ملخص المحتوى في الصفحة رقم 1
43-1123.fm Page 1 Tuesday, September 5, 2000 11:13 AM
A
Cat. No. 43-1123
OWNER’S MANUAL
ET-1123
Please read before using this equipment.
900 MHz Digital Dual Keypad
Cordless Phone
with Speakerphone and
Caller ID/Call Waiting
ملخص المحتوى في الصفحة رقم 2
43-1123.fm Page 2 Tuesday, September 5, 2000 11:13 AM FEATURES Your RadioShack Digital 900 MHz Dual WARNING: To reduce the risk of fire Keypad Cordless Speakerphone oper- or shock hazard, do not expose this ates on the 900 MHz band, which product to rain or moisture. means less interference, clearer sound, and greater range than 46/49 MHz cord- CAUTION less telephones. The Caller ID records RISK OF ELECTRIC SHOCK. each caller's telephone number (and ! DO NOT OPEN. name, if available in your
ملخص المحتوى في الصفحة رقم 3
43-1123.fm Page 3 Tuesday, September 5, 2000 11:13 AM Two-Way Intercom/Paging System — switch from pulse to tone dialing for lets you send a signal from the base to long-distance, bank-by-phone, or other the handset, or from the handset to the special services. base, to locate the handset or page someone using it away from the base. If Redial — lets you quickly redial any of someone answers the page, you can the last three numbers dialed on the use the phone as an intercom and handset. You ca
ملخص المحتوى في الصفحة رقم 4
43-1123.fm Page 4 Tuesday, September 5, 2000 11:13 AM Important Caller ID Information FCC STATEMENT To use the phone's Caller ID and Caller Your phone complies with Part 68 of ID with Call Waiting features, you must FCC Rules. You must, upon request, be in an area where those services are provide the FCC registration number available and you must subscribe to and the REN to your phone company. those services through your local phone These numbers are on the bottom of the company. base. Where
ملخص المحتوى في الصفحة رقم 5
43-1123.fm Page 5 Tuesday, September 5, 2000 11:13 AM CONTENTS Preparation .............................................................................................................. 6 Mounting the Phone ........................................................................................... 6 Connecting and Charging the Battery Pack ....................................................... 8 Setting the Dialing Mode ........................................................................
ملخص المحتوى في الصفحة رقم 6
43-1123.fm Page 6 Tuesday, September 5, 2000 11:13 AM PREPARATION Note: The base unit display is protected store. Or, you can let the phone during shipment by a piece of clear film. company update the wiring for you. Carefully peel off this film before using • The USOC number of the jack to be your phone for the first time. installed is RJ11C (RJ11W for a wall plate). MOUNTING THE PHONE On a Desk Top You can place the phone's base on a desk or table, mount it on a standard 1. Plug one end of
ملخص المحتوى في الصفحة رقم 7
43-1123.fm Page 7 Tuesday, September 5, 2000 11:13 AM 5. Plug the adapter into a standard AC in Step 3 of “On a Desk Top” on outlet. Page 7. 6. Lift the base's antenna to a vertical 5. Route the adapter and modular position. cords through the grooves on the bracket. Adapter On a Wall Plate and Modular Cord 1. Detach the stand from the base by Grooves pressing the latches on the stand. Stand 6. Plug the modular cord's other end into the wall plate jack, then align the bracket's keyhole slots
ملخص المحتوى في الصفحة رقم 8
43-1123.fm Page 8 Tuesday, September 5, 2000 11:13 AM On a Wall CONNECTING AND CHARGING THE BATTERY To mount the phone directly on a wall, PACK you need two screws (not supplied) with heads that fit into the keyhole slots on The phone comes with a rechargeable the bottom of the base. Follow the steps nickel-cadmium battery pack installed in under “On a Wall Plate” on Page 7, then the handset, but not connected. Before apply these additional instructions for using your phone, you must connec
ملخص المحتوى في الصفحة رقم 9
43-1123.fm Page 9 Tuesday, September 5, 2000 11:13 AM Important: Be sure the battery pack is battery pack loses its ability to fully properly connected before you try to recharge. charge it. • If the battery pack is completely dis- charged or the base loses power Notes: while the handset is away from it, place the handset on the base to • When you first use the phone after reset the security access-protection charging or recharging the battery code. If it was the handset that lost pack, the p
ملخص المحتوى في الصفحة رقم 10
43-1123.fm Page 10 Tuesday, September 5, 2000 11:13 AM If the dial tone stops, you have change the setting. Press the other but- touch-tone service. Leave DIAL ton to change the setting. MODE P- -T set to -T. If the dial tone continues, you have pulse service. Set DIAL MODE P- -T to P-. SETTING AUTO TALK 4. Press SPEAKER to hang up. Your phone is preset so you must press TALK to answer a call. With auto talk turned on, you can answer a call by just TURNING THE BASE lifting the handset from
ملخص المحتوى في الصفحة رقم 11
43-1123.fm Page 11 Tuesday, September 5, 2000 11:13 AM 1. Lift the handset and hold down 4. Press SELECT, then press CALL ID CALL ID until Caller ID setup menu and return the handset to the base appears with Auto Talk selected. cradle to store the new setting. 2. Press 2 or 9 9 9 9 to select CIDCW Note: In some areas, the area code is (Caller ID/Call Waiting). necessary even for a local call. If you 3. Press SELECT to change the Caller live in such an area, do not enter the ID/Call Waiting se
ملخص المحتوى في الصفحة رقم 12
43-1123.fm Page 12 Tuesday, September 5, 2000 11:13 AM OPERATION Note: To use the speakerphone, you Note: You can also dial the number be- must use the base keypad; to use the fore you press SPEAKER. If you make a handset, you must use the handset key- mistake, repeatedly press CLEAR to pad. erase each digit up to the wrong entry, then enter the correct number. You can also press and hold CLEAR for more than one second to delete the entire MAKING A CALL number. Using the Handset To adjust the
ملخص المحتوى في الصفحة رقم 13
43-1123.fm Page 13 Tuesday, September 5, 2000 11:13 AM To answer the call using the handset, lift USING MUTE the handset off the base and press TALK. If auto talk is on, just lift the hand- To talk to someone in the room while us- set or press any key on the handset. To ing the speakerphone without the per- answer a call using the speakerphone, son on the other end of the phone line simply press SPEAKER. hearing your conversation, press MUTE. MUTE appears on the base's display. ADJUSTING THE
ملخص المحتوى في الصفحة رقم 14
43-1123.fm Page 14 Tuesday, September 5, 2000 11:13 AM set and press REDIAL/PAUSE. The last USING BOTH THE number dialed on the handset appears HANDSET AND THE below . Press REDIAL/ SPEAKERPHONE PAUSE repeatedly until the desired num- ber appears on the display, then press If someone else is using the speaker- TALK. phone, press TALK on the handset to join the conversation. If someone else is To dial the last number dialed on the using the handset, press SPEAKER on base, press RED
ملخص المحتوى في الصفحة رقم 15
43-1123.fm Page 15 Tuesday, September 5, 2000 11:13 AM 2. Dial the service's main number. To end an intercom call, press TALK on the handset, press SPEAKER on the 3. When the service answers, press base, or hang up the handset. TONE/ . Any additional numbers you dial are sent as tone signals. If a call comes in during an intercom 4. When you hang up, the phone auto- conversation, only the base rings, but matically resets to pulse dialing. the person at the handset can also hear the ring throu
ملخص المحتوى في الصفحة رقم 16
43-1123.fm Page 16 Tuesday, September 5, 2000 11:13 AM To transfer a call from the base to the To connect the headset, open the rub- handset, press INTERCOM. The call is ber cover marked on the side of the placed on hold, CHARGE/IN USE handset, then insert the headset's plug blinks, and Hold and Paging Hand- into the jack. set appear on the base's display. Headset When the person with the handset an- Jack swers, press SPEAKER. The call is re- leased from hold and transferred to the handset a
ملخص المحتوى في الصفحة رقم 17
43-1123.fm Page 17 Tuesday, September 5, 2000 11:13 AM 3. Select an empty memory location MEMORY DIALING (or the one you want to replace) by using 8 8 8 8 or 9 9 9 9 to scroll through the You can store up to 20 numbers in the list or entering the location number handset's memory and another 10 in the (01-20). Precede a single-digit num- base's memory, then dial a stored num- ber with a 0 (01, for example). ber by pressing a memory location num- ber. You can also store a name with Notes: each
ملخص المحتوى في الصفحة رقم 18
43-1123.fm Page 18 Tuesday, September 5, 2000 11:13 AM 7. Enter the phone number and any To clear a stored number, simply store a tone or pause entries (see “Entering new number in its place. Or, hold down a Pause” on Page 19). MEMORY until Store Number ap- pears. Then press MEMORY and the If you make a mistake, use the memory location number (0-9) or the same method to correct it as one-touch dial button (M1-M4) you want described in Step 5. to clear. A tone sounds and Memory n 8. Press SELE
ملخص المحتوى في الصفحة رقم 19
43-1123.fm Page 19 Tuesday, September 5, 2000 11:13 AM Menu Options: number (01-20) or repeatedly press 8 8 8 8 or 9 9 9 9. • Edit Memory nn — edit the record as described in Steps 5 To see the stored phone numbers, press through 8 of “Storing a Name and 7 7 7 7. An arrow to the right of the number Number in Memory” on Page 17. means it is longer than 14 digits. Press • Delete Memory nn — the display 7 7 7 7 again to see the rest of the number. prompts you to confirm the deletion. Move the cu
ملخص المحتوى في الصفحة رقم 20
43-1123.fm Page 20 Tuesday, September 5, 2000 11:13 AM Note: If you select an empty memory lo- CALLER ID OPERATION cation, no number appears. If you subscribe to Caller ID service from To dial a number stored in one-touch your phone company, the phone compa- dial memory, simply press the button ny sends information about the call, as (M1-M4). You do not need to press well as the time and date, between the SPEAKER to dial the number in one- first and second rings of every call you touch dial m
