ملخص المحتوى في الصفحة رقم 1
– Please Read –
Important Cordless Telephone Installation Information
DS1000/2000 900 MHz Cordless Telephone Installation Tips
• The cordless telephone base unit plugs into a digital station port.
• For best results, the base unit should be placed in line-of-site with its handset.
• Cordless telephone range and reception can vary from site to site. Some of the things that
may adversely affect range and reception are:
- Placing the base against or close to a wall (particularly if the
ملخص المحتوى في الصفحة رقم 2
This manual has been developed by NEC America, Inc. It is intended for the use of its customers and service personnel, and should be read in its entirety before attempting to install or program the system. Any comments or suggestions for improving this manual would be appreciated. Forward your remarks to: NEC America, Inc., Corporate Networks Group 4 Forest Parkway Shelton, CT 06484 cng.nec.com Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a
ملخص المحتوى في الصفحة رقم 3
Table of Contents Table of Contents Chapter 1: Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 DS1000/2000 900 Mhz Cordless Telephone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 4
Table of Contents Chapter 2: Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Feature Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Barge In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Call Coverage Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 5
Introduction Chapter 1: 1 Installation Introduction DS1000/2000 900 Mhz Cordless Telephone DS1000/2000 900 Mhz Cordless Telephone Overview The DS1000/2000 900 Mhz Cordless Telephone (P/N 80683)is a 900 Mhz digital nar- row band FM cordless telephone that provides mobility, flexibility and convenience for those who spend much of the workday away from their desk. Fully integrated with the DS1000/2000 system, DS1000/2000 900 Mhz Cordless Telephone offers many standard featur
ملخص المحتوى في الصفحة رقم 6
The Basics Basic Operation The Basics Basic Operation Using the Basic Features Answering Calls ■ Outside calls: Ring with 2 short rings followed by a long ring. ■ Intercom calls: Ring with 1 long ring. ■ To answer a call: Press TALK or the flashing line key. - If your handset is in the charger, lifting the handset answers the incoming call. Placing Calls ■ Intercom calls: Press TALK + Dial
ملخص المحتوى في الصفحة رقم 7
80683 - 1 The Basics Basic Operation Using Your Handset Ring Volume Ringer ● ● On when ring is turned off While idle, press to select ring type or vibrate 2-line, 16 ● While on a call, press character display to change handset receiving volume Voice Mail ● On if you have Talk Battery a Voice Mail message Ring On/Off Mute 1 ● Off while idle or Message Waiting. On when ● While on a call, press to mute ● battery is low ● On while on a call Dial *8 to respond microphone
ملخص المحتوى في الصفحة رقم 8
Installation Installing the Base Installation Installing the Base Connecting the Base To connect the base to the DS1000/2000 system (Figure 2: Installing the Base): Be sure to review Guidelines for Placing the Base, Figure 3: Correct Installation Methods, and Figure 4: Incorrect Installation Methods prior to connecting the base unit to the system. 1. Install a modular jack within 6 feet of the base and within 6 feet of an available standard (NEMA 5-15R) 120 VAC
ملخص المحتوى في الصفحة رقم 9
80683 - 3 625 Modular Jack Installation Installing the Base Guidelines for Placing the Base (Cont’d) • Always raise the base unit antenna to its full vertical position. • When installing more than one cordless in the same site: - Be sure the base units are at least 15 feet apart. • After installation, change each telephone’s channel by pressing CH on the handset. This will mini- mize interference between your cordless telephones. One-Pair Cross Connect (To digital keyset port) 1 Digital Keyset J
ملخص المحتوى في الصفحة رقم 10
80683 - 6 80683 - 7 Installation Installing the Base Correct line-of-site installation, away from devices that cause interference or locations that block signal. Figure 3: Correct Installation Methods Foil backed insulated ceiling Metal studs Too close to another device that emits EMI Too close to other 900 Mhz devices Behind a door that can be closed, tinted windows or one way glass Figure 4: Incorrect Installation Methods 6 ◆ Chapter 1: Installation DS1000/2000 Cordless Telephone User Guide
ملخص المحتوى في الصفحة رقم 11
80683 - 14 Installation Wall-Mounting the Base Wall-Mounting the Base Mounting the Base on the Wall To mount the base on the wall (Figure 5: Mounting the Base on the Wall): 1. Run the base line cord in the wide wire channel as shown, but do not plug it into the base. 2. Run the AC adaptor cord in the narrow wire channel as shown, but do not plug it into the base. 3. Using suitable fasteners, attach the wall-mount bracket to the wall in the desired location. - To make the base easier to remove la
ملخص المحتوى في الصفحة رقم 12
80683 - 15 Installation Wall-Mounting the Base Mounting the Base to a Wall Plate To mount the base on a standard wall plate (Figure 6: Mounting the Base to a Standard Wall Plate): 1. Snap the base onto the wall-mount bracket. - Make sure the mounting ears fit all the way into their slots and the mounting tabs snap into place. 2. Run a customer-provided short line cord in the wide wire channel as shown and plug it into the base. 3. Run the AC adaptor cord in the narrow wire channel as shown and pl
ملخص المحتوى في الصفحة رقم 13
80683 - 2 Installation Installing the Battery Installing the Battery Installing the Battery in your Handset To install the battery in your handset (Figure 7: Installing the Handset Battery): 1. Slide the battery cover off of the handset. 2. Insert the battery lead into the battery connector. Be sure to observe the polarity of the connection by lin- ing up the black dot with the black wire. 3. Turn the battery around to it fits into the battery compartment. 4. Slide the battery cover back onto the
ملخص المحتوى في الصفحة رقم 14
80683 - 4 Installation Charging the Handset Charging the Handset Installing the Charger and Charging the Handset To connect the AC Adaptor to the charger (Figure 8: Installing the Charger): 1. Run the AC adaptor cord under the strain relief on the back of the charger as shown. 2. Plug the AC adaptor cord into the charger. 3. Plug the AC adaptor into AC outlet. 4. Insert the handset into the charger. The handset must charge 5-8 hours in its charger prior to initial use. When the handset is correc
ملخص المحتوى في الصفحة رقم 15
80683 - 11 80683 - 13 Installation Charging the Handset Wall-Mounting the Charger To wall-mount the charger (Figure 10: Wall-Mounting the Charger): 1. Choose a suitable location for the charger wall-mount bracket within 6 feet of an AC outlet. 2. Install suitable fasteners 1 3/16” apart, leaving the heads out about 1/4”. 3. Run the AC adaptor cord through the notch in the bottom of the wall-mount bracket and up through the rectangular cutout in the bracket. 4. Place the wall-mount bracket on th
ملخص المحتوى في الصفحة رقم 16
80683 - 9 80683 - 10 80683 - 8 Installation Using the Belt Clip Using the Belt Clip Installing the Belt Clip To install the belt clip (Figure 11: Installing the Belt Clip): ■ With the open end of the clip facing away from the antenna, snap the belt clip onto the handset. Snap prongs into slots Snap prongs into slots on other side Figure 11: Installing the Belt Clip To remove the belt clip (Figure 12: Removing the Belt Clip): ■ Gently pry the belt clip prongs out of the slots in the handset. Pry
ملخص المحتوى في الصفحة رقم 17
80683 - 17 Installation Using the Earloop Style Headset with your Cordless Telephone Headset with y Using the Earloop Style our Cordless Telephone Installing Headset P/N 750638 (M145 Earloop Style) 1 Figure 13: Headset P/N 750638 (Ear Loop Style) Earloop Installation To install the earloop (recommended) (Figure 14: Installing the Ear Loop): ■ Hook the earloop onto the headset and snap into place. - Installation for the right ear is shown. For the left ear, hook the earloop on the opposite side o
ملخص المحتوى في الصفحة رقم 18
Installation Using the Earloop Style Headset with your Cordless Telephone Ear Cushion Installation To install the ear cushion (Figure 15: Installing the Ear Cushion): ■ Pull the ear cushion over the earpiece. Ear cushion Pull over earpiece Figure 15: Installing the Ear Cushion 14 ◆ Chapter 1: Installation DS1000/2000 Cordless Telephone User Guide 80683 - 18
ملخص المحتوى في الصفحة رقم 19
80683 - 16 Installation Using the Earloop Style Headset with your Cordless Telephone Connecting the Headset and Using the Controls To connect the headset and use the controls (Figure 16: Connecting the Headset): ■ Plug the headset into the Headset Jack on the top of the handset. ■ Use the Microphone Volume control to adjust the volume of your headset’s microphone (i.e., your voice). ■ Use the Headset Receiver Volume control to adjust the volume of the receiver in your headset (i.e., your calle
ملخص المحتوى في الصفحة رقم 20
80683 - 19 Installation Using the Headband Style Headset with your Cordless Telephone Using the Headband Style Headset with your Cordless Telephone Installing Headset P/N 750637 (M175 Headband Style) Figure 17: Headset P/N 750637 (Headband Style) Optional Earloop Installation To install the optional earloop: ■ Snap the head band out of the ear piece. Figure 18: Installing the Optional Earloop 16 ◆ Chapter 1: Installation DS1000/2000 Cordless Telephone User Guide
