Summary of the content on the page No. 1
MediaStation Pro
Wireless Network
Multimedia Hard Drive
User Guide
English
1
Summary of the content on the page No. 2
Contents Introduction 3 Precautions 3 Specifi cations 3 Package Content 4 Product Overview 4 1. Use as External USB HDD 5 1.1 Copy Data via USB 5 1.1.1 Windows 2000, XP 5 1.1.2 Linux 6 1.1.3 Mac 6 2. Connect to PC via Network 6 2.1 Wired LAN Connection 6 2.2 Wireless LAN Connection 7 3. Shared File Playback (Stream) 9 3.1 Windows 2000 9 3.2 Windows XP 11 3.3 Windows Vista 13 4. Use USB Host 15 5. Connect to External AV Device 15 5.1 Connect Video Cable 15 5.2 Connect Audio Cable 16
Summary of the content on the page No. 3
Introduction MediaStation Pro fully supports HD (High Defi nition) fi les and can stream media fi les from a PC via wireless (802.11b/g) or wired LAN. It also has USB host that can support external USB storage devices and memory card readers.. • Wireless High Defi nition Multimedia Player • Features powerful media decoding chip -Sigma Design EM8621 Chip • Full HD fi le playback up to 1920 x 1080p • HDMI Video output • IEEE 802.11g(54Mbps) 802.11b(11Mbps) wireless standard / 10/100Mbs wired LAN • Wi
Summary of the content on the page No. 4
HDD File System NTFS / FAT32 (Preformatted to FAT32) TV Type NTSC / PAL Video Format AVI : MS-MPEG4v3/XviD/WMV9 (Not support XviD which has GMC option applied) WMV : WMV9 ASF : WMV9 MP4 : MPEG4 Video DAT : MPEG1 VOB : MPEG2 MPG/MPEG : MPEG1/MPEG2 TP/TS/TRP : HD-MPEG2/SD-MPEG2 ISO, IFO Audio Format MP3, OGG, WAV, WMA Photo Format JPG/JPEG, PNG, BMP Video Output COMPOSITE S-VIDEO HD COMPONENT Y, Pb, Pr (480p, 720p, 1080i) HDMI (480p, 720p, 1080i, 1080p) Audio Output STEREO L-R S/PDIF Digital Outp
Summary of the content on the page No. 5
1. Use as External USB HDD 1.1 Copy Data via USB It is possible to use as a external USB hard disk drive in case of inserting hard disk into MediaStation PRO. You can copy data from your PC to built-in HDD of MediaStation Pro via USB. It is possible to play media fi les at the hard disk on TV set. * When connecting PC, you have to connect power cable of MediaStation Pro 1.1.1 Windows 2000, XP, Vista 1) After connecting MediaStation Pro and plug power cable, Windows 3) After copying data, remove
Summary of the content on the page No. 6
1.1.2 Linux Manual Mount ✓ It can be available on Linux 2.4 higher. Connect MEDIASTATION PRO -> Power On MEDIASTATION PRO -> Check the detection with [fdisk] -> make Mount Pointer (ex. mediatest) Automatic Mount at Folder Mount(/mnt) -> Edit [/etc/fstab] -> add the following; After booting, do log-in. mount –t vfat /dev/sda /mnt/mediatest (in case of FAT32 HDD) Connect MEDIASTATION PRO -> Power On MEDIASTATION PRO -> mount –t ntfs /dev/sda /mnt/mediatest (in case of FAT32 HDD) Check the det
Summary of the content on the page No. 7
2.2 Wireless LAN Connection MediaStation Pro supports two types of wireless structure-Infrastructure mode & Ad-Hoc mode. Infrastructure Mode Ad-Hoc Mode Wireless LAN connection type with Wireless Access Point. 1:1 wireless LAN connection type between wireless adapter and MediaStation Pro without wireless access point. ✓ Note Wireless Access Point (Infrastructure Mode) or Wireless Adapter (Ad-Hoc Mode) is required for wireless connection. IEEE 802.11g wireless standard is recommended for better
Summary of the content on the page No. 8
✓ Note: When connecting Ad-Hoc Mode, manual setting of IP Address and Subnet mask will be needed. Manual setting of IP address and Subnet mask of wireless adapter and MediaStation Pro will be required. Disable DHCP and enter “IP Address” and “Subnet mask”. IP address must be different between MediaStation Pro and wireless adapter, subnet mask must be the same for both MediaStation Pro and wireless adaptor. Example: MediaStation Pro: IP Address(192.168.10.2) Subnet(255.255.255.0) ==> Wireless ad
Summary of the content on the page No. 9
3. Shared File Playback (Stream) After connecting LAN cable, you have to set network confi gurations of both Computer and MediaStation Pro. *It is possible to assign IP address and Subnet Mask of MediaStation Pro as dynamic or static. 3.1 Windows 2000 1. Select a folder which you want to share. Right-click the folder and click ‘Sharing’ in pop menu. 2. Check ‘Share this folder’ and write ‘share name’. For example, “My Movie” 4. After that, the shared folder will be displayed as following ✓ M
Summary of the content on the page No. 10
6. Check ‘User cannot change password’ and ‘Password never For example, expires’. IP address: 192.168.1.3 Subnet mask: 255.255.255.0 ✓ If you have already been ‘obtained an IP address automatically’ from DHCP Server or IP Router on your local area network, you don’t need to write specifi c IP address 7. Move to [Control Panel>Network and Dial-up Connections], and absolutely. Use ‘Obtain an IP address automatically’ or write IP address & Subnet mask that DHCP Server or IP Router provide. se
Summary of the content on the page No. 11
3.2 Windows XP 1. Select a folder which you want to share. Right-click the folder and click ‘Sharing and Security’ in pop menu. 5. Check ‘User cannot change password’ and ‘Password never expires’. 2. Check ‘Share this folder on the network’ and write ‘Share name’. For example, “My Movie” ✓ Make sure to write ‘share name’ within 12 characters in English. 6. Move to [Control Panel>Network connections], and select ‘Local area connections’ properties by right click of mouse. ✓ If you can’t fi nd
Summary of the content on the page No. 12
7. Double click ‘Internet Protocol (TCP/IP)’ that you want to use on 9. At above number 7) fi gure, click ‘Advanced’ Tab. Disable ‘Internet your computer. Connection Firewall’. ✓ If you use service pack 2, refer to the following fi gures. Click ‘Settings’ at ‘Windows Firewall’ 8. Check ‘Use the following IP address’, and write ‘IP address’ & ‘Subnet mask’ that you want to use. For example, IP address: 192.168.1.3 Subnet mask: 255.255.255.0 Check ‘Off’ and click ‘OK’ ✓ If you have already bee
Summary of the content on the page No. 13
10. Set the network confi gurations of MediaStation Pro. After writing, press [SETUP] again for saving confi gurations. ✓ If you have already been provided dynamic IP address from DHCP Server or IP Router ✓ You have to connect MediaStation Pro to TV set for this setup. See “6.1 Connect Video on your local area network, you don’t need to write static IP address absolutely. Use Cable”. ‘DHCP on’ or write IP address & Subnet mask that DHCP Server or IP Router provide. ✓ Check ‘IP address obtained
Summary of the content on the page No. 14
2. Disable “Firewall” c. make a folder you want to share. a. Click Start > Setting > Control Panel > Security > Windows Firewall on / off d. You will get a popup “Choose people to share with” then b. Click at ‘Off (not recommended) select “Everyone (All users in this list) and press “Add” button. e. After you register the user account, then click “Share” button. 3. Setup of Network and Sharing Center a. Click Start > Setting > Control Panel > Network and Internet > Network and Sharing
Summary of the content on the page No. 15
4. Using the USB Host ✓ Note: How to eject the tray of external USB ODD (Optical Disk Drive) Stop playback and press number [3] button in order to eject the tray of external USB ODD. In addition, original DVD title with CSS Lock should not be played when connecting with USB host, but it is possible to play other format like XviD. ✓ Note: It is not possible to guarantee compatibility with all USB devices available in the marketplace. The MediaStation Pro has been tested on a variety of devices f
Summary of the content on the page No. 16
5.2 Connect Audio Cable MediaStation Pro supports 3 type of audio output; “Stereo, Coaxial, Optical”. Use the audio connection that your TV or Audio system supports. Normally TV supports stereo audio connection, and this package includes a stereo audio cable. ① Stereo L / R (Supplied) Red (right) Connect to Audio RED of TV White (Left) Connect to Audio White of TV Connect to Composite Yellow (CVBS) (CVBS) Jack of TV ② Optical ( ): Optical Cable for Digital 5.1 ch. (not supplied) OPTICAL ( ) C
Summary of the content on the page No. 17
6. Basic Setup 6.1 Video Setup This is the guide for setting the video output of your MediaStation Pro. ✓ If you can not see a picture after connecting video cable, check the following: 1. “TV “– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user manual. 2. “MediaStation Pro” – Switch to Video Output Mode: Press [TV OUT] button repeatedly. Whenever you press [TV OUT], video output signal is changed. TV Video Input Mode MEDIASTATION PRO
Summary of the content on the page No. 18
6.3 Network Setup It is possible to obtain an IP address automatically from DHCP Server or IP Router, or set the specifi c IP address. Check your network environment. ✓ Note DHCP On: You can use this option when it is possible to obtain IP address automatically from DHCP Server or IP Router. (Recommended for most users) DHCP Off: When it is not possible to obtain IP address automatically or you connect to your PC directly without DHCP Server or IP Router, you have to use this option. Just write
Summary of the content on the page No. 19
6.4 Wireless Setup Refer to “2. Connect to PC via Network > 2.2 Wireless LAN Connection”. 6.5 Wireless Security Setup Refer to “2. Connect to PC via Network > 2.2 Wireless LAN Connection”. 6.6 LED Setup It is possible to turn on or off a backlight LED of arrow button on the front side. When the LED disturbs you in night, turn off the LED. ① Turn on MediaStation Pro and press [SETUP] on Mode Selection screen. ② Move to ‘LED’ icon and press [OK]. Setup box will be displayed under icon menu. ③ Sele
Summary of the content on the page No. 20
6.8 Language Setup It is possible to set the preferable language. This language setup option may not be supported. In addition, this language will be applied on OSD Language, not subtitle. 6.9 Screen Ratio Setup This is guide for setting TV Type. You can use 4:3 Letter Box, 4:3 Pan Scan, and 16:9. Setup Procedure ① Turn on MediaStation Pro and press [SETUP] on Mode Selection screen. ② Move to ‘Scr. Rate’ icon and press [OK]. Setup box will be displayed under icon menu. ③ Select one out of ‘4:3
