Olympus Digital Vision 200015-1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

* This step follows the software installation process.
Macintosh Setup:
1) Close the lens barrier cover on the camera.
2) Connect the long communication cable and the short communication cable together.
3) Connect one end of the communication cable to the computer’s available serial port.
4) Connect the other end of the communication cable to the RS-232 connector on the camera
(located under the side rubber cover on the camera).
5) Connect the optional A/C adap

ملخص المحتوى في الصفحة رقم 2

This step follows the software installation process. Windows 3.1x, 95, and NT Setup: 1) Close the lens barrier cover on the camera. 2) Connect one end of the long communication cable to your computer (this may be labeled Serial Port 1 or Serial Port 2 on the rear panel of your P.C.). 3) Connect the other end of the communication cable to the RS-232 connector on the camera (the RS-232 connector is located under the rubber side cover on the camera). 4) Connect the op