ملخص المحتوى في الصفحة رقم 1
Precautions of Use
The quality of communication depends on the location and
environment of the base and the handset. The 21828 must be kept
away from sources of excessive heat (radiators, direct sunlight, etc.)
and protected against vibrations and dust. Never allow your telephone
to come into contact with water or other liquids or with aerosols. To
reduce the risk of interference and optimize rece
ملخص المحتوى في الصفحة رقم 2
then be unable to make or receive calls in the event of an emergency. This is why we recommend that you also have a conventional telephone as a backup. The appliance is designed for connection to an analogue telephone line class TRT3 (telecommunications network voltage). ! Do not use your telephone to notify a gas leak when you are in the vicinity of the leak. It is recommended that you avoid using this device during electrical storms. IMPORTANT: Because cordless phones operate
ملخص المحتوى في الصفحة رقم 3
Installation Packaging Contents Model name: 21828 Solo Duo Base stations 1 1 Handsets 1 2 Power plugs 1 2 Telephone line 1 1 Batteries, type AAA, “1.2V 2 4 600mAh” Charging station 0 1 Operating 1 + 1 + instructions optional optional Please check the contents of the package carefully. If anything is missing or shows signs of transport damage, do NOT put the telephone into service! In such a case, contact either your sales outlet with the purchase receipt. N
ملخص المحتوى في الصفحة رقم 4
Getting Started Install and Charge the Battery Pack Insert two pieces AAA batteries in the compartment, ensuring correct polarity and close the compartment. Place the handset in the base station to charge for 14 hours prior for first use. If you don’t properly charge the phone, battery performance will be compromised. Warning: The handset does not work and damaged if the wrong batteries are inserted. Features We are very pleased that you have purchased th
ملخص المحتوى في الصفحة رقم 5
Menu Structure (Handset) 1 CALL LOG 2 PHONE BOOK 1 NEW ENTRY ENTER NO ENTER NAME NORMAL RING 2 LIST ENTRY VIP RING 1-10 3 EDIT ENTRY 4 DELETE 5 DELETE ALL CONFIRM? VOLUME [- - - - - ] 3 HANDSET 1 RINGER EXT RINGER MELODY 1-10 INT RINGER MELODY 1-10 2 HS NAME 3 PREFIX MEM 4 KEY TONE ON/OFF 5 AUTO ANS ON/OFF 6 CALL TIMER ON/OFF 7 DEFAULT CONFIRM? 8 REGISTER SEARCHING 4 BASE 1 BARRING ENTER PIN HANDSET
ملخص المحتوى في الصفحة رقم 6
Handset and Base Layouts Menu / down key / ▼ CID key / Asterisk key / * INT / OK INT / OK key Cancel C Mute key Redial / Pause key /Up key / P / ▲ External call key. Phone book key Flash key R # / Hash key / lock key Paging In-use / CID LED: Steady Flash: OFF-hook / Voice Mail Waiting Indicator (VMWI) 6
ملخص المحتوى في الصفحة رقم 7
LCD Display Battery icon Phone icon EXT External call icon INT Internal call icon CLI icon No ring icon Mute icon Key lock icon Aerial icon Up / Down arrow ▲ / ▼ Voice mail waiting indicator (VMWI icon) Using the Handset Telephone Using the telephone When the handset is inserted in the station charging unit, it starts to charge automatically. To optimize the battery performance, charge the handset battery for 14 hours prefer to first use. Note: This
ملخص المحتوى في الصفحة رقم 8
Press key to end the call. On hook dialing Dial the telephone number (delete any incorrect entries by pressing “C” key). Press key to carry out the conversation. Press key to end the call. VMWI/LED The VMWI/LED in the handset will flash when there are new voice message calls received. Icon turns on and the LCD display “Message” in the call log memory. This service need subscription to local operator and it supports the FSK CLI system only. Taking Calls When an external cal
ملخص المحتوى في الصفحة رقم 9
Browse: Press or key to browse through the CALL LOG memory. Or Call Back: Press key to call back. Or Delete: Press or hold “C” key two seconds to delete one or all the entries. Selection is made using or key. Or Save: Press key to enter the subscribers in the phone book. Enter the name and press “INT/OK” key. Note: 1. The CALL LOG symbol and display indicator only disappear after browsing through all the entries. 2. It is only possible to enter subscribers in the phone book
ملخص المحتوى في الصفحة رقم 10
Store Entries Press key until the PHONE BOOK menu appears and press “INT/OK” key. Press or key to select “NEW ENTRY” and press “INT/OK” key. Enter number (max. 25 digits) and press “INT/OK” key when finished. Enter name (max. 10 characters) and press “INT/OK” key when finished. Select the ringing tone with or key and press “INT/OK” key when finished. “MEM FULL” appear stand for memory full. List Entries / Edit Entries / Delete Entries Press key until the PHONE BOOK me
ملخص المحتوى في الصفحة رقم 11
Enter prefix number (e.g. access code of the subscriber you call most frequently). Press “INT/OK” key to confirm. Activating/Deactivating Automatic Call Answering The automatic call answering function enables the incoming call to be taken immediately when the handset is removed from the base station. Press key as often as necessary until the HANDSET menu appears and press “INT/OK” key. Press or key to select the submenu and press “INT/OK” key. Use or key to switch automatic
ملخص المحتوى في الصفحة رقم 12
Base Station Settings (using the Handset) Barring Calls The following options are available for selection for barring calls: Option Description DISABLE All telephone calls are possible. EXTERNAL All external calls are barred. NUMBER Define a number which should be barred, e.g. 0190 Press key until the BASE menu appears and press “INT/OK” key. Press or key to select the required submenu and press “INT/OK” key. Enter the PIN (factory setting is 0000) and press “INT/OK” key.
ملخص المحتوى في الصفحة رقم 13
Press or key to select the required submenu and press “INT/OK” key. Press or key to select the required dialing mode and press “INT/OK” key. Note: This Flash Time / Dialing mode is used only when dialing from handset. Use the Base switch when dialing from Base. Changing the PIN Press key until the BASE menu appears and press “INT/OK” key. Press or key to select the required submenu and press “INT/OK” key. Enter old PIN (0000) and press “INT/OK” key. Enter new PIN (e.g.
ملخص المحتوى في الصفحة رقم 14
General Product Care Simply wipe the base station with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static discharge. Troubleshooting Guide When you forget base PIN, following the procedure to Reset the units. ALL MEMORY AND SETTING WILL BE LOST. Refer to handset – Call Log Operation procedure, select DELETE ALL to delete all Call Log Memories in handset. Disconnect the line cord and AC power supply. Hold “PAGE” button and plug in the AC powe
