning of the file.) Or (b) Press “Menu” of Control Panel and go to “Archive”. (b) (a) [Live mode] [Archive mode]
ملخص المحتوى في الصفحة رقم 15
(5) Camera Control (a) Zoom “W”: Zoom Out “T”: Zoom In (b) Auto Zoom Press “Auto Zoom” button of Control Panel or Camera. (c) IR Mode Press “IR Mode” button switching to IR “Auto”, “On”, “Off” Auto Zoom W: Zoom Out T: Zoom In IR Mode
ملخص المحتوى في الصفحة رقم 16
(6) Officer Information Register at the beginning of shift & delete at the end of shift (A) Register the Officers information (At the beginning of shift) (1) “Auto”: Plug USB memory (saved the officer information) to VPU. (2) “Manual”: Plug USB memory to VPU and press “Load” button. If 2 officers need to be loaded, plug 2 different USB memories to VPU. (3) “List”: Press “Select” button in “Officer” by Control Panel menu. (B) Delete the Officer information (At the end of shift) “Manual”, “Lis
ملخص المحتوى في الصفحة رقم 17
Arbitrator-CP ver.1.9 Basic Set up & Operation [For Administrators]
ملخص المحتوى في الصفحة رقم 18
Arbitrator-CP Basic Set up & Operation for Administrator -Contents- (1) -Before Use, Format 16GB P2 Card -16GB P2 Card Format by Products / Combination with Windows version (2) Control Panel Menu for Administrator (3) REC/Play Set up by Administrator (4) Camera Control - Auto Zoom / IR Set up by Administrator (5) Control Panel Key Lock (6) On Screen Type set up by Officer / OSD set up by Administrator (6-a) Live Mode On Screen Type (6-b) Archive Mode On Screen Type (7) Trigger (a) Set up by Adm
ملخص المحتوى في الصفحة رقم 19
(1) Before use, Format 16G P2 card Formatting 16G P2 card is mandatory at the first time usage. When modified (copy, delete, move etc) folders in P2 Card, please format the card. (If you copy the folders/files from 5 slot P2 drive or PC PCMCIA to PC HDD, please format the card.) The format of 16G P2 card is available by Control Panel, 5 slot P2 drive and PC PCMCIA slot. Note that 16GB P2 card limit the number of files that can be recorded per below chart. # of # of maximum recording files
ملخص المحتوى في الصفحة رقم 20
(1) 16GB P2 Card Format by Products / Combination with Windows version Format by How to format? SI By SI Menu, go to “Config”-”Operations”-”Format”. (FE Application) Control Panel By Control Panel Menu, go to “Setup Info”-”Admin”-”File Management”- ”Format” Before format, install the P2 driver (from “P2 ICV Filter w/ P2 Drivers” CD included in PC PCMCIA slot Arbitrator kit) to PC. Then, select the removable disc drive in PC that inserted P2 card. (Windows) Right click on that drive and sele
