Renesas 3803L user manual

Summary of the content on the page No. 1

Renesas Starter Kit for 3803L
Quick Start



LCD module


E8a header
Application Board Interface


Reset switch
LCD module
connector

E8a emulator

Application Board Interface

Analog adjust

User LEDs

User switches

Voltage Conversion Board
(for QzROM microcontroller)



D007554_11_S01_V02

Summary of the content on the page No. 2

1. Installation Do not connect the E8a emulator hardware until the software support has been installed. 1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to CD root folder and double click on “setup.exe”. 2. The installer will ask you which language is to be used, please choose the appropriate one. 3. On the first screen of the installer proper, click . 4. The License Agreement will

Summary of the content on the page No. 3

24. On the “RSKM3803- Step 2” window: Click . 25. On the Project Generator Information window: Click . The project that is created has two configurations. The Release configuration can be used for the final release code version. The Debug configuration allows modifications to the configuration for debugging. 26. Select the Debug build configuration in the left hand drop down list on the toolbar. 27. Click on the “Build” icon to compile, assemble and link the project.

Summary of the content on the page No. 4

35. Right click on the download module listed in the left hand pane and select “Download”. The code will be downloaded to the microcontroller. This may take several seconds. 36. Click the button. The code will run and you will see the LEDs flash on the board. 37. Click the button. The code will stop and the source code will be opened at the current program counter. 5. Next Step After you have completed this quick start procedure, please review the tutorial