ملخص المحتوى في الصفحة رقم 1
Model 28011
Optional/Additional
5.8GHz Color Handset
User’s Guide
for use ONLY with
System 28031, TC28031,
28041 or TC28041 Series
ملخص المحتوى في الصفحة رقم 2
Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request,
ملخص المحتوى في الصفحة رقم 3
Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and () This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
ملخص المحتوى في الصفحة رقم 4
Table of Contents EquipmEnt Apprvo Al i nformA tion ........2 t EE l H p E on o E p A r tion ....................... 18 i E nt rfEE r ncE i nformA tion ....................3 Charge/in use inDiCator HEAring Aid c omp Atibility (HAc ) ........3 on the Base ..................................18 l E ic nsing ............................................3 Visual ring inDiCator c fc rf r AdiA tion ExposurE s t AtEmEnt 3 on the hanDset ...........................18 i ntroduction ...................
ملخص المحتوى في الصفحة رقم 5
Table of Contents p HonE b ook ..................................... 27 to Phone Book reCorD ...................35 aDDing Phone Book entries ............27 b Etl c lip And o ptionAl HEAdsE t ...... 35 storing the last numBer DialeD .....29 ConneCting the Belt CliP ..................35 inserting a Pause in the Dialing ConneCting an oPtional heaDset to the hanDset .................................35 sequenCe (of a storeD numBer) c HAnging tHE b AttEry ...................... 35 reVieWing Ph
ملخص المحتوى في الصفحة رقم 6
Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. Before You Begin Parts Checklist (for model 28011xx1) Make sure your package includes the items s
ملخص المحتوى في الصفحة رقم 7
Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interference
ملخص المحتوى في الصفحة رقم 8
Handset Layout RING INDICATOR EARPIECE display TALK/CALL BACK (button) MENU SELECT/MUTE (button) (button) CALLER ID-VOLUME CALLER ID-VOLUME (button) (button) PHONEBOOK SPEAKER (button) (button) REDIAL (button) rev (review button) skip (button) * EXIT (button) play (button) # PAUSE/ erase RINGER (button) (button) FLASH/ INTERCOM DELETE (button) microphone (button) 8
ملخص المحتوى في الصفحة رقم 9
Installing the Phone Installing the Handset Battery NOTE: You must connect the handset battery before using the cordless handsets. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Nickel- metal Hydride battery (Ni-MH) model 5-2660, which is compatible with this unit. 1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset. . Locate the battery compartment on the back of the handset. 3. Pl
ملخص المحتوى في الصفحة رقم 10
Registration YOU MUST REGISTER THE HANDSET TO THE MAIN BASE BEFORE USE! After the optional handset has charged for 16 hours on the extra charger, HANDSET NEEDS REGISTRATION shows in the display. 1. Press the SELECT button. HOLD BASE PAGE WAIT FOR BEEP shows in the display. (Your handset should be held near the base during registration process.) . Press and hold the page button on the base unit until you hear a tone at the handset. HANDSET X REGISTERED shows in the handset display, where X
ملخص المحتوى في الصفحة رقم 11
PHONE SETTING Set display language, set area code, register the handset to the base unit, name the handset , deregister the handset or reset to default setting. DISPLAY SETTING Choose a preset or downloaded image to be wallpaper of the idle display, set the contrast and color scheme. Phone Setting There are seven programmable menus available: Language, Area Code, Intercom Auto Answer, Handset Name, Registration, Deregistration and Default Setting. LANGUAGE 1. Make sure your phone is OFF (
ملخص المحتوى في الصفحة رقم 12
NOTE: To restore the default setting to “---”, press and release the FLASH/DELETE button when SET AREA CODE shows on the display. Handset Name This menu allows you to enter a name for the handset, which displays on the idle screen. From the PHONE SETTING menu; 1. Use the 6 or 5 button to scroll to HANDSET NAME. DANIEL . Press the SELECT button to enter the menu. 3. Use the number keys to enter a name (up to 15 characters). More than one letter is stored HANDSET NAM HANDSET NAME E in ea
ملخص المحتوى في الصفحة رقم 13
4. Select NO, if you do not want to deregister. 5. If you select YES, press the SELECT button to NO confirm. MOVE NEAR TO BASE displays for YES seconds, then NO YES CONFIRM? shows CONFIRM? on the display. 6. Use the 6 or 5 button to scroll to NO or DEREGISTRA DEREGISTRATI TION ON YES. The default is YES. 7. If you select YES, press the SELECT button to confirm. DE-REGISTER . . . shows on the display followed by a confirmation tone. Then, HANDSET X DEREGISTERED shows on the disp
ملخص المحتوى في الصفحة رقم 14
. Press the SELECT button to enter the menu. NO YES 3. Use the 6 or 5 button to scroll to NO or YES. The default is NO. 4. If you select YES, all the settings in the programmable menu are returned to factory D DEF EFA AUL ULT T SETTING SETTING default setting. You will hear a confirmation tone. Display Setting There are three programmable menus available; Wallpaper, Color Scheme and Set Contrast. WALLPAPER 1. Make sure your phone is OFF (not in talk COLOR SCHEME mode). SET CONTRAST
ملخص المحتوى في الصفحة رقم 15
Set Contrast This feature allows you change the contrast of the text displayed and the background. From the DISPLAY SETTING menu; 1. Use the 6 or 5 button to scroll to SET CONTRAST. . Press the SELECT button to enter the menu. 3. Use the 6 or 5 button to scroll to the 1 * 2 3 desired contrast, 1, 2 or 3. The default is *2. SET CONTRAST 4. Press the SELECT button to save your selection. You will hear a confirmation tone. Sound Setting There are three program
ملخص المحتوى في الصفحة رقم 16
. Press the SELECT button to enter the menu. REC RING TONE RING MELODY 1 3. Use the 6 or 5 button to scroll to the RING MELODY 2 desired ringer tone. The default is TONE 1. RING MELODY 3 4. Press the SELECT button to save your RING MELODY 4 SET RINGER TONE selection. You will hear a confirmation tone. Key Tone From the SOUND SETTING menu; 1. Use the 6 or 5 button to scroll to KEY ON TONE. OFF . Press the SELECT button to enter the menu. 3. Use the 6 or 5 button to scroll to the desire
ملخص المحتوى في الصفحة رقم 17
4. Use the number keys to enter your new 3-digit security code. 5. Press the SELECT button to save your selection. You will hear a confirmation tone. NOTE: If you make a mistake, key in the digits again or press the FLASH/DELTE button to erase all and re-enter. Ring to Answer This feature lets you select the number of times you want the phone to ring before the answering system answers the call. 1. Press the MENU button and use 6 or 5 button to scroll to ANSWERER. . Press the SELECT bu
ملخص المحتوى في الصفحة رقم 18
. Listen as the caller leaves a message. 3. Press the TALK/CALL BACK or SPEAKER buttons to speak to the person or press the SELECT button to stop screening the call. Telephone Operation CHARGE/IN USE indicator on the base The CHARGE/IN USE indicator is lit when the phone is in use or a handset is charging in the base charge cradle. It flashes when you receive a call. Visual Ring Indicator on the Handset The Visual Ring indicator is lit when the handset is in use. It flashes when you receive
ملخص المحتوى في الصفحة رقم 19
Flash/Call Waiting If you subscribe to the combined Call Waiting Caller ID service from your local telephone company, you will receive Caller ID information (if available) on Call Waiting calls. During a phone call, you will hear a beep to indicate another call is waiting on the line and Caller ID information for the waiting call shows on the handset display. • To connect to the waiting call, press the FLASH/DELETE button on the handset, and your original call is put on hold. • To switch be
ملخص المحتوى في الصفحة رقم 20
3. All registered handsets beep for two minutes and PAGING FROM BASE shows on each handset’s display. 4. To cancel the page, press the PAGE button on the base, or press the TALK/CALL BACK button or the *EXIT button on each handset. Handset to Handset Paging IMPORTANT NOTE: The following procedures can ONLY be done with Model 28011 and 28041 handsets. 1. Make sure the originating phone is OFF (not in talk mode). . Press the MENU button and use the 6 or 5 button to scroll to INTERCOM. 3.
