Soundcore LIBERTY-2-PRO user manual

To use the Soundcore Liberty 2 Pro earbuds, follow these steps:
1. Charging: Before first use, make sure the earbuds and charging case are sufficiently charged. Use the provided USB-C cable to charge the case and insert the earbuds into the case for charging.
2. Pairing: After charging, open the charging case and remove the earbuds. They will automatically enter pairing mode. On your smartphone or other Bluetooth-enabled device, go to the Bluetooth settings and select "Soundcore Liberty 2 Pro" to connect.
3. Wearing: Insert the earbuds into your ears. Choose the appropriate ear tips (there are multiple sizes) for a secure and comfortable fit.
4. Controls: The earbuds have touch-sensitive controls. Use the following gestures:
- Single tap: Play/Pause music, answer/end calls
- Double tap (right earbud): Skip to the next track
- Double tap (left earbud): Go back to the previous track
- Triple tap (either earbud): Activate the voice assistant
- Press and hold (right earbud): Increase volume
- Press and hold (left earbud): Decrease volume
5. Soundcore App: Download the Soundcore app from the App Store (iOS) or Google Play Store (Android). This app allows you to access additional features, customizable EQ settings, firmware updates, and more.
6. Charging and Storage: When you're done using the earbuds, place them back into the charging case. The case will automatically charge them. Ensure the lid is closed properly and use the USB-C cable to charge the case as needed.
7. Reset: If you experience any issues, you can try resetting the earbuds. Hold the touch panels on both earbuds for 10 seconds until the LED indicators flash red twice.
Refer to the user manual for more detailed instructions, troubleshooting tips, and additional features.

To pair your Soundcore Liberty 2 Pro earbuds, follow these steps:
1. Take both earbuds out of the charging case and make sure they are powered on. The LED lights on the earbuds should flash white.
2. On your device, go to the Bluetooth settings and turn on Bluetooth.
3. Open the Soundcore app on your device. If you don't have the app, you can download it from the App Store or Google Play Store.
4. In the Soundcore app, tap on the "+" icon in the top right corner to add a new device.
5. Find and select "Soundcore Liberty 2 Pro" from the list of available devices.
6. A pop-up will appear on your device's screen, asking for permission to pair with the Liberty 2 Pro. Tap "Pair" or "Connect" to proceed.
7. Once connected, the LED lights on the earbuds will turn solid white, indicating a successful pairing.
Your Soundcore Liberty 2 Pro earbuds are now paired with your device and ready to use. You can use the Soundcore app to customize the sound settings and access additional features.

There could be several reasons why one side of your Soundcore Liberty 2 Pro is not working. Here are some troubleshooting steps you can try:
1. Check the battery: Ensure that both earbuds are charged. If one earbud has low battery, it may not function properly. Try charging both earbuds and see if the issue is resolved.
2. Clean the earbuds: Sometimes, debris or earwax may accumulate on the earbuds, blocking the sound. Clean both earbuds using a soft cloth or alcohol wipes.
3. Reset the earbuds: Try resetting the earbuds by placing them in the charging case and pressing and holding the button on the case for around 10 seconds. This will reset the earbuds and may resolve any connectivity issues.
4. Update firmware: Ensure that the firmware on your Soundcore Liberty 2 Pro is up to date. You can do this by installing the Soundcore app on your smartphone and checking for any available updates.
5. Try pairing again: Disconnect the earbuds from your device and then pair them again. This can help establish a fresh connection and fix any connectivity issues.
6. Contact customer support: If none of the above troubleshooting steps work, it's best to reach out to Soundcore customer support for further assistance. They will be able to provide you with specific troubleshooting steps or guide you on how to get a replacement if required.

The Soundcore Liberty 2 Pro earbuds have LED indicators that give you information about the charging status. Here's how you can determine when your earbuds are fully charged:
1. Insert your earbuds into the charging case.
. Close the lid of the charging case.
3. Depending on the battery level, the LED indicators on the front of the charging case will indicate the charging status. There are three LEDs, each representing 33% battery capacity.
- If all three LEDs light up white and remain solid, it means that the earbuds and the charging case are both fully charged.
- If only one or two LEDs light up, it indicates the remaining battery level of the charging case.

Alternatively, you can check the battery level of the earbuds by connecting them to your smartphone through the Soundcore app. The app will show you the exact battery percentage of each earbud.