ملخص المحتوى في الصفحة رقم 1
For models:
AV-36D503
AV-36D303
AV-36D203
COLOR TELEVISION
AV-32D503
USER'S GUIDE
AV-32D303
AV-32D203
AV-27D503
Illustration of AV-32D503 and RM-C251
PLEASE NOTE
This web based PDF File for this instruction book is not an exact replica
of the instruction book that comes with the TV.
IMPORTANT NOTE TO THE CUSTOMER
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of th
ملخص المحتوى في الصفحة رقم 2
IMPORTANT SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient mag- nitude to constitute a risk of electric shock to pe
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFEGUARDS CAUTION: Please read and retain for your safety. Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in potential electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for its installation, use and servicing. And also follow all warnings and instructions marked on your TV set. INSTALLATI
ملخص المحتوى في الصفحة رقم 4
7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE 8 TV sets are provided with ventilation openings in the cabinet to allow heat generated du
ملخص المحتوى في الصفحة رقم 5
13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges. 14 ATV set and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the TV set and cart combination to overturn. SERVICE 15 Unplug this TV set from the wall outlet and r
ملخص المحتوى في الصفحة رقم 6
Table of Contents UNPACKING YOUR TV .....7 Onscreen Menus (Cont.) Sound Settings . . . . . . . . . . . . . 39 Bass . . . . . . . . . . . . . 39 TV Models and Treble. . . . . . . . . . . . . . 39 Remote Controls ........8 Balance. . . . . . . . . . . . . 39 MTS (Multi-channel Sound . . . 39 General Items . . . . . . . . . . . . . . 40 Quick Setup Guide .......10 On/Off Timer . . . . . . . . . . 40 Closed Cap
ملخص المحتوى في الصفحة رقم 7
Unpacking Your Television Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include: 1 Remote Two AA Control Batteries 1 Television A matching TV stand is also available (optional). MENU Note:Your television MENU — CHANNEL + — VOLUME + POWER ON TIMER and/or remote OPERATE control may differ from the examples illustrated here
ملخص المحتوى في الصفحة رقم 8
TV Models and Remotes Guide NOTE: Before you connect your televison to another device, please refer to the proper dia- grams for your TV and remote, depending on the model that you have purchased. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your televison. Rear Panel Diagram Front Panel Diagram 8
ملخص المحتوى في الصفحة رقم 9
TV Models and Remotes Guide Remote Control RM-C252 Remote Control RM-C251 MODELS: MODELS: AV-36D303, AV-36D203, AV-36D503, AV-32D503, AV-32D303, and AV-32D203 and AV-27D503 9
ملخص المحتوى في الصفحة رقم 10
Quick Setup 1 Getting Started These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. This information includes basic instructions on operating your remote control, making a simple cable/antenna and optional VCR connection and, finally, information on programming your television's Auto Tuner. If you have questions, or for more detailed information on any of these steps, please consult other sections of this
ملخص المحتوى في الصفحة رقم 11
Quick Setup 2 Step Two - Making Basic Connections Next you will need to connect your television to an antenna or cable system. The most basic antenna/cable connection is shown below. For more detailed connections, such as ones where a cable box is required, see pages 14 to 15. WALL CABLE or ANTENNA OUT Cable/RF connector Illustration of AV-32D503 1) Connect an RF cable out from the wall outlet in to the RF Input on the back of the TV. You may also wish to connect a VCR at this point. A basic V
ملخص المحتوى في الصفحة رقم 12
Quick Setup 3 Step Three - The Plug In Menu When you turn your television on for the first time the Plug In Menu will appear. This menu sets some of the basic settings for your television. A complete description of the Plug In Menu can be found starting on page 25. We recommend you complete the Plug In Menu items before you start using your television. But to begin watching your television right away you only need to run the Auto Tuner Setup. This lets your television learn the channels it is ab
ملخص المحتوى في الصفحة رقم 13
Connections Cable and VCR Connections There are three basic types of antenna or cable connections: • If you have an antenna or have a cable system that does not require you use a cable box to select channels, please refer to Diagram #1. • If you have a cable system that requires the use of a cable box to access all the channels, please refer to Diagram #2. If you cannot operate your Picture-In-Picture function using Diagram #2, try the connection shown in Diagram #3. It is possible your cable
ملخص المحتوى في الصفحة رقم 14
Connections Cable and VCR Connections - Continued WALL Diagram #2 CABLE or ANTENNA OUT VCR IN OR OR Illustration of AV-32D503 1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box. 2) Connect an RF cable from the RF Output of the cable box, in to the RF Input on the back of the VCR. 3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the TV. 4) Connect the yellow video cable out from the VCR’s Video Output, in t
ملخص المحتوى في الصفحة رقم 15
Connections Cable and VCR Connections - Continued Diagram #3 WALL CABLE or ANTENNA TWO-WAY OUT SPLITTER VCR IN OR OR Illustration of AV-32D503 1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter. 2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the cable box RF Input. 3) Connect an RF cable from the Cable Box Output, in to the VCR RF Input. 4) Connect an RF cable from the other the RF Output on the splitter, i
ملخص المحتوى في الصفحة رقم 16
Connections Connecting to a DVD player DVD Player AUDIO OUT Green Blue Red Illustration of AV-32D503 1) Connect Green cable out from DVD player “Y” Component Output, in to TV “Y” Component Input. 2) Connect Blue cable out from DVD player “PB” Component Output, in to TV “PB” Component Input. 3) Connect Red cable out from DVD Player “PR” Component Output, in to TV “PR” Component Input. 4) Connect White Audio cable out from DVD Left Audio Output, in to TV Left Audio Input 2. 5) Connect Red Audi
ملخص المحتوى في الصفحة رقم 17
Connections Connecting to an External Amplifier Illustration of AV-32D503 1) Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left Audio Input jack. 2) Connect the red audio cable from the TV’s Right Audio Output jack to the Amplifier’s Right Audio Input jack. Connecting to a Camcorder You may connect a camcorder to your television by using the front Input Jacks (Input 3) located under the front panel door. To access, pull lightly on the door to open it. Yo
ملخص المحتوى في الصفحة رقم 18
Connections Connecting to JVC AV Compu Link JVC’s AV Compu Link feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape* into your JVC-brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the AV- CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input • The AV Compu Link cable may be included with the JVC AV Compu
ملخص المحتوى في الصفحة رقم 19
Remote Control Remote Control Basics • Before you can operate the remote control, you must first install the batteries (included). See “Changing the Batteries” at the bottom of this page for instructions. (For an illustra- tion, please see page 10.) • Press the POWER button to turn the television on or off. • Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box. • Slide the VCR/DVD selector switch to VCR to control a VCR, slide to DVD to c
ملخص المحتوى في الصفحة رقم 20
Remote Programming Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control sup- plied by the manufacturer. Cable Box or Satellite codes The remote control is programmed with CATV and/or Satellite codes for power on, power off, channel up, channel down,
