ملخص المحتوى في الصفحة رقم 1
with Caller ID Digital Answering System
Cordless Phone System
USER’S MANUAL
t2447
caller ID / call waiting *
Digital answering system
with 3 mailboxs and
15 minutes record time.
90 name and number
caller ID memory
ملخص المحتوى في الصفحة رقم 2
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water (for examp
ملخص المحتوى في الصفحة رقم 3
Important Safety Instructions 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak. 15. Only put the Handset of your telephone next to your ear when it is in normal talk mode. 2
ملخص المحتوى في الصفحة رقم 4
Before You Begin Enhanced 2.4GHz Technology - Dual Band transmission combines the best of 2.4GHz and 900MHz technologies, providing enhanced performance over stan- dard cordless telephones. 3
ملخص المحتوى في الصفحة رقم 5
Before You Begin Parts Check List: 1. Base Unit 5. Battery 2. Handset 6. Belt Clip 3. Base AC Power Adaptor 7. User’s Manual 4. Telephone Line Cord 8. Base Wall Mounting Bracket To purchase replacement battery packs, call VTech Communications, Inc. at 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1- 800-267-7377. Handset Base Unit Belt Clip Battery User’s Manual Base Wall Mounting Bracket Telephone Line Cord 4
ملخص المحتوى في الصفحة رقم 6
The Handset Layout 1 2 9 3 4 10 5 11 12 6 13 7 14 8 1. Antenna 8. Microphone 2. Earpiece 9. Headset Jack 3. LCD 10. Sel Key 4. Left and Right Arrow Keys 11. Off Key 5. Phone/Flash Key 12. Hold Key 6. Dialing Keys (0-9,*,#) 13. Redial/Pause Key 7. Chan/Delete Key 14. Prog Key 5
ملخص المحتوى في الصفحة رقم 7
MODEL: 2447 VTECH TELECOMMUNICATIONS LTD. MANUFACTURED IN CHINA COMPLIES WITH 47 CFR PART 68 HAC FCC ID: EW780-5298-B00 REGISTRATION NO.: US: EW7W901B24280 RINGER EQUIVALENCE: 0.1B USOC JACK: RJ11C, RJ11W THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE; AND 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. PRIVACY OF COMMUNICATI
ملخص المحتوى في الصفحة رقم 8
Installation Before You Install 1. Choose a location for the Base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electri- cal outlet (110V AC) not controlled by a wall switch. 2. Install the Handset battery. Use only VTech batteries. a) Remove battery compartment cover by pressing on the indentation and slid- ing downward. b) Align the two holes in the plug with the socket pins, then snap the plug into place. c) Place the battery in th
ملخص المحتوى في الصفحة رقم 9
MODEL: 2447 VTECH TELECOMMUNICATIONS LTD. MANUFACTURED IN CHINA COMPLIES WITH 47 CFR PART 68 HAC FCC ID: EW780-5298-B00 REGISTRATION NO.: US: EW7W901B24280 RINGER EQUIVALENCE: 0.1B USOC JACK: RJ11C, RJ11W THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE; AND 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. PRIVACY OF COMMUNICATI
ملخص المحتوى في الصفحة رقم 10
Installation Wall Mounting The Wall Mount bracket is designed for use on standard wall mount plates only. 1. Run the power and telephone line cords through the slots in the bracket, connecting them to the jacks located on the underside of the Base. 2. Plug the AC adapter into an electrical outlet. If the battery has not been previously charged, place the Handset in its Base, and allow it to charge for 12 hours. 3. Connect the telephone line cord to the wall jack. 4. Line up the tabs on the wall
ملخص المحتوى في الصفحة رقم 11
Telephone Operation Handset Volume Adjust the volume while on a call. Answer a Call A double beep will sound4when Press any key you reach the maximum or mini- except OFF. mum setting. DIR Hold Press DIR when phone is not in Press to put a call use to display phonebook en- on hold. Press again tries. While entering letters, to release hold. press to advance cusor. OR CID Lift the Handset of Press CID when phone is not an extension. in use to display caller ID infor- mation. When entering num- ber
ملخص المحتوى في الصفحة رقم 12
Telephone Operation Page Press to page the Handset for up to 60 seconds. Press again, press OFF on Handset or place Handset in Base to cancel the page. In Use/Charging • Flashes in unison with the ring of an incoming call. • Flashes slowly when the Handset is in use. • Flashes rapidly when a call is on hold. • Glows steadily when the Handset is charging. 11 Basic Operation
ملخص المحتوى في الصفحة رقم 13
Telephone Operation Handset Ringer Style/Battery Save You can select from four different Handset ringer styles, or turn the ringer off and extend the battery life. 1. Make sure the Handset is off. 2. Press PROG. 3. Press until the screen displays RINGER:. 4. Press SEL. The current setting blinks, and you will hear a sample of the ring. 5. Press or to select RINGER:1, 2, 3, 4 or OFF. You will hear a sample of each ring. 6. Press SEL to choose the displayed ringer setting. Set Dial Mode If you
ملخص المحتوى في الصفحة رقم 14
Telephone Operation Display Screen Messages Screen Displays: When: ** RINGING ** ** RINGING ** ** RINGING ** ** RINGING ** ** RINGING ** There is a call coming in. The Handset is waiting for a dial tone. CONNECTING... CONNECTING... CONNECTING... CONNECTING... CONNECTING... The Handset is in use. PHONE ON PHONE ON PHONE ON PHONE ON PHONE ON The Handset is changing to another of the 30 SCANNING... SCANNING... SCANNING... SCANNING... SCANNING... channels available. The Base is paging the Han
ملخص المحتوى في الصفحة رقم 15
Speed Dial You can store up to 9 telephone numbers with names (up to 15 characters, 24 digits each location) you dial frequently into the Speed dial memory locations you assign (1 though 9) in the Handset. You can also store telephone numbers with names alphabetically in the directory. See Telephone Directory for instructions. NOTES: 1. The entries you store in Speed dial memory will be marked with 01 through 09 and also display in the directory. 2. Press OFF at any time to exit speed dial mode.
ملخص المحتوى في الصفحة رقم 16
Speed Dial — OR — Press REDIAL/PAUSE to display the last number dialed from this phone. 7. Press SEL or PROG to store your entry. The screen displays DISTINCT RING? and the current setting. 8. Press or to change the setting. Choose Y (yes) if you wish the phone to alert you to calls from this number by assigning a distinctive ringer after the first ring. Choose N (no) for a normal ringer. 9. Press SEL or PROG to confirm your selection. If you chose Y in step eight, a DDDDD will be displayed
ملخص المحتوى في الصفحة رقم 17
Speed Dial Reassign Locations in Memory 1. Press and hold the memory location key (1 through 9) of the entry you wish to reassign. 2. When the screen displays the entry you want to reassign, press SEL. Then press until SPEED flashes. SPEED EDIT ERASE SPEED EDIT ERASE SPEED EDIT ERASE SPEED EDIT ERASE SPEED EDIT ERASE 800-595-9511 800-595-9511 800-595-9511 800-595-9511 800-595-9511 01 01 01 01 01 3. Press SEL. The screen displays ENTER 1-9. 4. Press the keys (1 through 9) to reassign this
ملخص المحتوى في الصفحة رقم 18
Telephone Directory Your t 2447 can store 50 (including 9 speed dial entries) telephone numbers with names (up to 15 characters for the name and 24 digits for the number). NOTE: Press OFF at any time to exit the directory. Store a Number/Name in the Directory 1. Press PROG. The screen displays DIRECTORY. 2. Press SEL. The screen displays ENTER NAME. 3. Using the chart below, enter up to 15 characters for the name you’re storing with the number. Use to backspace and make corrections; use to adv
ملخص المحتوى في الصفحة رقم 19
Telephone Directory alert you to calls from this number by changing to a distinctive ringer after the first ring. Choose N (no) for a normal ringer. 8. Press SEL or PROG to confirm your selection. If you chose Y in step 7, a D will be displayed with the directory entry. NOTE: When the memory is full the screen will display MEMORY FULL, an error tone sounds and you will not be able to store a new number until you delete a stored number to make room for another entry. Edit a Number/Name Stored in
ملخص المحتوى في الصفحة رقم 20
Telephone Directory Move a Number/Name to Speed Dial Memory 1. Press (DIR). The screen displays DIRECTORY. 2. Press or to scroll alphabetically through entries stored in directory. — OR — Press the dial pad key for the first letter of the entry you want to move. 3. When the screen displays the entry you want to move, press SEL. Then press until SPEED flashes. SPEED SPEED SPEED SPEED SPEED EDIT ERASE EDIT ERASE EDIT ERASE EDIT ERASE EDIT ERASE 800-595-9511 800-595-9511 800-595
