ملخص المحتوى في الصفحة رقم 1
EXP3240_UP001BH UP001BA_1 1/7/3 5:30 PM Page 12
ملخص المحتوى في الصفحة رقم 2
EXP3240_UP001BH UP001BA_1 1/7/3 5:29 PM Page 1 Introduction The Uniden EXP3240 Series (EXP3240/EXP3241) 2.4GHz cordless phones are designed and engineered to exacting standards for reliability, long life, and outstanding performance. NOTE: Some illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless phone may vary. • 2.4 GHz Extended Range • Up to 7 Hours Talk Time • Up to 14 days Standby Time Technology • 10-Number Memory • 20 Channel
ملخص المحتوى في الصفحة رقم 3
EXP3240_UP001BH UP001BA_1 1/7/3 5:29 PM Page 2 Included with Your Phone • Base • AC Adapter • Rechargeable Battery • Handset • Telephone Cord Setting up the Phone Do the following steps: A. Choose the best location C. Connect the base unit B. Install the rechargeable battery pack into the handset D. Choose the dialing mode A. Choose the best location Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS
ملخص المحتوى في الصفحة رقم 4
EXP3240_UP001BH UP001BA_1 1/7/3 5:29 PM Page 3 5) Place the handset in the base with the keypad facing forward. Be sure there is sufficient space to raise the base antenna to a vertical position. NOTE: • Use only the Uniden Battery (BT-905) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department at (800) 554-3988, Monday thru Friday from 7:00 a.m. to 5:00 p.m. or online at www.uniden.com Battery use time (per charge) From fully charged • Up to sev
ملخص المحتوى في الصفحة رقم 5
EXP3240_UP001BH UP001BA_1 1/7/3 5:29 PM Page 4 5) Connect the telephone line cord to the TEL LINE jack and a telephone outlet once the handset is fully charged. TIP: If your telephone outlet isn’t modular, contact your telephone company for assistance. Modular D. Choose the dialing mode Most phone systems use tone dialing which sends DTMF tones through the phone lines. However some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on y
ملخص المحتوى في الصفحة رقم 6
EXP3240_UP001BH UP001BA_1 1/7/3 5:29 PM Page 5 Terminology Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation. • Talk Mode - The handset is off the base and talk has been pressed enabling a dial tone. • Standby Mode - The handset is not in use, off the base, and talk has not been pressed. A dial tone is not present. Adjusting the Ringer and Earpiece Volume Ringer tone When the phone is in standby mode, pressing the vol/ring key on the han
ملخص المحتوى في الصفحة رقم 7
EXP3240_UP001BH UP001BA_1 1/7/3 5:29 PM Page 6 Page To locate the handset (while it’s off the base), press find handset on the base. The handset beeps for 60 seconds. Paging is canceled when pressing any key, find handset on the base or return the handset to the base. Flash and Call Waiting If you have “Call waiting” service and a call waiting tone sounds while you are on a call, press flash to accept the waiting call. There is a short pause, then you will hear the new caller. To return to the
ملخص المحتوى في الصفحة رقم 8
EXP3240_UP001BH UP001BA_1 1/7/3 5:29 PM Page 7 One-touch RocketDial Your phone is equipped with “One-touch RocketDial” for instant dialing. It is used to dial the phone number stored in the one-touch RocketDial location (See “Storing a Phone Number in Memory”). To instantly dial the phone number stored in the one-touch RocketDial location, simply press RocketDial. (There is no need to press talk. The phone will automatically dial). If you press RocketDial and a phone number is not stored in t
ملخص المحتوى في الصفحة رقم 9
EXP3240_UP001BH UP001BA_1 1/7/3 5:29 PM Page 8 Troubleshooting If your cordless telephone is not performing to your expectations, please try these simple steps. NOTE: Do not attempt to service this unit yourself. Servicing must be performed by qualified personnel. Symptom Suggestion The charge/in use LED won’t • Make sure the AC adapter is plugged into the base and a wall outlet. illuminate when the handset • Make sure the handset is properly seated in the base. is placed in the base. • Make
ملخص المحتوى في الصفحة رقم 10
EXP3240_UP001BH UP001BA_1 1/7/3 5:29 PM Page 9 on it. Precautions! 9. Do not overload wall outlets and extension cords, as this can Before you read anything else, please observe the following: result in the risk of fire or electrical shock. Warning! 10.Never push objects of any kind into this product through Uniden America Corporation DOES NOT represent this unit to be cabinet slots, as they may touch dangerous voltage points or waterproof. To reduce the risk of fire, electrical shock, or dama
ملخص المحتوى في الصفحة رقم 11
EXP3240_UP001BH UP001BA_1 1/7/3 5:29 PM Page 10 Telephone Line Problems Connecting the Telephone Cords The FCC has granted the telephone company the right to Consider these safety guidelines before connecting the telephone disconnect service in the event that your phone causes problems cords: on the telephone line. Also, the telephone company may make Caution! changes in facilities and services which may affect the operation of • Never install telephone wiring during a lightning storm. your un
ملخص المحتوى في الصفحة رقم 12
EXP3240_UP001BH UP001BA_1 1/7/3 5:30 PM Page 11
