ملخص المحتوى في الصفحة رقم 1
Contents
Safety precautions 2
COLOR TELEVISION
Preparation 3
...
1 Confirm which remote control you have 3
INSTRUCTIONS
...
2 Insert the batteries into the remote control 3
.............
3 Connecting the antenna and VCR 4
Thank you for buying this JVC
4 Connecting other devices .......................... 5
color television.
...
5 Connect the power cord to the AC outlet 5
To make sure you understand how to
...............................................
6 Initial setting 6
use your new TV, please
ملخص المحتوى في الصفحة رقم 2
Safety precautions WARNING • To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION • Operate only from the power source indicated on the rear of the TV. • Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. • Never block or cover the cabinet openings for ventilation. Never install the TV where good ventilation is unattainable. When 15 cm installing this TV, leave spaces for ventilation ar
ملخص المحتوى في الصفحة رقم 3
Preparation 1 Confirm which remote control you have Your TV comes with one of the two remote controls shown below. Functions you can operate differ depending on the type of remote control. POWER MUTING POWER MUTING COLOR CINEMA COLOR CINEMA SYSTEM BASS SURROUND SYSTEM SURROUND ECO ECO SENSOR DISPLAY SENSOR DISPLAY MENU MENU CLOSED CLOSED CAPTION CAPTION TV/VIDEO TV/VIDEO 123 123 OFF OFF TIMER TIMER 456 456 PICTURE PICTURE MODE MODE 789 789 CHANNEL CHANNEL RETURN+ 100+ RETUR
ملخص المحتوى في الصفحة رقم 4
Preparation 3 Connecting the antenna and VCR • Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method. • Turn off all the devices including the TV. • Connecting cables are not supplied. • When connecting monaural audio to the TV, use the L/MONO jack. Connecting the antenna VHF/UHF outdoor antenna COMPONENT VIDEO-1 (VIDEO-2) OUTPUT INPUT INPUT V Y
ملخص المحتوى في الصفحة رقم 5
Preparation 4 Connecting other devices If you are not connecting any other devices, skip step 4 and perform step 5. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. • The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output component video signals. Also it cannot output any signals when the TV
ملخص المحتوى في الصفحة رقم 6
Preparation 6 Initial setting When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the initial settings. 1 Press the Main power button on the TV. The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language POWER lamp Main power button setting mode. COLOR CINEMA SYSTEM SURROUND ECO DISPLAY DISPLAY SENSOR MENU 3 button AUTO CH
ملخص المحتوى في الصفحة رقم 7
Basic operation • The illustration below is for the remote control 1 Press the POWER button to turn RM-C1019 supplied with L33 and W33 series your TV on. models. Your remote control may not look ex- • If your TV does not turn on, press the Main actly like the illustrations. power button on the TV then press the POWER button again. • You can also turn on your TV by pressing any of the following buttons; - the CHANNEL m button MUTING POWER - the TV/VIDEO button COLOR CINEMA SYSTEM SURROUND 2 S
ملخص المحتوى في الصفحة رقم 8
Remote control buttons and functions ECO SENSOR button BASS button You can adjust this TV so that the screen < AV-21W33B/AV-25L33B/AV-29W33B only > automatically adjusts to the optimum contrast according to the brightness of your You can enjoy a powerful bass sound by room. This function reduces eye strain and using the SUPER BASS (Bass Reflex) function. the power consumption of this TV. Press this button to turn the SUPER Press this button to select the desired BASS function on or off. mode. •
ملخص المحتوى في الصفحة رقم 9
Remote control buttons and functions CHANNEL SCAN button RETURN + button You can set a channel you frequently view You can quickly view all TV channels to the Return Channel and you can view programs that you can view on your TV, and search for the program you want to that channel at any time with one-touch. view. To set the channel to the Return Channel: 1 Press this button to start scanning TV channels. 1 Select the channel you want to set The TV channel programs are each to the Return Channel
ملخص المحتوى في الصفحة رقم 10
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. / 4 Press the MENU buttons to change function settings. COLOR CINEMA SYSTEM SURROUND ECO Example: DISPLAY SENSOR DISPLAY Changes the AUTO button SHUTOFF setting. MENU t MENU buttons MENU / CLOSE MENU 2 MENU 2 buttons CAPTION AUTO SHUTOFF OFF AUTO SHUTOFF ON CHILD LOCK
ملخص المحتوى في الصفحة رقم 11
Using the TV’s menus INPUT VNR You can view images from VCRs or other You can reduce picture noise. devices connected to your TV. 1 Press MENU T to display the 1 Press MENU T to display the “MENU 1” menu, then select “VNR”. “MENU 1” menu, then select MENU 1 INPUT TV “INPUT”. VNR ON MENU 1 COMPRESS(16:9) ON INPUT TV CLOSED CAPTION VNR ON PICTURE TILT 00 COMPRESS(16:9)
ملخص المحتوى في الصفحة رقم 12
Using the TV’s menus CLOSED CAPTION BLUE BACK You can view closed captions or text You can mute the sound and change the information. picture into a blue screen while no signals are received by the TV, or when the signals 1 Press MENU T to display the are unstable. “MENU 1” menu, then select “CLOSED CAPTION”. 1 Press MENU T to display the MENU 1 “MENU 2” menu, then select “BLUE INPUT TV VNR ON BACK”. COMPRESS(16:9) ON CLOSED CAPT
ملخص المحتوى في الصفحة رقم 13
Using the TV’s menus VIDEO-2 SET AUTO CH PRESET Set the VIDEO-2 SET correctly according to You can automatically preset all TV channels the video signal input from the external that can be received by your TV to channels. device connected to the VIDEO-2 terminal. 1 Press MENU T to display the If this setting is incorrect, images will not “MENU 3” menu, then select “AUTO be displayed. CH PRESET”. 1 Press MENU T to display the MENU 3 “MENU 2” menu, then select AUTO CH PRESET
ملخص المحتوى في الصفحة رقم 14
Using the TV’s menus CHANNEL SKIP LANGUAGE You can set undesired channels to be You can select the language for the on-screen skipped. Channels set to be skipped cannot display. be selected by the CHANNEL m buttons 1 Press MENU T to display the nor the CHANNEL SCAN button. “MENU 3” menu, then select 1 Press MENU T to display the “LANGUAGE”. “MENU 3” menu, then select MENU 3 “CHANNEL SKIP”. AUTO CH PRESET MANUAL CH PRESET MENU 3 LANGUAGE ENGLI
ملخص المحتوى في الصفحة رقم 15
Using the TV’s menus Picture Adjustments AI VOLUME You can adjust the picture as you like. You can prevent the sudden increase or decrease of volume that occurs when 1 Press MENU T to display the changing channels or switching VIDEO “MENU 4” menu. modes. MENU 4 TINT 1 Press MENU T to display the COLOR “MENU 5” menu, then select BRIGHT PICTURE “AI VOLUME”. DETAIL MENU 5 SELECT BY EXIT BY BASS OPERATE BY -+ DISPLAY TREBLE BALANCE AI VOLUME ON 2
ملخص المحتوى في الصفحة رقم 16
Attaching the Twin Port Bass Blaster Unit The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the TV, mount the unit correctly on the TV. Note: • The SUPER BASS functions do not work unless the Twin Port Bass Blaster Unit is connected correctly to the TV. For details on the SUPER BASS functions, see page 8. CAUTION: • The Twin Port Bass Blaster Unit is just placed on top of the TV and is not held in place by a screw. When you use
ملخص المحتوى في الصفحة رقم 17
TV buttons and parts Front 1 2 8 345 6 7 9 0 VR L/MONO IN (VIDEO-3) 12 34 5 7 8 9 0 1 3 4 5 7 8 9 0 2 POWER MENU CHANNEL VOLUME VR L/MONO IN (VIDEO-3) EXIT 1 Headphone jack 6 TV/VIDEO button 2 VIDEO-3 terminal 7 ECO sensor 3 MENU button 8 Remote control sensor 4 CHANNEL m buttons 9 POWER lamp 5 VOLUME m buttons 0 Main power button Rear COMPONENT VIDEO-1 (VIDEO-2) OUTPUT INPUT INPUT 1 VIDEO-1 INPUT terminal V Y / V V 2 CO
ملخص المحتوى في الصفحة رقم 18
Using the buttons on the TV Basic operation Operating menus • Check to make sure the CHILD LOCK function You can operate functions in menus using is set to “OFF”. When the CHILD LOCK function the front control buttons on the TV. is set to “ON”, the TV cannot be operated using the front control buttons. For details, see “CHILD 1 Press MENU y to display a menu. LOCK” on page 12. 2 Press MENU y repeatedly to display 1 Press CHANNEL M to turn the TV the menu you want to use. on from standby mode. 3
ملخص المحتوى في الصفحة رقم 19
Troubleshooting If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below. If the problem persists even after taking the measures indicated, please contact a service technician. Cannot turn the TV on Poor picture • Press the Main power button on the TV. •Press the COLOR SYSTEM button to select another color system. (see page 8.). However, • Connect the power cord to the AC outlet. color system cannot be changed in TV mode. • Adjust
ملخص المحتوى في الصفحة رقم 20
Specifications TV RF systems M, N Color systems NTSC 3.58 (in TV mode only) NTSC 3.58/NTSC 4.43, PAL (in VIDEO mode only) Channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output VIDEO-1: VIDEO input, AUDIO L/R input VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input VIDEO-3: VIDEO input, AUDIO L/R input OUTPUT: VIDEO output , AUDIO L/R output Headphone jack: stereo
