Canon 300D DIGITAL REBEL AND DIGITAL REBEL 350D XT دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

ExpoDisc White and Warm Balance Filters
Canon Custom WB Procedures

Canon 300D Digital Rebel and Digital Rebel 350D XT

1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes, or set the correct manual exposure in “M” mode.
3. Aim the camera in the appropriate direction for the given lighting condition and
press the shutter release button. See the ExpoDisc Instruction manual for more
information

ملخص المحتوى في الصفحة رقم 2

3. Aim the camera in the appropriate direction for the given lighting condition and press the shutter release button. See the ExpoDisc Instruction manual for more information on where to aim the camera. 4. Push the ‘MENU’ button. 5. Scroll down to ‘CUSTOM WB’ in the menu using the thumb dial, then push the ‘SET’ button in the center of the thumb dial. 6. Push the ‘SET’ button again to select the ExpoDisc ‘gray frame’ just taken. 7. Push the ‘MENU’ button to exit menu. 8. Push and hold th

ملخص المحتوى في الصفحة رقم 3

press the shutter release button. See the ExpoDisc Instruction manual for more information on where to aim the camera. 5. Press the menu button to access menu system. 6. Press and hold the ‘select’ button and rotate the thumb dial to access the ‘camera recording sub menu’ , then release the ‘select’ button. 7. Press and hold the ‘select’ button and scroll down to ‘custom WB’ then release the ‘select’ button. 8. Press and hold the ‘select’ button and rotate the thumb dial to s