Nikon AUTOFOCUS SB-28D دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

When using the flash off-camera
with a dedicated sync cord:
NIKON Autofocus
5 Aim the flash directly at the
SB-28D and SB-28DX
subject.
Speedlight
Aiming the flash incorrectly can
cause over- or under-exposure.
Using with your
6
Be careful not to cover the sensor KODAK PROFESSIONAL
on the Speedlight.
DCS 600 Series Camera
This can produce unexpected
results.
Refer to the DCS 600 Series User’s
Manual (included on the documen-
tation CD), or the SB-28 instruction
manual (included with your
Speedli

ملخص المحتوى في الصفحة رقم 2

General guidelines for using the TTL auto flash is NOT SB-28D/SB-28DX Speedlight with recommended. your DCS 600 Series camera: 3 The automatic exposure control 1 Use the Sub-Command dial, not range of the SB-28DX Speedlight the lens aperture ring, to set is partially determined by the aperture. selected ISO speed on the camera. Closer subjects may require lower ISO settings. The following table specifies the widest aperture recommended for each camera’s minimum ISO: Minimum Maximum ISO Aperture