Xerox C424 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

WorkCentre® C2424 Copier-Printer
User Safety
Your system and the recommended supplies have been designed and tested to meet strict safety
requirements. Attention to the following information will ensure the continued safe operation
of your system.
Electrical Safety
■ Use the power cord supplied with your system.
■ Plug the power cord directly into a properly grounded electrical outlet. If you do not know
if an outlet is grounded, ask an electrician to check the outlet.
■ Do not use a ground

ملخص المحتوى في الصفحة رقم 2

The power cord is attached to the system as a plug-in device on the side of the system. If it is necessary to disconnect all electrical power from the system, disconnect the power cord from the electrical outlet. Warning Do not remove the covers or guards that are fastened with screws unless you are installing optional equipment and are specifically instructed to do so. Power should be OFF when performing these installations. Disconnect the power cord when removing covers and guards for ins

ملخص المحتوى في الصفحة رقم 3

■ Follow all warnings and instructions marked on, or supplied with, the system, options and supplies. Caution Use of other than Genuine Xerox WorkCentre C2424 Solid Ink may affect print and copy quality and system reliability. It is the only ink designed and manufactured under strict quality controls by Xerox for specific use with this system. The Xerox Warranty, Service Agreements, and Total Satisfaction Guarantee do not cover damage, malfunction, or degradation of performance caused by us

ملخص المحتوى في الصفحة رقم 4

Moving the System Caution Parts of the system are hot. To avoid personal injury or damage to the system, allow the ink to solidify. Run the shut-down procedure to cool the system quickly. Wait at least 30 minutes for the system to cool completely before moving or packing it. ■ Always allow the system to cool before it is moved to avoid ink spills which can damage the system. ■ Use the shut-down procedure at the control panel (Shut Down for Moving System) for best results. ■ Never move the sy

ملخص المحتوى في الصفحة رقم 5

■ The system is heavy and must be lifted by two people. The illustration below shows the proper technique for lifting the system. 42 kg 93 lbs. 2424-109 ■ Always move the system separately from optional Trays 3 and 4. When shipping the system, repack the system using the original packing material and boxes or a Xerox repackaging kit. Additional instructions for repacking the system are provided in the repackaging kit. If you do not have all the original packaging, or are unable to repackage t

ملخص المحتوى في الصفحة رقم 6

Symbols Marked on the System Danger, high voltage. Use caution (or draws attention to a particular component). See the manual(s) for information. Avoid pinching fingers in the system. Use caution to avoid personal injury. Keep hands clear to avoid personal injury. Hot surface on or in the system. Use caution to avoid personal injury. WorkCentre® C2424 Copier-Printer A-6