ملخص المحتوى في الصفحة رقم 1
Model 119937
Model 119835 Model 119907
Lit. #: 98- 1110/02-08
Trail Scout 2008 Models 119835+11 1 3/4/08 12:05:25 AM
ملخص المحتوى في الصفحة رقم 2
Trail Scout 2008 Models 119835+12 2 3/4/08 12:05:25 AM
ملخص المحتوى في الصفحة رقم 3
Congratulations on your purchase of the Bushnell® Digital t rail Scout™ Camera! This trail camera is designed to record the activity of wildlife game in the outdoors with its still image and movie modes and weatherproof, rugged construction. This instruction manual is designed to maximize your understanding of how the camera operates. Bushnell Digital Trail Scout Features (All Models) One of the most revolutionary advances in scouting technology to date, the Bushnell Digital trail Scout del
ملخص المحتوى في الصفحة رقم 4
DIGITAL TRAIL SCOUT MODELS 119835—Trail Scout 5.0MP Great images and scouting technology at a great value. This camera will sense deer and other game as far out as 45 feet with its passive infrared sensor. Low-battery indicator lights when battery life drops below 25%. Motion LED lights when activity is detected by the sensor in regular imaging mode and during setup mode for aiming. Weatherproof. Video Movie mode with audio. Selectable Lo/Med/Hi Resolution (2MP/3MP/ 5MP*). Date/time/Moon Pha
ملخص المحتوى في الصفحة رقم 5
DIGITAL TRAIL SCOUT SpECIFICATIOnS image Sensor 1/2” CMOS sensor with 3.0 million (119835) or 5.0 million pixels (119907/119937). “Hi” res setting captures images with 5MP (119835) or 7MP (119937/119907) resolution via software processing Lens F/3.5, effective focal length 42mm. Sight range: 45 degrees Flash High power electronic Xenon Flash or infrared 24-lamp LED array. Range: 45 ft. PiR Sensor Low noise, high sensitivity passive infrared sensor. Range: 45 ft Motion LED indicator Yes Disp
ملخص المحتوى في الصفحة رقم 6
infrared 119937/119907 119835 LED Array Camera Standard Flash Flash Lens Camera Laser PiR PiR Lens Pointer Motion Keylock Keylock Motion LED LED SD Card SD Card Low Slot Low Slot Battery Battery LED Game Call LED Volume Parts Guide Trail Scout 2008 Models 119835+16 6 3/4/08 12:05:26 AM
ملخص المحتوى في الصفحة رقم 7
Switch Position/Setting Switch and Setup Description Switch #/Function UP CENTER DOWN 1198 Control Panel K1 (Operating On Setup Off Mode) K2 (image Mode) Still - Movie Up/Down/Enter Med (3MP) K3 (Resolution)* Hi (5MP) Lo (2MP) K4 (Camera Delay) 2 minutes 1 minute 30 seconds K1 K2 K3 K4 Switch Position/Setting Switch #/Function UP CENTER DOWN 1199/11990 Control Panel K1 (Operating On Setup Off Mode) K2 (image Mode) Still - Movie K3 (Flash Mode) LED - Standard Up/Down/
ملخص المحتوى في الصفحة رقم 8
SETUp GUIDE NOTE (Models 119937/119907 Only) : THE LASER POINTER IS ACTIVATED IN THE SET- UP MODE. DO NOT PERMIT THE LASER POINTER TO BE DIRECTED TOWARD ANYONE’S EYES, TO AVOID POTENTIAL EYE INJURY. Before beginning the setup, insert 4 “D” size alkaline batteries as indicated inside the battery compartment. If you will be using the optional solar panel accessory, be sure to use rechargeable NiMh batteries only. 1. K1 - Mode Switch (OFF / SETUP/ ON) : a) Power ON (UP position): Set K1 to
ملخص المحتوى في الصفحة رقم 9
Setup Guide (cont.) (1) SET DATE: When the LCD shows Set Date, press the ENtER key to modify the date. Press Up or Down button to select 1-12 then press the ENtER button to Set Date confirm the two digit month. The cursor will then move to the day. Press Up or Down button to select 1-31 then press ENtER to confirm the two 09/18/04 digit day. Then the cursor will move to the year. Press Up or Down button to select 0-99,then press ENtER to confirm the two digit year. From Set Date,
ملخص المحتوى في الصفحة رقم 10
Setup Guide (cont.) (4) SET PASSWORD (cont.): The LCD will show [Password Yes]. t o change the password, press Enter. Password if you do not want to set a password, you can press the Up or Down key to select NO. Yes if you selected YES, the LCD shows [New Pswd]. Press the Up or Down key to select the first password digit of 0-9. Press ENtER to confirm, the cursor will move to the next digit New Pswd to the right. Repeat the process using UP, Down and Enter keys to enter your four digit passw
ملخص المحتوى في الصفحة رقم 11
Setup Guide (cont.) (6) SELECT SOUND (119907/119937 only): When the LCD shows SOUND, press the ENtER key to select from the list of 8 different game calls (note that the game call module must be installed for the sound to be audible-see “Attaching the Game Call Module” near Sound the end of this manual). Press the Up or Down button to find the desired game call, then Off press the ENtER button to confirm the call selection. See “Using the t rail Scout” towards the back of this manual for
ملخص المحتوى في الصفحة رقم 12
2. K2 – Image Mode Switch (STILL / MOVIE): Setup Guide (cont.) Set K2 to either of these settings: (UP) STILL Photo Mode: image resolution is determined by the setting of the RES switch, and photos are stored in JPG format. (DOWN) MOVIE Mode: The camera can record a 15 second movie, the file format is AVi with audio. NOTE: On model# 119835, using MOVIE mode at night will result in dark videos, as the xenon (standard) flash does not function in MOVIE mode. With models 119937/11
ملخص المحتوى في الصفحة رقم 13
Setup Guide (cont.) 4. K3 (Model 119835) – (Hi/Med/Lo) RESOLUTION: K4 (Model 119937/119907)– (Hi/Med/Lo) RESOLUTION: The t rail Scout has three still photo resolution options: (a) Hi: Still photos are taken at the highest (interpolated) resolution setting, 5MP (119835) or 7MP (119937/119907). Use this setting if you plan to make large prints from your photos, or anytime photo quality is a higher priority than photo storage space (higher resolution photos generate larger size fi
ملخص المحتوى في الصفحة رقم 14
GLOSSARy PIR—Passive infrared Sensor. Senses motion like typical security motion detector. Requires infrared energy (heat) in addition to motion to trip sensor to assure detection of live animals. Event—Any time that the PiR senses motion it counts it as an event. Events are recorded to the SD card in a text file. Events are recorded continuously during operation. Image—A digital picture recorded on the SD Card when motion is sensed. images are taken at the desired delay between im- ages.
ملخص المحتوى في الصفحة رقم 15
OThER SETUp nOTES 1. SD CARD SLOT The unit has a standard SD Card slot. You must push the SD Card in with the SD Card label facing the Bushnell logo into the SD card slot. Pushing it again will release the SD card, and then you can remove the SD card from the SD card slot. insertion or removal of SD card is only recommended when the unit is in the “OFF” position, as data can be lost or files corrupted if a card is removed while storage is in progress with the unit powered on. 2. PIR SENSOR
ملخص المحتوى في الصفحة رقم 16
Other Setup Notes (cont.) 3. LASER POINTER (Models 119937/119907 Only) The 119937/119907 t rail Scout camera has a Laser pointer. When you mount the unit on a tree or any other fixed surface and cannot sight from behind the Game Camera, you can use the Laser Pointer to align the unit. NOTE: LASER LIGHT IS POTENTIALLY DANGEROUS TO THE EYES. THE LASER POINTER IS ACTIVATED IN THE SET-UP MODE. DO NOT PERMIT THE LASER POINTER TO BE DIRECTED TOWARD ANYONE’S EYES TO AVOID POTENTIAL EYE INJURY. 4.
ملخص المحتوى في الصفحة رقم 17
Other Setup Notes (cont.) Flash Day Time Photo Results Night Time Photo Results Recommended Mode Combination LED Normal, may be dark during Black & White, good Good (Better night results, cloudy conditions or late hours exposure flash is undetected) StD Normal color & exposure Slight pink or reddish color Good (Better day results) Note: setting the date and time on your camera is imperative for the unit to function properly, so that images captured by both day and night will have the best pos
ملخص المحتوى في الصفحة رقم 18
ABOUT ThE InCLUDED MOUnTIn G BRACKETS Trail Scout Ratcheting Bracket Installation Tips A total of brackets are included with all new Trail Scouts (Model#s 1198/11990/1199): (1) “T” bracket that mounts to the back of the camera (1) Ratcheting bracket (see photo) (2) Tree brackets. The two tree brackets are intended to allow the user to attach brackets to trees in two different locations, making it easier to move a single camera between the two positions. The ratcheting bracket (origi
ملخص المحتوى في الصفحة رقم 19
USInG ThE DIGITAL TRAIL SCOUT 1. MOUNTING (Using the “T” bracket and a standard tree bracket): Mount the trail camera on the tree as shown below. 1. Screw bracket A to the tree. 2. Bolt bracket B on the back of the trail camera. 3. Match bracket B up to bracket A. 4. Then, hang bracket B over bracket A. 5. Finally, insert the padlock and lock when setup is completed. B For extra security, you can use the included cable to wrap around the tree trunk as well. 1. insert the e
ملخص المحتوى في الصفحة رقم 20
Using the Trail Scout (cont.) 2. POWER ON AND SETUP SWITCH SUMMARY: t urn the knob 90°counterclockwise and open the front cover. Set the K1 to ON position, input correct Password. Default password is “0000”. (if the password is entered incorrectly 3 times, the unit will be powered off automatically. if you want to power ON again you must set K1 back to OFF and then set K1 to ON) The LCD will display current iMAGE&EVENt counter. You can press the Up or Down key to see the DAtE, tiM
