ملخص المحتوى في الصفحة رقم 1
43-5862
5.8 GHz
Expandable Cordless Telephone
with Talking Caller ID
& Digital Answering System
In this Package
• Handset (1) Handset (1) • Ni-MH Battery P Ni-MH Battery Pack ack
• Base (1) (1 inside handset)
• Quick Start Guide (1) • Modular Cord (1 long, 1 short)
• This Owner’s Manual (1) • AC Adapter (1)
• Wall Mount Adapter (1) • Belt Clip (1)
Please read this Owner’s Manual before installing,
setting up and using your new product.
www.radioshack.com
UP01799ZZ_1.indb 1 4/12/2006 12:43:
ملخص المحتوى في الصفحة رقم 2
Contents Contents Features 6 Introduction 7 Important Information 8 FCC Statement 8 Surge Protection 10 Important Safety Instructions 10 Important Caller ID Information 11 Read This Before Installation 11 Controls & Functions 12 Installation 14 Selecting a Location 14 Connecting the Phone Base 15 On a Wall Plate or Wall 16 Connecting/Charging the Battery Pack 18 Notes on Recharging 18 Install the Optional Power Backup Battery in the Base 20 Installing a Belt Clip 21 Using a Headset 21 Usi
ملخص المحتوى في الصفحة رقم 3
Contents Basic Setup 29 Changing the Dial Mode 29 Selecting a Language for the Display 30 Setting the Date and Time 30 Activating Caller ID on Call Waiting and Call Waiting Deluxe 31 Activating the Key Touch Tone 32 Adjusting the LCD contrast 33 Adjustingthe Ringer,Earpiece and SpeakerV olume 34 T-coil (Handset Only) 35 Adding OptionalAccessor y Handsets 3 6 Ten Multi-Handset Expandability 36 Registering Accessory Handsets 36 Resetting Handsets 37 SettingUp the Phonebook 37
ملخص المحتوى في الصفحة رقم 4
Contents Hanging Up 50 Making a Call from the Phonebook 50 Making a Call with Speed Dial 51 Testing Stored Emergency Numbers 51 Switching to the Speakerphone during a Call using the Handset 51 Using Caller ID andCall Waiting 52 Talking Caller ID (Base Only) 52 Using the Caller ID List 53 Making a Call from a Caller ID Record 54 Deleting Caller ID Records 54 Using Call Waiting 55 Using Call Waiting Deluxe 56 Redialing a Number 57 Using the Redial List 57 Making a Call from a Redial Record
ملخص المحتوى في الصفحة رقم 5
Contents Traveling Out of Range 68 SettingUp the Answering Machine 69 Features 69 Using the Answering Machine Interface 69 Selecting a Language for Announcements 71 Recording a Personal Greeting 71 Selecting a Greeting 72 Deleting Your Personal Greeting (Base Only) 73 Setting the Number of Rings 74 Setting the Record Time (or Announce Only) 74 Activating the Message Alert 75 Activating Call Screening 76 Setting a Security Code or Personal Identification Number (PIN) 77 Using the Answering Ma
ملخص المحتوى في الصفحة رقم 6
The Basics Features Convenient Extension Placement — lets you add up to nine additional accessory handsets (RadioShack 43-5562) anywhere you have an AC outlet, regardless of phone jack location. Call Waiting/Caller ID — lets you answer a call even when you are on the phone; see who’s calling before you answer. Talking Caller ID — The Caller ID that Talks. The base will announce the name of incoming callers if you subscribe to Caller ID service. Speakerphone — lets you conduct a hands-free c
ملخص المحتوى في الصفحة رقم 7
The Basics Introduction Thank you for purchasing your RadioShack 5.8 GHz Multi- Handset Expandable Cordless Telephone. Unlike other conventional cordless telephones, your telephone supports up to ten handsets on a single telephone line. You can add a handset to any room in your home or office that has an AC outlet. No more running around the house to answer the phone! You can transfer outside calls to other handsets. If you subscribe to Call Waiting with Caller ID, the phone shows you the
ملخص المحتوى في الصفحة رقم 8
The Basics Important Information This telephone has been tested and found to comply with all applicable UL and FCC standards. FCC Statement This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the base of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. Your phone is not intended to be used with party- line s
ملخص المحتوى في الصفحة رقم 9
The Basics In the unlikely event that your phone causes problems on the phone line, the phone company can temporarily discontinue your service. If this happens, the phone company attempts to notify you in advance. If advance notice is not practical, the phone company notifies you as soon as possible and advises you of your right to file a complaint with the FCC. Also, the phone company can make changes to its lines, equipment, operations, or procedures that could affect the operation of t
ملخص المحتوى في الصفحة رقم 10
The Basics Surge Protection Your telephone has built-in protection circuits to reduce the risk of damage from surges in telephone line and power line current. These protection circuits meet or exceed the FCC requirements. However, lightning striking the telephone or power lines can damage your telephone. Lightning damage is not common. Nevertheless, if you live in an area that has severe electrical storms, we suggest that you unplug your phone when storms approach to reduce the possibili
ملخص المحتوى في الصفحة رقم 11
The Basics Important Caller IDInformation To use Caller ID and Call Waiting, you must be in an area where those services are available and you must subscribe to those services through your local phone company. Where Caller ID is offered, one or more options are generally available: • caller’s number only • caller’s name only • caller’s name and number If you subscribe to Call Waiting and Caller ID, the system can show you the incoming caller information, even when you are already talking
ملخص المحتوى في الصفحة رقم 12
The Basics Controls& F unctions Handset 1 6 2 7 3 8 4 9 14 10 15 16 11 17 5 12 18 19 13 20 21 22 1. Handset Antenna 12. */TONE key 2. Headset Jack Cover 13. SPEAKER key 14. key (up) 3. Belt Clip Hole 15. key (end call) 4. Speakerphone Speaker and Ringer 16. key (caller ID) 5. Handset Battery 17. key (down) Compartment 18. # key (pound) 6. New Message indicator 19. REDIAL/PAUSE key 7. Handset Earpiece 20. INTCM/HOLD key 8. Handset Display (intercom/hold) 9. Soft keys 21. Handset Microphone
ملخص المحتوى في الصفحة رقم 13
The Basics Base 3 4 5 6 7 8 22 23 9 10 11 1 12 13 14 2 15 16 17 18 24 1920 21 1. Base Charging Contacts 14. ANSWER key (answer on/off) 2. Base Speaker 15. DO NOT DISTURB key and 3. Base Antenna indicator 4. BACK/HOLD/INTERCOM 16. END/PAGE key key (end/find handset) 5. Base Display 17. / FLASH key and 6. Soft keys indicator (speaker/flash) 7. / key 18. Base Microphone (phonebook/ left) 19. CHARGE indicator 8. key (up) 20. */TONE key 9. MENU/SELECT key 21. # key (pound) 10. / key (ca
ملخص المحتوى في الصفحة رقم 14
The Basics Installation Before using your phone, carefully peel the protective film off the display. The film protects the handset window during shipment and is not necessary for use. Selecting a Location You can place the phone’s base on a desk or table, or mount it on a standard wall plate or directly on a wall. Select a location that is: • near an accessible AC outlet • near a telephone line jack • out of the way of normal activities • away from electrical machinery, electrical appliances
ملخص المحتوى في الصفحة رقم 15
The Basics The handset antenna is located on the back, above the ringer speaker. For maximum communication range, do not hold the handset in such a way as to cover the antenna by your hand. Also, place the Correct handset in the upright position while not in use so the antenna can pick up the signals from the base. When there is an obstacle such as a metal or concrete wall between the handset and the base, the operation might be affected. Try to keep the Incorrect path free from obstructio
ملخص المحتوى في الصفحة رقم 16
The Basics 3. Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the bottom of the base. 4. Route the adapter’s cord through the strain relief slot on the base of the phone. Then plug the adapter into a standard AC outlet. CAUTION: You must use a Class 2 power source that supplies 9V DC and delivers at least 400 mA (for the base)/210 mA (for the charger). Its center tip must be set to positive and its plug must fit the phone’s DC IN 9V jack. The supplied adapte
ملخص المحتوى في الصفحة رقم 17
The Basics 4. Insert the two tabs at the bottom of the narrow end of the supplied bracket into the base’s lower tab slots. Then press down on the bracket’s latches and insert them into the upper slots. 5. Plug the adapter into a standard AC outlet. Plug the modular cord’s other end into a modular phone line jack. 6. For a wall plate, align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it. For direct wall mounting, route the telepho
ملخص المحتوى في الصفحة رقم 18
The Basics Connecting/Charging the Battery Pack The phone comes with a rechargeable nickel-metal hydride (Ni- MH) battery pack in the handset. Before using your phone, you must connect the battery pack. Then charge it for about 15 - 20 hours. 1. Press down and slide off the battery compartment cover. 2. Lift the battery pack out of the compartment. 3. Plug the battery pack’s connector into the socket in the compartment (the connector fits only one way). Then place the battery pack in th
ملخص المحتوى في الصفحة رقم 19
The Basics • If the display is blank and the phone does not work, recharge the battery pack. (The battery power might be too low to light the display.) • About once a month, fully discharge the battery by keeping the handset off the base until LOW BATTERY flashes on the display. Otherwise, the battery pack loses its ability to fully recharge. • Using a damp cloth, clean the charging contacts on the handset about once a month. • If you are not going to use your phone for an extended period,
ملخص المحتوى في الصفحة رقم 20
The Basics Installthe Optional Power BackupBatter y in the Base The battery backup allows you to make and receive calls during a power failure. You can use any handset or the base, just as you would normally. 1. Push the battery tray on the right side of the base until it clicks. 2. The lock for the battery tray is released, and the battery tray comes out halfway. 3. Pull out the battery tray at all the way. 4. Place the battery pack in the battery tray facing the label of the
