ملخص المحتوى في الصفحة رقم 1
SALES NETWORK
• •
SAMSUNG TECHWIN CO., LTD. SAMSUNG OPTO-ELECTRONICS UK, LTD. 1/2¨ Ultra Low Light Color Camera
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Samsung House, 1000 Hillswood Drive, Hillswood Business
Gyeonggi-do 462-703, Korea Park Chertsey, Surrey KT16 OPS
INSTRUCTION MANUAL
TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145 TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
• SAMSUNG OPTO-ELECTRONICS AMERICA,INC. • TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
ELECTRONIC IMAGI
ملخص المحتوى في الصفحة رقم 2
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. INFORMATION -Th
ملخص المحتوى في الصفحة رقم 3
Features Warning The camera needs periodic inspection. Fine Picture in Ultra Low Day & Night illumination. Contact an authorized technician for inspection. The camera provides automatic mode change SV-III built-in DSP and 1/2 inch CCD allows over by sensing day or night conditions. It bright and high quality images to be captured Stop using your camera when you find a malfunction. can change color mode in the day condition in ultra low light condition. If you use your camera around smoke or unus
ملخص المحتوى في الصفحة رقم 4
Contents 8 21 Precautions Operating Your Camera Configuration of The Menu 21 Composition 10 Setting Up The Menu 22 • CAMERA ID 23 • BACKLIGHT 26 Name and Function of Each Part 11 • WHITE BALANCE 27 Front 11 • MOTION DETECTION 28 12 Side • LENS SELECTION 30 Bottom 13 • SHUTTER SPEED CONTROL 32 Back 14 • AGC 34 • SENS-UP 35 • SSNR 36 15 Connection 37 • SPECIAL Lens 15 • Installing Auto Iris Lens 40 Using Reomte Jack / MD Output / D&N Input • Installing C/CS-Mount Lens 42 Troubleshooting Connecting
ملخص المحتوى في الصفحة رقم 5
Precautions Do not install the camera in Do not install or use the camera in an Do not drop the camera or subject Never keep the camera face to extreme temperature conditions. environment where the humidity is high. them to physical shocks. strong light directly. Only use the camera under conditions It can cause the image quality to be poor. It can cause malfunctions to occur. It can damage the CCD. where temperatures are between -10˚C and +50˚C. Be especially careful to provide ventilation when
ملخص المحتوى في الصفحة رقم 6
Composition Name and Function of Each Section Front 1.SHC-740 C-Mount Lens Adapter Used to attach C-mount lens. Tripod Mounting Bracket Screw Hole Used to fix the Tripod mounting bracket on the top of the camera. 2. Auto Iris Lens Plug 3. Remote Plug 4. C-Mount Adapter 5. Instruction Manual Back Focus Adjustment Lever Used to adjust back focal length COLOR CCD CAMERA User’s Manual COLOR CCD CAMERA User’s Manual 10 11
ملخص المحتوى في الصفحة رقم 7
Name and Function of Each Section Side Bottom BACK FOCUS ADJUSTMENT LEVER Tripod Mounting Hole When you don’t obtain focused point after adjusting lens focus, Used to install the camera on an optional adjust the lever. tripod. The tripod must be equipped with the screw specified as shown below. Auto Iris Lens Connector Used to connect Auto Iris Lens plug. 1/4"-20 UNC (20 THREAD) L DC/VIDEO Selection Switch L:4.5mm±0.2mm (ISO standard), Used to choose DC or VIDEO according to the or 0.197" (AS
ملخص المحتوى في الصفحة رقم 8
Name and Function of Each Section Connection LENS Back The lens is not supplied with this camera. Purchase a lens suitable for your Video Output Jack Power LED environment. This camera accepts the auto iris lens and both C-and Used to connect an external The LED turns on CS-mount lens. video monitor in jack. when power is supplied. Notes Remote Jack If the lens is marked with fingerprints or other marks, the image quality might be poor. It is recommended to use a high quality lens to improve
ملخص المحتوى في الصفحة رقم 9
Connection 3. Remove the cover from the iris lens plug supplied, and solder the lens Installing C/CS-Mount lens cable to the plug as shown below. Before mounting a lens, please check whether it is a C-mount or CS-mount lens. • Video type : • DC type : No. 1 Pin --- Red (Power source) No. 1 Pin --- Damping - The back focus is set for the CS-mount lens at the factory. No. 2 Pin --- N.C No. 2 Pin --- Damping + • Mounting a CS-Mount lens No. 3 Pin --- White (Video signal) No. 3 Pin --- Drive +
ملخص المحتوى في الصفحة رقم 10
Connection • Mounting a C-Mount lens Connecting to Monitor 1. Attach the C-Mount lens adapter by turning clockwise. Connect the VIDEO Out jack to the monitor VIDEO In jack. CCD Camera Monitor • As the connecting method varies with the instruments, refer to the manual supplied with the instrument. • Only connect the cable when the power is turned off. 2. Attach the lens to the camera by turning clockwise. • Set the 75Ω/Hi-Z selection switch as shown below if you have an intermediate device. Inter
ملخص المحتوى في الصفحة رقم 11
Connection Operating Your Camera Connecting to Power Configuration of The Menu Each model has different power specification. Please check the name of the SETUP MENU CAMERA ID model and power specification before connecting to power source. • OFF • ON BACKLIGHT For AC / DC Power Type • WDR • OFF • The wire is polarized. Be sure to connect the wire that white line is on covering WHITE BAL. to ‘-’ terminal and connect the other one to ‘+’ terminal. • ATW • AWC • MANUAL • Use AC 24V/500mA or DC 12V
ملخص المحتوى في الصفحة رقم 12
Operating Your Camera SETUP Setting Up The Menu CAMERA ID OFF Change the status using Select the function using the UP or DOWN button. BACKLIGHT WDR the LEFT or RIGHT button. Use the five Setup Menu buttons on side of the camera. WHITE BAL. ATW MOTION DET. OFF LENS DC SHUTTER ESC AGC HIGH SENS-UP AUTO SSNR MIDDLE SPECIAL UP button EXIT LEFT button SET button 3. Change the status of the selected feature using the LEFT or RIGHT button. 4. When completed, move the arrow indicator to 'EXIT' and
ملخص المحتوى في الصفحة رقم 13
Operating Your Camera 3. Press SET button. 5. Select the position at which the camera ID will be located on the screen. Move the cursor to 'Pos' and press SET button. Camera ID ABCDEFGHIJKLM Camera ID NOPQRSTUVWXYZ ABCDEFGHIJKLM abcdefghijklm NOPQRSTUVWXYZ nopqrstuvwxyz abcdefghijklm -. 123456789 nopqrstuvwxyz CLR POS END -. 123456789 CLR POS END 4. You can enter up to 15 characters. The camera ID is displayed on the top-left of the monitor screen. (Default Move the cursor to character-enter l
ملخص المحتوى في الصفحة رقم 14
Operating Your Camera Notes Backlight • If you select manual in ‘shutter’ menu, you can’t use WDR mode. The built-in SVIII DSP chip provides intelligent light level control to overcome • If you select WDR mode, the following phenomenon may appear by lighting the severe Backlight conditions. condition. In these cases do not select WDR mode. 1. Press the SET button to display the setup menu and move the arrow Noise of bright part on the screen indicator to ‘Backlight’ using the UP or DOWN button.
ملخص المحتوى في الصفحة رقم 15
Operating Your Camera AWC(Auto White balance Control): The white balance is automatically adjusted 2. Set ‘Motion Det.’ to the ON mode using LEFT or RIGHT button. in a specific environment. In order to obtain the best result, press the SET button while SETUP the camera focuses on white paper. If the environment including the light source is CAMERA ID OFF changed, you have to adjust the white balance again. BACKLIGHT WDR WHITE BAL. ATW Manual: To fine adjust, select the Manual mode. You can incr
ملخص المحتوى في الصفحة رقم 16
Operating Your Camera · When completed, press END button. DC / Video: When using auto iris lens Notes SETUP CAMERA ID OFF Tips on Using the Motion Detection Feature BACKLIGHT WDR WHITE BAL. ATW • After selecting zone and sensitivity, perform a test operation to make sure it MOTION DET. OFF works properly. LENS DC • If the lighting flickers, the motion detection feature might not work properly. SHUTTER ESC • The object should occupy 10% or more of its zone. The bigger the object, the higher sensi
ملخص المحتوى في الصفحة رقم 17
Operating Your Camera • You can select speed from ‘1/60’ to ‘1/100,000’sec (NTSC Models), ‘1/50’ Notes to ‘1/100,000’sec (PAL Models). • When the auto iris lens is mounted, you have to set the DC/Video selection * It is possible to adjust Sens-Up(x2 ~ x128) mode manually. switch on the side of the camera properly according to the type of the lens. The • When the shutter speed is increased or decreased using the LEFT or RIGHT setup window displays DC or Video according to status of this selection
ملخص المحتوى في الصفحة رقم 18
Operating Your Camera AGC (Auto Gain Control) SENS-UP To get brighter picture. You can always get the clear image with this function under night or low- lighting level. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘GAIN’ using the UP or DOWN button. 1. Press the SET button to display the setup menu and move the arrow indicator to 'Sens-up' using the UP or DOWN button. 2. Set ‘gain’ to desired mode using the LEFT or RIGHT mode. 2. Set ‘Sens-up’ to the desire
ملخص المحتوى في الصفحة رقم 19
Operating Your Camera SSNR(Samsung Super Noise Reduction) SPECIAL To reduce the noise on the screen. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘SSNR’ using the UP or DOWN button. 2. Set ‘SSNR’ to desired mode using the LEFT or RIGHT mode. LOW: low reduction of the noise MIDDLE: middle reduction of the noise HIGH: high reduction of the noise OFF: Deactivation 1. Press the SET button to display the setup menu and move the arrow indicator to ‘SPECIAL’ usin
ملخص المحتوى في الصفحة رقم 20
Operating Your Camera PRIVACY: To mask area which you want to mask Notes - OFF: Deactivation • When you use Auto Iris Lens with Video type, do not set the level on the lens to too - ON: Privacy mode activated low, Color/BW may not change over automatically. · Press the SET button. • When Gain in SET UP menu is OFF, Color / BW do not change over automatically. • If AGC is OFF, you can’t select AUTO mode on DAY/NIGHT menu. • For the stable operation, whenever the mode is changed over between color
