EarthWay 12-volt ATV Broadcast Spreader user manual

Summary of the content on the page No. 1

Operation and Assembly Manual
for the
®
EarthWay M30 12-volt
ATV Broadcast Spreader
www.EarthWay.com

Summary of the content on the page No. 2

® EarthWay Electric Spreaders Model M30 1. Always wear protective clothing, eyewear, and dust mask to prevent contact with chemicals and other materials being ap- plied with this machine. 2. Remove any material in the hopper before lifting or detaching this machine from the vehicle. 3. Care must be taken when lifting this machine so as not to cause personal injury or equipment damage. Never attempt to in- stall this machine to the vehicle alone. Recruit the help of someone to assist when

Summary of the content on the page No. 3

EarthWay Products, Inc. P.O. Box 547 Bristol, Indiana 46507 USA EC DECLARATION OF CONFORMITY (Machinery Directive & Electromagnetic Compatibility Directives) Herewith we declare that the machinery described below is in accordance with the relevant health and safety requirements of the EC Council Directives concerned with Machinery and Electromagnetic Compatibility. No alterations are to be made to the machine without prior con- sultation and approval of EarthWay Products

Summary of the content on the page No. 4

Mounting How to attach to your ATV: locations Position the M30 centered on either the front or rear luggage rack on your ATV. Next using the 2 included “U-Bolts” con- nect the rear cross bars to the luggage rack cross bar closest to the seat or handlebars. Using the two, included “Double J Bolts” attach the M30 to the luggage rack securing it to the outer most rail on the luggage rack. Tighten all fasteners and cut any excessive bolt lengths that extend beyond the nuts on the “U & J-

Summary of the content on the page No. 5

EarthWay Electric Spreaders Rate Setting Worksheet Desired Application Rate (lbs/1,000 sq ft) _____________ To determine the desired application rate divide the area (sq ft) the bag should cover by the weight of the bag, then multiply by 1,000. (example: 5000 sq ft / 25 lbs = .005 x 1,000 = 5) ___________Weight of Material Placed in Hopper - __________Weight of Material Left in Hopper = __________Weight of Material Used 50 Length of Test Area x ______ Width of S

Summary of the content on the page No. 6

® EarthWay Products, Inc. P.O. Box 547 Bristol, Indiana 46507 (574) 848-7491 www.earthway.com HOW TO ORDER SPARE PARTS All spare parts listed herein may be ordered direct from the manufacturer, EARTHWAY PRODUCTS, INC. Be sure to give the following information when ordering. 1. Model Number 2. Part Number 3. Part Description Call (574)848-7491 or write for current prices. PARTS AND DESCRIPTIONS FOR MODEL M30 Key Part# Description Key Part# Description 1 77002 Rain Cover 15 251