Summary of the content on the page No. 1
Food Processing Center
Use and Care Instruction Manual
Model EKP110
Read and Understand Instruction Manual Before Use
EURO-PRO Operating LLC
Boston, MA, 02465
1 (800) 798-7398
www.euro-pro.com
Summary of the content on the page No. 2
IMPORTANT SAFEGUARDS Read Instruction Manual Before Use When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions before using the appliance. It is suggested that you keep these instructions in a safe place for future reference. 2. Your voltage must correspond to the voltage printed on the bottom of the appliance. 3. To protect against electrical shock, do not immerse the motor housing (base), cord, or plug in wate
Summary of the content on the page No. 3
Congratulations! As the owner of a new Food Processing Center, you are about to use a very versatile and powerful kitchen appliance that will quickly become an indispensable item in your kitchen. Euro-Pro products are engineered to meet the highest quality standards and are designed to offer the ultimate in ease of operation and convenience. IMPORTANT INFORMATION Please read all the following instructions carefully. IMPORTANT For your protection, this appliance has a double safety switch so
Summary of the content on the page No. 4
Food Processing Center 120V., 60 Hz., 600 Watts MAIN COMPONENTS AND ACCESSORIES 1. Processor Body 12. Spindle 24. Chopping Blade 2. Safety Cover 13. Processor Lid Protective Cover 3. Safety Cover/Blender 14. Food Pusher 25. Plastic Dough Blade Location 15. Storage Dome 26. Whisk Head 4. On/Off Speed Control Dial 16. Spatula 27. Whisk Beater 5. Pulse Button 17. Blade Holder 28. Juice Extractor/Filter 6. Drive Shaft 18. Fine Shredding Blade 29. Juice Extractor Lid 7. Storage Compartment 19. Coa
Summary of the content on the page No. 5
STORAGE The food processing center 3. Place the protective cover is designed so that most of (24) onto the chopping the attachments can be blade (23) and place into stored on-board. storage compartment. The highest part of the blade should be placed at the back of the compartment. Storage Compartment 4. Push shaft of whisk beater 1. Lift the lid of the storage (27) firmly into the hole. compartment (7). 5. Close the lid of the storage 2. Place whisk head (26) in compartment. storage com
Summary of the content on the page No. 6
INSTRUCTIONS FOR USE Operating Controls 5. Fit the spindle (12) onto the The processor and blender motor shaft (6) and the control dials have settings appropriate attachments as follows: onto the spindle. Refer to Off/1-9 + Max the following section Pulse “Fitting & Using the Tools”. The speed can be adjusted WARNING while the processor or TO REDUCE THE RISK OF blender is in use. INJURY, NEVER PLACE THE CUTTING BLADE ON Using the pulse button (5) THE BASE WITHOUT FIRST al
Summary of the content on the page No. 7
FITTING & USING THE TOOLS In general, all attachments which are fitted within the processor bowl must be firmly attached to the spindle (12). Always adjust the attachments until you are sure that they are correctly fitted. Chopping Blade (23) 1. Fit the processor bowl and spindle as detailed previously. 2. Remove the chopping blade protective cover (24) from the metal chopping blade. 3. Fit the blade over the spindle and press firmly into place. WARNING: USE EXTREME CAUTION - BLADES ARE SHA
Summary of the content on the page No. 8
Plastic Dough Blade (25) CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments. 1. Fit the processor bowl and spindle as described previously on page 4. 2. Fit the plastic dough blade over the spindle and press firmly into place. 3. Place the ingredients into the bowl. 4. Fit the lid and click into place as described in the “Setting Up” section (page 4). 5. Plug in the processor. 6. Turn the processor on
Summary of the content on the page No. 9
Slicing & Shredding Blades French Fry Blade (22) 1. Fit the processor bowl and spindle CAUTION: Make sure that the unit is as detailed previously. unplugged from the power source and the operating button is “OFF” before inserting or removing attachments. 1. Place the blade of your choice on the blade holder (17). Inserting the longer tab on the side of the blade first. 2. Press the other end of the blade until it 2. Using the finger holes in the clicks into place. french fry blade, fit i
Summary of the content on the page No. 10
Juice Extractor CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments. 1. Fit the processor bowl as detailed previously (page 4). 2. Fit the juice extractor/filter (28) into the processor bowl. 3. Fit the juice extractor lid (29) over the extractor and rotate counter clockwise ensuring that the lid tab has clicked into place. 4. Plug in processor. 5. Turn speed control to low (use only on low speed). 6. U
Summary of the content on the page No. 11
Blender (8) CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments and before cleaning. TO REMOVE THE 1. Remove the processor bowl BLENDER, YOU MUST FIRST and lid. UNLOCK AND 2. Remove the safety cover (2). REMOVE THE This can only be done once the PROCESSOR LID (A). processor lid has been THEN UNLOCK ANS removed. RMOVE THE 3. Place the blender (8) into its BLENDER (B) BY location on the p
Summary of the content on the page No. 12
CLEANING AND MAINTENANCE CAUTION: Make sure that the unit is unplugged from power source and control button is on “OFF” before inserting or removing any attachments and before cleaning. • Never immerse the unit, cord or plug in water or any other liquid. • Clean the motor block with a damp cloth only. • Only the stainless steel blades can be washed in the dishwasher. • All other parts can be cleaned in warm sudsy water using regular dishwashing liquid. • Cleaning the blender jar (flask): *Fill
Summary of the content on the page No. 13
ONE (1) YEAR LIMITED WARRANTY EURO-PRO OPERATING LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid. For customer service support, call 1 (800) 798-7398 or visit our web site www.eur
